On Thu, May 12, 2005 at 02:08:32PM -0400, Grant wrote: > I have Bacula configured on a Redhat Linux server with an SCSI attached > VXA 1x10 Autoloader (1 drive 10 slots). > My questions is how can I tell what tape it is going to use next, or can > I set the order, or does it just go sequentially?
If "Accept Any Volume" is set to 'yes' for your pool then it will probably accept any volume that has an "Append" status. If I remember correctly you can even see which volume is required next by running "status director" in the bconsole - it should be printed on the same line as the next scheduled job. I do not have a robot here but I'd probably load the cartridge with the appendable volumes that have some space left on it. Christoph -- ~ ~ ".signature" [Modified] 3 lines --100%-- 3,41 All ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
