Hello,
Stephan Holl wrote:
Dear List,
I have labeled a fresh tape which runs fine for now. But after a while
it stops working with the error quoted below:
<error>
Start Backup JobId 915,
Job=gdf- serverdaten.2005-05-22_01.05.03 22-May 02:15 data-sd: gdf-
serverdaten.2005-05-22_01.05.03 Error: block.c:552 Write error at
45:10368 on device /dev/tape. ERR=Input/ output error. 22-May 02:15
data-sd: gdf-serverdaten.2005-05-22_01.05.03 Error: Error writing final
EOF to tape. This tape may not be readable. dev.c:1213 ioctl MTWEOF
error on /dev/tape. ERR=Input/output error.
At this point I thought "DDS tape for sure!"
22- May 02:15 data-sd: End
of medium on Volume "incremental-004" Bytes=7,408,359,386
Blocks=114,866 at 22-May-2005 02:15. 22-May 02:16 data-sd: Job gdf-
serverdaten.2005-05-22_01.05.03 waiting. Cannot find any appendable
volumes.
</error>
THis is a DDS3-tape
:-)
with hardware-compression turned on, so 7 GB of
data should not be the end of the tape. Is this behavouir hardware or
software related?
Currently I have no physical access to the drive to see if the cleaning
tape should be used, indicated by a red light.
You can use the tapeinfo program to report the drive's status, and with
any drive from the last few years (say, since about 1996 :-) that should
give you the proper status. "Tape Alert" is the keyword you're looking for.
Any ideas are helpful.
Replace the cartridge. Clean the drive. Hold your thumbs :-)
Arno
Best
Stephan
--
IT-Service Lehmann [EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users