...subsequently...
Eli K. Breen wrote:
> ..and here are my questions:
> i) How do I rotate tapes from within bacula itself and/or make
> bacula rotate tapes when it finds that the current tape is full.
> ii) Why do the btape test pass and rotate as perscribed, yet bacula
> itself will not rotate tapes properly?
>
using "label" to try and rotate tapes returns this:
*label
The defined Storage resources are:
1: File
2: HPLoader
Select Storage resource (1-2): 2
Enter new Volume name: bacula3
Enter slot (0 for none): 3
Automatically selected Pool: Default
Connecting to Storage daemon HPLoader at dmzbackup:9103 ...
Sending label command for Volume "bacula3" Slot 3 ...
3301 Issuing autochanger "loaded drive 0" command.
3991 Bad autochanger "loaded drive 0" command: ERR=Child exited with code 1.
3304 Issuing autochanger "load slot 3, drive 0" command.
3992 Bad autochanger "load slot 3, drive 0": ERR=Child exited with code 1.
Label command failed for Volume bacula3.
Do not forget to mount the drive!!!
*quit
However - prepending the device name to the aforementioned mtx-changer
command "loaded drive 0" command does return the appropriate slot, so
I'm not sure why this fails.
Ideas?
...inline...
Arno Lehmann wrote:
<snip>
+++++++++++
Storage {
Name = HPLoader
# Do not use "localhost" here
Address = dmzbackup # N.B. Use a fully qualified name here
SDPort = 9103
Password = "rVep0Pkg/+cmVMp1ve3G+QD8NY0uCtPXf1jS7BzWOv7k"
# Password = "i7HrvPzNvmdgdqLUh3gUb/7+c1vsB3Nae4ss3nLT4RQL"
# password for FileDaemon
Device = HP-Library
Media Type = DLT
Autoloader = Yes
}
+++++++++++++++++++++++++++++++++++++++++++
That should do it.
And, depending on your mtx-changer script, Offline on unmount in the
SDs config.
Arno
Assuming you meant "Autochanger=yes" [since Autoloader= isn't valid] is
a no go.
Here's what I get at the bconsole prompt:
16-Jun 18:10 dmzbackup-sd: End of Volume "bacula1" at 42:1103 on device
/dev/nsa0. Write of 64512 bytes got 0.
16-Jun 18:11 dmzbackup-sd: End of medium on Volume "bacula1"
Bytes=41,285,506,721 Blocks=639,967 at 16-Jun-2005 18:11.
16-Jun 18:11 dmzbackup-sd: Job beige.2005-06-16_17.06.41 waiting. Cannot
find any appendable volumes.
Please use the "label" command to create a new Volume for:
Storage: HP-Library
Media type: DLT
Pool: Default
...my quandry is as follows:
A) I have other tapes in the loader, but none of them are labeled
with bacula volume labels. (I've set the AutoLabel, so presumably that
will work.)
B) I have no way to change tapes without stopping bacula. (MTX,
btape, mtx-changer, and the actual tape library itself all see the
device as in use).
C) Stopping bacula will cause my job to die at 80% complete.
..and here are my questions:
i) How do I rotate tapes from within bacula itself and/or make
bacula rotate tapes when it finds that the current tape is full.
ii) Why do the btape test pass and rotate as perscribed, yet bacula
itself will not rotate tapes properly?
Many thanks,
-E-
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
