I have just started with Bacula and would really like to get this to work. I have a Compaq SDT-10000 DDS-4 on /dev/sg0 I run Bacula on Clarkconnect Home Edition v 3.1. I have tried to follow the instructions to verify the functions of Bacula but I run into problem very early...
This is what happend when i run btape. [EMAIL PROTECTED] ~]# btape -c /etc/bacula/bacula-sd.conf /dev/sg0 Tape block granularity is 1024 bytes. btape: butil.c:258 Using device: "/dev/sg0" for writing. btape: btape.c:335 open_dev /dev/sg0 OK *test === Write, rewind, and re-read test === I'm going to write 1000 records and an EOF then write 1000 records and an EOF, then rewind, and re-read the data to verify that it is correct. This is an *essential* feature ... btape: btape.c:766 Bad status from rewind. ERR=dev.c:406 Rewind error on /dev/sg0. ERR=Invalid argument. Any input on this problem is very much appreciated. -- With kind regards John. http://www.pistolero.nu "In a world without walls and fences, who needs windows and gates??" ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
