Hello:
I'm still working on getting Bacula running here and have it working
well with 2 of 3 tape drives (A Pair of HP DD3 Autochangers C1553A)
however I'm having something of a problem with the 3rd device, an
Exabyte EZ-17 unit.
I can perform the btape test and auto perfectly, however I get in
trouble when working through the test sequence on p.296 of the 1.36.3
manual as shown below, the unload fails.
What do I need to do to make this function correctly? There is a tape
in the drive from slot 1 which is why its not showing.
[EMAIL PROTECTED] bin]# ./mtx-changer /dev/sg0 list 0 /dev/nst0 0
2:
3:
4:
5:
6:
7:
[EMAIL PROTECTED] bin]# ./mtx-changer /dev/sg0 slots 0 /dev/nst0 0
7
[EMAIL PROTECTED] bin]# ./mtx-changer /dev/sg0 unload
Unloading Data Transfer Element into Storage Element 1...mtx: Request
Sense: Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=70 (Current)
mtx: Request Sense: Sense Key=Illegal Request
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 3B
mtx: Request Sense: Additional Sense Qualifier = 90
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=no
mtx: MOVE MEDIUM from Element Address 82 to 1 Failed
At this point the drive is unresponsive to further commands from mt
for example mt -f /dev/nst0 offline fails as does anything else. I'm
guessing the unit needs a power cycle to reset at this point however
I'm not physically in front of it to tell at this time, it still
reports the following mtx status:
[EMAIL PROTECTED] ~]# mtx -f /dev/sg0 status
Storage Changer /dev/sg0:1 Drives, 7 Slots ( 0 Import/Export )
Data Transfer Element 0:Full (Storage Element 1 Loaded)
Storage Element 1:Empty
Storage Element 2:Full
Storage Element 3:Full
Storage Element 4:Full
Storage Element 5:Full
Storage Element 6:Full
Storage Element 7:Full
tapeinfo -f /dev/sg0
Product Type: Medium Changer
Vendor ID: 'EXABYTE '
Product ID: 'EXB-210 '
Revision: '1.06'
Attached Changer: No
SerialNumber: '38002496 '
SCSI ID: 0
SCSI LUN: 0
Ready: yes
[EMAIL PROTECTED] ~]# loaderinfo -f /dev/sg0
Product Type: Medium Changer
Vendor ID: 'EXABYTE '
Product ID: 'EXB-210 '
Revision: '1.06'
Attached Changer: No
Bar Code Reader: No
EAAP: Yes
Number of Medium Transport Elements: 1
Number of Storage Elements: 7
Number of Import/Export Element Elements: 0
Number of Data Transfer Elements: 1
Transport Geometry Descriptor Page: Yes
Invertable: No
Device Configuration Page: Yes
Can Transfer: Yes
[EMAIL PROTECTED] ~]# tapeinfo -f /dev/sg5
Product Type: Tape Drive
Vendor ID: 'EXABYTE '
Product ID: 'EXB-89008E00012F'
Revision: 'V39e'
Attached Changer: No
SerialNumber: '0060089150'
MinBlock:1
MaxBlock:245760
SCSI ID: 6
SCSI LUN: 0
Ready: yes
BufferedMode: yes
Medium Type: 0xd2
Density Code: 0x27
BlockSize: 0
DataCompEnabled: yes
DataCompCapable: yes
DataDeCompEnabled: yes
CompType: 0x10
DeCompType: 0x10
Block Position: 2
[EMAIL PROTECTED] ~]#
[EMAIL PROTECTED] ~]# loaderinfo -f /dev/sg5
Product Type: Tape Drive
Vendor ID: 'EXABYTE '
Product ID: 'EXB-89008E00012F'
Revision: 'V39e'
Attached Changer: No
Bar Code Reader: No
EAAP: No
Transport Geometry Descriptor Page: No
Device Configuration Page: No
===[George R. Kasica]=== +1 262 677 0766
President +1 206 374 6482 FAX
Netwrx Consulting Inc. Jackson, WI USA
http://www.netwrx1.com
[EMAIL PROTECTED]
ICQ #12862186
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
