Hi,
just wanted to see if any has successfully used a DLT7000 in a DELL 7 slot
changer.
the unit responds to reading and writing on /dev/st0, tapeinfo on sg3
gives this output:
[EMAIL PROTECTED] bacula]# tapeinfo -f /dev/sg3
Product Type: Tape Drive
Vendor ID: 'QUANTUM '
Product ID: 'DLT7000 '
Revision: '172D'
Attached Changer: No
SerialNumber: 'CX839S0627'
MinBlock:1
MaxBlock:16777215
SCSI ID: 6
SCSI LUN: 0
Ready: no
any mtx commands seem to fail. looks like the tape is responding on the
sg3 channel rather than the controller.
[EMAIL PROTECTED] bacula]# ./mtx-changer /dev/sg3 list /dev/nst0 0
mtx: Request Sense: 70 00 02 00 00 00 00 16 00 00 00 00 04 00 00 00 00 00
00 00
READ ELEMENT STATUS Command Failed
[EMAIL PROTECTED] bacula]# mtx -f /dev/sg3 status
mtx: Request Sense: 70 00 02 00 00 00 00 16 00 00 00 00 04 00 00 00 00 00
00 00
READ ELEMENT STATUS Command Failed
[EMAIL PROTECTED] bacula]# mtx -f /dev/sg3 eject
I do have 3ware raid controllers, scisi IDE-cdrom emulation on this
machine and use the aic7xxx driver for the adaptec 2944 differential scsi
controller. Anything I might be overlooking?
-sww
--
No trees were harmed in the transmission of this message, however a large
number of electrons were seriously inconvenienced.
--
No trees were harmed in the transmission of this message, however a large
number of electrons were seriously inconvenienced.
--
No trees were harmed in the transmission of this message, however a large
number of electrons were seriously inconvenienced.
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
