Hi folks,
I had a label command freeze up today under 1.36.2. Here is what it
looked like. This is just an FYI and in case it triggers something
in an otherwise unrelated issue.
*label
Using default Catalog name=MyCatalog DB=bacula
The defined Storage resources are:
1: File
2: DLT
3: DLTRemote
Select Storage resource (1-3): 2
Enter new Volume name: DLT7000-015
Automatically selected Pool: Default
Connecting to Storage daemon DLT at bacula.unixathome.org:9103 ...
Sending label command for Volume "DLT7000-015" Slot 0 ...
End of Volume "DLT7000-015" at 0:0 on device /dev/nsa0. Write of
64512 bytes got 0.
CatReq Job= UpdateMedia VolName=DLT7000-015 VolJobs=0 VolFiles=1
VolBlocks=0 VolBytes=0 VolMounts=0 VolErrors=0 VolWrites=1 M
axVolBytes=0 EndTime=1114956778 VolStatus= Slot=0 relabel=0
InChanger=0 VolReadTime=0 VolWriteTime=0
^C
There were no messages on /var/log/messages.
Then I tried this:
[EMAIL PROTECTED]:~] $ sudo mt -f /dev/nsa0 status
Password:
mt: /dev/nsa0: Device busy
# OK, so the SD still has the tape, so I'll stop the daemons
[EMAIL PROTECTED]:~] $ sudo /usr/local/etc/rc.d/z-bacula.sh stop
Stopping the Bacula File daemon
Stopping the Bacula Storage daemon
Stopping the Bacula Director daemon
[EMAIL PROTECTED]:~] $ sudo mt -f /dev/nsa0 status
Mode Density Blocksize bpi Compression
Current: 0x1b:DLTapeIV(35GB) variable 85937 IDRC
---------available modes---------
0: 0x1b:DLTapeIV(35GB) variable 85937 IDRC
1: 0x1b:DLTapeIV(35GB) variable 85937 IDRC
2: 0x1b:DLTapeIV(35GB) variable 85937 IDRC
3: 0x1b:DLTapeIV(35GB) variable 85937 IDRC
---------------------------------
Current Driver State: at rest.
---------------------------------
File Number: 1 Record Number: 0 Residual Count 0
[EMAIL PROTECTED]:~] $ sudo mt -f /dev/nsa0 rewind
[EMAIL PROTECTED]:~] $ sudo mt -f /dev/nsa0 weof
[EMAIL PROTECTED]:~] $ sudo mt -f /dev/nsa0 weof
[EMAIL PROTECTED]:~] $ sudo mt -f /dev/nsa0 weof
[EMAIL PROTECTED]:~] $ sudo mt -f /dev/nsa0 weof
[EMAIL PROTECTED]:~] $ sudo mt -f /dev/nsa0 rewind
[EMAIL PROTECTED]:~] $ sudo /usr/local/etc/rc.d/z-bacula.sh start
Then the label went OK:
*label
The defined Storage resources are:
1: File
2: DLT
3: DLTRemote
Select Storage resource (1-3): 2
Enter new Volume name: DLT7000-015
Automatically selected Pool: Default
Connecting to Storage daemon DLT at bacula.unixathome.org:9103 ...
Sending label command for Volume "DLT7000-015" Slot 0 ...
3000 OK label. Volume=DLT7000-015 Device=/dev/nsa0
Catalog record for Volume "DLT7000-015", Slot 0 successfully
created.
Requesting to mount DLT ...
3001 Device /dev/nsa0 is mounted with Volume "DLT7000-015"
*
The tape in question had been used for testing DLT drives. I'd been
dumping data to the tape using dd, or perhaps tar.
--
Dan Langille : http://www.langille.org/
BSDCan - The Technical BSD Conference - http://www.bsdcan.org/
NEW brochure available at http://www.bsdcan.org/2005/advocacy/
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.
Get your fingers limbered up and give it your best shot. 4 great events, 4
opportunities to win big! Highest score wins.NEC IT Guy Games. Play to
win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
