OK, as suggested, I tried MHV AVR tools, If I run make clean (or make all) I get the following errors....
> "make.exe" clean all The system cannot find the path specified. ECHO is off. -------- begin -------- ECHO is off. Cleaning project: rm -f DT-UP-DN-Select-0614.hex Then I get message box saying that "msys-intl-8.dll" is missing. So what's going on ? Thank you. On Fri, Mar 27, 2015 at 2:16 PM, Royce Pereira <royc...@gmail.com> wrote: > Thank you. > I'll try it and report back in 24 hrs. > > On Mar 27, 2015 1:47 PM, "vasi vasi" <funl...@gmail.com> wrote: >> >> Royce, I did that already. https://infernoembedded.com/products/avr-tools >> There is a make.exe inside. It works on my Win8.1 >> >> On Fri, Mar 27, 2015 at 9:22 AM, Royce Pereira <royc...@gmail.com> wrote: >>> >>> I mean that the make installed on my laptop is the same as the make >>> installed on my desktop, because they have been installed from the same >>> winAVR installer downloaded from source forge. >>> >>> But... Make (and therefore winAVR) works on my laptop, but not on my >>> desktop. >>> >>> The only difference is that I just installed it on my desktop, while I >>> had installed it on my laptop a few months ago. >>> >>> If there is an alternative that can execute makefiles under w 8.1, I'll >>> be happy to try it (do I just replace the make.exe inside winAVR)? Could you >>> post a link? >>> >>> Thank you. >>> >>> On Mar 27, 2015 12:47 PM, "vasi vasi" <funl...@gmail.com> wrote: >>>> >>>> Help me understand you. You are referring to >>>> Winavr2010 ... that package have a make executable included? Is not that >>>> too old? The MHVAVRTools has a more recent make executable which works just >>>> fine under Win8.1 >>>> >>>> On Fri, Mar 27, 2015 at 9:13 AM, Royce Pereira <royc...@gmail.com> >>>> wrote: >>>>> >>>>> This is a fresh install of windows 8.1. So I don't think there could be >>>>> another make installed. >>>>> >>>>> Also I am using the same winAVR installer everywhere. >>>>> >>>>> Thanks. >>>>> >>>>> On Mar 27, 2015 12:35 PM, "vasi vasi" <funl...@gmail.com> wrote: >>>>>> >>>>>> It is possible that there is an old make in the Winavr package? Is the >>>>>> computer choosing it instead of the working one? The one form the link I >>>>>> gave you (mhvavrtools) is working ok (as you know). >>>>>> >>>>>> On Fri, Mar 27, 2015 at 8:58 AM, Royce Pereira <royc...@gmail.com> >>>>>> wrote: >>>>>>> >>>>>>> I have been consistently avoiding Atmel studio. >>>>>>> >>>>>>> I tried have tried it and found it too large and cumbersome, and >>>>>>> painfully slow to load on older computers. >>>>>>> >>>>>>> I prefer to download the tool chain separately and use make to >>>>>>> compile. >>>>>>> >>>>>>> So basically the question is : how to use make in windows 8.1 to run >>>>>>> my existing avr-gcc makefiles ? >>>>>>> >>>>>>> Thank you! >>>>>>> >>>>>>> On Mar 27, 2015 12:13 PM, "vasi vasi" <funl...@gmail.com> wrote: >>>>>>>> >>>>>>>> Royce, >>>>>>>> >>>>>>>> Why you don't use Atmel Studio? >>>>>>>> >>>>>>>> On Fri, Mar 27, 2015 at 8:05 AM, Royce Pereira <royc...@gmail.com> >>>>>>>> wrote: >>>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> The above solution worked perfectly on my laptop running Win 8.1 >>>>>>>>> x64. >>>>>>>>> >>>>>>>>> But today (after a few months) I installed WinAVR 2010 on my >>>>>>>>> desktop >>>>>>>>> (Win 8.1 x64), and used the same method above. >>>>>>>>> >>>>>>>>> But here, it does not work! >>>>>>>>> >>>>>>>>> I will be grateful for any suggestions. Thank you ! >>>>>>>>> >>>>>>>>> On Thu, Sep 11, 2014 at 5:10 PM, Royce Pereira <royc...@gmail.com> >>>>>>>>> wrote: >>>>>>>>> > Thank you! >>>>>>>>> > Your link solved the issue ;-) >>>>>>>>> > >>>>>>>>> > Best regards, >>>>>>>>> > Royce >>>>>>>>> > >>>>>>>>> > On Sep 10, 2014 10:09 AM, "Dhakshinamoorthy, Soundararajan" >>>>>>>>> > <soundararajan.dhakshinamoor...@atmel.com> wrote: >>>>>>>>> >> >>>>>>>>> >> Perhaps you could give this a try, in case you haven't. >>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >> http://www.avrfreaks.net/forum/windows-81-compilation-error?name=PNphpBB2&file=viewtopic&t=137881 >>>>>>>>> >> >>>>>>>>> >> Thanks, >>>>>>>>> >> Soundararajan >>>>>>>>> >> ________________________________ >>>>>>>>> >> From: avr-gcc-list-bounces+sounderarajan.d=atmel....@nongnu.org >>>>>>>>> >> [avr-gcc-list-bounces+sounderarajan.d=atmel....@nongnu.org] on >>>>>>>>> >> behalf of >>>>>>>>> >> Royce Pereira [royc...@gmail.com] >>>>>>>>> >> Sent: 10 September 2014 09:11:19 >>>>>>>>> >> To: avr-gcc-list@nongnu.org >>>>>>>>> >> Subject: [avr-gcc-list] Winavr2010 on Windows 8.1 >>>>>>>>> >> >>>>>>>>> >> Hi, >>>>>>>>> >> >>>>>>>>> >> I’ve installed Winavr2010 on a Win 8.1 PC. >>>>>>>>> >> >>>>>>>>> >> Running ‘Make’ throws the following errors >>>>>>>>> >> (‘Cntr-6d-2X-72x65-0213.c’ is >>>>>>>>> >> my C file): >>>>>>>>> >> >>>>>>>>> >> No problems on Win 7. Please suggest what it is I need to do ? >>>>>>>>> >> >>>>>>>>> >> Thanks! >>>>>>>>> >> >>>>>>>>> >> > "make.exe" clean all >>>>>>>>> >> 0 [main] sh 4280 sync_with_child: child 4384(0x14C) died >>>>>>>>> >> before >>>>>>>>> >> initialization with status code 0xC0000142 >>>>>>>>> >> 30877 [main] sh 4280 sync_with_child: *** child state waiting >>>>>>>>> >> for >>>>>>>>> >> longjmp >>>>>>>>> >> /usr/bin/sh: fork: Resource temporarily unavailable >>>>>>>>> >> >>>>>>>>> >> -------- begin -------- >>>>>>>>> >> >>>>>>>>> >> Cleaning project: >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.hex >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.eep >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.cof >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.elf >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.map >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.sym >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.lss >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.o >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.lst >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.s >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.d >>>>>>>>> >> rm -f .dep/* >>>>>>>>> >> make.exe: *** [clean_list] Error -1073741502 >>>>>>>>> >> >>>>>>>>> >> > Process Exit Code: 2 >>>>>>>>> >> > Time Taken: 00:13 >>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >> Best Regards, >>>>>>>>> >> -- Royce Pereira >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Best Regards, >>>>>>>>> >>>>>>>>> -- Royce Pereira >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> AVR-GCC-list mailing list >>>>>>>>> AVR-GCC-list@nongnu.org >>>>>>>>> https://lists.nongnu.org/mailman/listinfo/avr-gcc-list >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Vasi >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Vasi >>>> >>>> >>>> >>>> >>>> -- >>>> Vasi >> >> >> >> >> -- >> Vasi -- Best Regards, -- Royce Pereira _______________________________________________ AVR-GCC-list mailing list AVR-GCC-list@nongnu.org https://lists.nongnu.org/mailman/listinfo/avr-gcc-list
