http://www.bacula.org/rel-manual/Autochangers_Support.html#SECTION000271000000000000000
.. says that the label command should ask the operator of the ( source ) slot
of the volume that is being labeled:
"That each Volume (tape) to be used must be defined in the Catalog and have a
Slot number assigned to it so that Bacula knows where the Volume is in the
autochanger. This is generally done with the label command. See below for
more details."
However, I am not prompted for the slot number ( see below ). I know I can
change it in the catalog .. just wondering if what I am seeing is the correct
behaviour of the label command when using an autochanger:
*label
The defined Storage resources are:
1: File
2: DLT8000
Select Storage resource (1-2): 2
Enter new Volume name: DailyPool-01
Defined Pools:
1: Default
2: FullBackupPool
3: DailyPool
Select the Pool (1-3): 3
Connecting to Storage daemon DLT8000 at 10.0.21.20:9103 ...
Sending label command for Volume "DailyPool-01" Slot 0 ...
3000 OK label. Volume=DailyPool-01 Device=/dev/rmt/1mbn
Catalog record for Volume "DailyPool-01", Slot 0 successfully created.
Requesting to mount StorEdge L7 DLT8000 ...
3001 Device /dev/rmt/1mbn is mounted with Volume "DailyPool-01"
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
