I have the same problem . Path seems to be ok .. (C:\WinAVR\bin;C:\WinAVR\utils\bin;.....)
----- Original Message ----- From: "Alex Shepherd" <[EMAIL PROTECTED]>
To: "'AVR-GCC-list'" <[email protected]> Sent: Friday, January 20, 2006 10:02 AM Subject: RE: [avr-gcc-list] [ANN] WinAVR 20060119 Released
Let me know if anything is broken.
Just installed latest WinAVR, did a "make clean" and then a "make" and complains about not being able to find the finding the include files in libc Here's what I get when I try and compile the demo sample: C:\WinAVR\examples\demo>make avr-gcc -g -Wall -O2 -mmcu=atmega8 -c -o demo.o demo.c demo.c:17:22: inttypes.h: No such file or directory demo.c:18:20: avr/io.h: No such file or directory demo.c:19:27: avr/interrupt.h: No such file or directory demo.c:20:23: avr/sleep.h: No such file or directory demo.c:27: warning: return type defaults to `int' demo.c: In function `ISR': demo.c:28: error: syntax error before "pwm" demo.c:29: error: syntax error before "direction" demo.c:31: error: `direction' undeclared (first use in this function) demo.c:31: error: (Each undeclared identifier is reported only once demo.c:31: error: for each function it appears in.) demo.c:34: error: `pwm' undeclared (first use in this function) demo.c:44: error: `OCR1A' undeclared (first use in this function) demo.c: In function `ioinit': demo.c:51: error: `TCCR1A' undeclared (first use in this function) demo.c:51: warning: implicit declaration of function `_BV' demo.c:51: error: `PWM10' undeclared (first use in this function) demo.c:51: error: `PWM11' undeclared (first use in this function) demo.c:51: error: `COM11' undeclared (first use in this function) demo.c:58: error: `TCCR1B' undeclared (first use in this function) demo.c:58: error: `CS10' undeclared (first use in this function) demo.c:67: error: `OCR1A' undeclared (first use in this function) demo.c:70: error: `DDRB' undeclared (first use in this function) demo.c:70: error: `PB1' undeclared (first use in this function) demo.c:73: error: `TIMSK1' undeclared (first use in this function) demo.c:73: error: `TOIE1' undeclared (first use in this function) demo.c:74: warning: implicit declaration of function `sei' demo.c: In function `main': demo.c:86: warning: implicit declaration of function `sleep_mode' make: *** [demo.o] Error 1 Renaming the new C:\WinAVR directory and reverting back to the previous WinAVR version and compiling the same code (i.e. the demo in the latest WinAVR) I get a clean compile as follows: C:\WinAVR-20060119\examples\demo>make avr-gcc -g -Wall -O2 -mmcu=atmega8 -c -o demo.o demo.c demo.c:27: warning: return type defaults to `int' demo.c: In function `ISR': demo.c:45: warning: control reaches end of non-void function avr-gcc -g -Wall -O2 -mmcu=atmega8 -Wl,-Map,demo.map -o demo.elf demo.o avr-objdump -h -S demo.elf > demo.lst avr-objcopy -j .text -j .data -O ihex demo.elf demo.hex avr-objcopy -j .text -j .data -O binary demo.elf demo.bin avr-objcopy -j .text -j .data -O srec demo.elf demo.srec avr-objcopy -j .eeprom --change-section-lma .eeprom=0 -O ihex demo.elf demo_eeprom.hex avr-objcopy -j .eeprom --change-section-lma .eeprom=0 -O binary demo.elf demo_eeprom.bin avr-objcopy -j .eeprom --change-section-lma .eeprom=0 -O srec demo.elf demo_eeprom.srec I had a browse through the docs and there was no obvious notes about any changes like this so I guess there must be some sort of environment variable missing that tells it where to find the libc include directories. Any ideas? Cheers Alex Shepherd _______________________________________________ AVR-GCC-list mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/avr-gcc-list _______________________________________________ AVR-GCC-list mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/avr-gcc-list
