Hello again, Just to clarify, so that no one panics. The bug I mentioned occurred only in the 2.5.x code for a relatively short time. Whether or not it actually hit you I cannot say, but in any case, the current versions are fixed, and the new code includes significant optimization compared to 2.4.x and older 2.5.x for Migration and Copy jobs.
Kern On Monday 19 January 2009 15:21:38 Pasi Kärkkäinen wrote: > On Mon, Jan 19, 2009 at 02:30:27PM +0100, Kern Sibbald wrote: > > Hello, > > > > These errors are not good. You may be losing data. I would treat your > > copies as being invalid or incomplete, unless you verify they are > > complete. The first step in verifying them would be to compare the Job > > report of the copy job to that of the original. If they are identical (# > > files, data size) then you may be OK. > > > > There was a bug in seeking on disks when the address exceeded 2GB, so you > > may be running into that. This particular problem is fixed in the recent > > beta release (as well as in the current SVN). I recommend you upgrade to > > the 2.5.28-b1 or later code and re-run your copy jobs where you have seen > > these errors. > > I'll verify Job reports and also upgrade to current SVN. > > I'm using "Maximum Volume Bytes = 8G" for the disk volumes, so it could be > the bug you mentioned. > > Thanks for the reply. > > -- Pasi > > > Regards, > > > > Kern > > > > On Monday 19 January 2009 13:51:21 Pasi Kärkkäinen wrote: > > > Sending to bacula-devel list.. I'm guessing these are not critical > > > errors? Just so I know if there's need for me to debug this or not.. > > > > > > On Wed, Nov 12, 2008 at 07:38:40PM +0200, Pasi Kärkkäinen wrote: > > > > Hello list! > > > > > > > > I'm testing Bacula 2.5.19 (upcoming 3.0.0) and copying jobs from disk > > > > pools to tape. > > > > > > > > I'm getting some errors during the copy process.. has anyone else > > > > seen these?: > > > > > > > > bacula-sd JobId 2994: Start Copying JobId 2994, > > > > Job=CopyPool3UncopiedToTape.2008-11-12_16.40.09.26 bacula-sd JobId > > > > 2994: Using Device "IBM-LTO3-Drive" > > > > bacula-sd JobId 2994: Ready to read from volume "Pool3-Vol-0090" on > > > > device "FSDevice3" (/mnt/backup1/pool03). bacula-sd JobId 2994: > > > > Forward spacing Volume "Pool3-Vol-0090" to file:block 0:218. > > > > bacula-sd JobId 2994: Error: block.c:1098 Volume data error at > > > > 0:2594608255! Short block of 2944 bytes on device "FSDevice3" > > > > (/mnt/backup1/pool03) discarded. bacula-sd JobId 2994: Error: > > > > read_record.c:148 block.c:1098 Volume data error at 0:2594608255! > > > > Short block of 2944 bytes on device "FSDevice3" (/mnt/backup1/pool03) > > > > discarded. bacula-sd JobId 2994: End of file 0 on device "FSDevice3" > > > > (/mnt/backup1/pool03), Volume "Pool3-Vol-0090" bacula-sd JobId 2994: > > > > End of Volume at file 0 on device "FSDevice3" (/mnt/backup1/pool03), > > > > Volume "Pool3-Vol-0090" bacula-sd JobId 2994: Ready to read from > > > > volume "Pool3-Vol-0091" on device "FSDevice3" (/mnt/backup1/pool03). > > > > bacula-sd JobId 2994: Forward spacing Volume "Pool3-Vol-0091" to > > > > file:block 0:218. > > > > > > > > bacula-sd JobId 2994: Error: block.c:1098 Volume data error at > > > > 0:2314368047! Short block of 3024 bytes on device "FSDevice3" > > > > (/mnt/backup1/pool03) discarded. bacula-sd JobId 2994: Error: > > > > read_record.c:148 block.c:1098 Volume data error at 0:2314368047! > > > > Short block of 3024 bytes on device "FSDevice3" (/mnt/backup1/pool03) > > > > discarded. bacula-sd JobId 2994: End of file 0 on device "FSDevice3" > > > > (/mnt/backup1/pool03), Volume "Pool3-Vol-0091" bacula-sd JobId 2994: > > > > End of Volume at file 0 on device "FSDevice3" (/mnt/backup1/pool03), > > > > Volume "Pool3-Vol-0091" bacula-sd JobId 2994: Ready to read from > > > > volume "Pool3-Vol-0092" on device "FSDevice3" (/mnt/backup1/pool03). > > > > bacula-sd JobId 2994: Forward spacing Volume "Pool3-Vol-0092" to > > > > file:block 0:218. > > > > > > > > However, the job terminates with: > > > > > > > > SD Files Written: 102,756 > > > > SD Bytes Written: 14,278,163,609 (14.27 GB) > > > > SD Errors: 0 > > > > SD termination status: OK > > > > Termination: Copying OK > > > > > > > > So.. does someone know what's going on? > > > > > > Any ideas? I'm still seeing these every now and then.. wondering what > > > they mean for real. > > > > > > -- Pasi ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Bacula-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-devel
