I am trying to test/learn the bacula package but already stumped. I have
a STK L10 library with one SDLT 220 tape drive.
I have set up the mx-changer and have tested thoroughly.
I start up bconsole ran setdebug 10 and run the command "mount SDLT1"
which SLDT is my storage device in bacula-sd.conf. I get the following
message:
Connecting to Storage daemon SDLT1 at banach.math.purdue.edu:9103
3000 OK setdebug=10
Connecting to Client Banach at banach.math.purdue.edu:9102
2000 OK setdebug=10
*mount SDLT1
3901 open device failed: ERR=dev.c:289 stored: unable to open device
/dev/rmt/1cbn: ERR=I/O error
This makes sense as I am trying to load a tape into /dev/rmt/1cbn.
What am I missing? Should not the mount command try and load the tape
into the tape drive?
Thanks
Robert
-------------------Below is my bacula-sd.conf file
------------------------------
##R##-banach->[317] ##> vi bacula-sd.conf
"bacula-sd.conf" 64 lines, 1601 characters
#
# Default Bacula Storage Daemon Configuration file
#
# For Bacula release 1.36.3 (22 April 2005) -- solaris 5.8
#
# You may need to change the name of your tape drive
# on the "Archive Device" directive in the Device
# resource. If you change the Name and/or the
# "Media Type" in the Device resource, please ensure
# that dird.conf has corresponding changes.
#
Storage { # definition of myself
Name = banach-sd
SDPort = 9103 # Director's port
WorkingDirectory = "/etc/opt/csw/var/bacula/working"
Pid Directory = "/etc/opt/csw/var/bacula/run"
Maximum Concurrent Jobs = 20
}
#
# List Directors who are permitted to contact Storage daemon
#
Director {
Name = banach-dir
Password = "LOsk8Z2zi6ugkIxriBx84+PVNjKArQP/5G21y0RGbksJ"
}
#
# Restricted Director, used by tray-monitor to get the
# status of the storage daemon
#
Director {
Name = banach-mon
Password = "+atbnD675Qc1BC419TIQOHfd1GAJnla7sSJwGius47W+"
Monitor = yes
}
# A Linux or Solaris tape drive
Device {
Name = SDLT1
Media Type = SDLT
Archive Device = /dev/rmt/1cbn
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Changer Command = "/opt/csw/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/changer/1
Autochanger = yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
#
# Send all messages to the Director,
# mount messages also are sent to the email address
#
Messages {
Name = Standard
director = banach-dir = all
}
_____________________________________________________________________
Robert P. McGraw, Jr.
Manager, Computer Systems EMAIL1: [EMAIL PROTECTED]
Purdue University ROOM: MATH-807
Department of Mathematics PHONE: (765) 494-6055
150 N. University Street FAX: (419) 821-0540
West Lafayette, IN 47907-2067 EMAIL2: [EMAIL PROTECTED]
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_idt12&alloc_id344&op=click
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
