On Wednesday 20 July 2005 16:27, Arno Lehmann wrote:
> Hello,
>
> the following has been discussed before. I was able to reproduce the
> following:
>
> I use a 6-slot autoloader.
> I have a query to report which tapes are loaded in the slots.
> I insert a magazine with six cartridges and do 'update slots scan
> storage=HPDAT"
> After that, the query correctly reports the tapes in all six slots.
> The backup running first uses the tape already loaded in the drive after
> the scan.
> One tape is filled, bacula changes the tape, but now the report doesn't
> show the tape just unloaded.
What report?
>
> When I manually update the volume information, everything goes as expected.
What Volume information? I don't understand what you are updating.
> When I manually unload the tape from the drive before the job requests a
> tape, everything works normal, too: bacula sees the drive is empty and
> loads a tape automatically.
>
> Could somebody verify this?
I don't understand the problem for the reasons noted above.
Now would be a good time to take the pain an upgrade to 1.37.30. If you still
have the problem, I can probably fix it before releasing the software in the
next few weeks.
--
Best regards,
Kern
(">
/\
V_V
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
