[Thanks to Karl Berry for doing so much of work again, preparing for this release and even writing most of the following. ]
We are pleased to announce the GNU Automake 1.16.92 test release. This is a release candidate for the upcoming automake-1.17. It mostly attempts to eliminate a delay in configure runs in 1.16.90. Please test if you can. We're particularly interested in bugs or regressions in the actual Automake functionality. Some tests are already known to fail on some non-GNU/Linux systems with some configurations, and have open bugs. Barring patches, we won't be able to fix all such test failures for this release (or, likely, ever). Nonetheless, we do welcome all bug reports (and patches!), in the test suite or otherwise. For possible convenience, here is the open bug list: https://debbugs.gnu.org/cgi/pkgreport.cgi?package=automake See below for the detailed list of changes since the previous version, as summarized by the NEWS file. Download here: https://alpha.gnu.org/gnu/automake/automake-1.16.92.tar.gz https://alpha.gnu.org/gnu/automake/automake-1.16.92.tar.xz Please report bugs and problems to <bug-autom...@gnu.org> (instead of replying to this mail), and send general comments and feedback to <automake@gnu.org>, and patches to <automake-patc...@gnu.org>. Thanks to everyone who has reported problems, contributed patches, and helped test Automake! -*-*-*- For planned incompatibilities in a possible future Automake 2.0 release, please see NEWS-2.0 and start following the advice there now. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There have been 25 commits by 7 people in the 18 days since 1.16.90. Thanks to everyone who has contributed! The following people contributed changes to this release: Bruno Haible (2) Collin Funk (2) Jim Meyering (1) Karl Berry (15) Mike Frysinger (1) Paul Eggert (3) Yves Orton (1) ================================================================== Here is the GNU automake home page: https://gnu.org/s/automake/ For a summary of changes and contributors, see: https://git.sv.gnu.org/gitweb/?p=automake.git;a=shortlog;h=v1.16.92 or run this command from a git-cloned automake directory: git shortlog v1.16.90..v1.16.92 Here are the compressed sources: https://alpha.gnu.org/gnu/automake/automake-1.16.92.tar.gz (2.4MB) https://alpha.gnu.org/gnu/automake/automake-1.16.92.tar.xz (1.6MB) Here are the GPG detached signatures: https://alpha.gnu.org/gnu/automake/automake-1.16.92.tar.gz.sig https://alpha.gnu.org/gnu/automake/automake-1.16.92.tar.xz.sig Use a mirror for higher download bandwidth: https://www.gnu.org/order/ftp.html Here are the SHA1 and SHA256 checksums: bce896594482a4f3e6f627b3fa977ad29cd0c610 automake-1.16.92.tar.gz fENTlskkri7F3iol3Tput2hKD8NUBMbKQLPsWQjShhU= automake-1.16.92.tar.gz 7923d799567f8c44d2ec016b3af69c83c5a07343 automake-1.16.92.tar.xz n2R8mLMlFiAFWT89aOsMVTc+2toXiGkm9P+4Ko0M52I= automake-1.16.92.tar.xz Verify the base64 SHA256 checksum with cksum -a sha256 --check from coreutils-9.2 or OpenBSD's cksum since 2007. Use a .sig file to verify that the corresponding file (without the .sig suffix) is intact. First, be sure to download both the .sig file and the corresponding tarball. Then, run a command like this: gpg --verify automake-1.16.92.tar.gz.sig The signature should match the fingerprint of the following key: pub rsa4096/0x7FD9FCCB000BEEEE 2010-06-14 [SCEA] Key fingerprint = 155D 3FC5 00C8 3448 6D1E EA67 7FD9 FCCB 000B EEEE uid [ unknown] Jim Meyering <j...@meyering.net> uid [ unknown] Jim Meyering <meyer...@fb.com> uid [ unknown] Jim Meyering <meyer...@gnu.org> If that command fails because you don't have the required public key, or that public key has expired, try the following commands to retrieve or refresh it, and then rerun the 'gpg --verify' command. gpg --recv-keys 0x7FD9FCCB000BEEEE As a last resort to find the key, you can try the official GNU keyring: wget -q https://ftp.gnu.org/gnu/gnu-keyring.gpg gpg --keyring gnu-keyring.gpg --verify automake-1.16.92.tar.gz.sig ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ New in 1.17: * New features added - AM_PATH_PYTHON will, after checking "python", prefer any Python 3 version (latest versions checked first) over any Python 2 version. If a specific version of Python 2 is still needed, the $PYTHON variable should be set beforehand. - AM_PATH_PYTHON will also search for Python versions 3.20 through 3.10. It previously searched for 3.9 through 3.0. (bug#53530) - RANLIB may be overridden on a per-target basis. - AM_TEXI2FLAGS may be defined to pass extra flags to TEXI2DVI & TEXI2PDF. - New option "posix" to emit the special target .POSIX for make. (bug#55025, bug#67891) - Systems with non-POSIX "rm -f" behavior are now supported, and the prior intent to drop support for them has been reversed. The ACCEPT_INFERIOR_RM_PROGRAM setting no longer exists. (bug#10828) - Variables using escaped \# will trigger portability warnings, but be retained when appended. GNU Make & BSD Makes are known to support it. (bug#7610) - GNU Make's default pattern rules are disabled, for speed and debugging. (.SUFFIXES was already cleared.) (bug#64743) - For Texinfo documents, if a .texi.in file exists, but no .texi, the .texi.in will be read. Texinfo source files need not be present at all, and if present, need not contain @setfilename. Then the file name as given in the Makefile.am will be used. If @setfilename is present, it should be the basename of the Texinfo file, extended with .info. (bug#54063) - aclocal has a new option --aclocal-path to override $ACLOCAL_PATH. (https://lists.gnu.org/archive/html/automake-patches/2022-01/msg00029.html) - The missing script also supports autoreconf, autogen, and perl. (https://lists.gnu.org/archive/html/automake-patches/2015-08/msg00000.html) - test-suite.log now contains basic system information, and the console message about bug reporting on failure has a bit more detail. (bug#68746, bug#71421) - When using the (default) "parallel" test driver, you can now omit the output of skipped tests from test-suite.log by defining the variable IGNORE_SKIPPED_LOGS to a non-empty value. (bug#71422) * Bugs fixed - Generated file timestamp checks handle filesystems with subsecond timestamp granularity dynamically, greatly speeding up the sleep done by AC_OUTPUT when generating config.status (all packages) and Automake's make check. However, this subsecond-mtime support requires an autom4te from Autoconf 2.72 or later (or random test failures and other timing problems may ensue), as well as a Perl, sleep program, make program, and filesystem that all support subsecond resolution; otherwise, we fall back to a two-second granularity, not even testing the (common) 1s case since that would induce a 2s delay for all configure scripts in all packages on all systems that don't support subsecond mtimes. When everything is supported, a line "Features: subsecond-mtime" is now printed by automake --version and autom4te --version. To override this check and delay, e.g. to use 1 second: am_cv_filesystem_timestamp_resolution=1 export am_cv_filesystem_timestamp_resolution (commit 720a11531, https://lists.gnu.org/archive/html/automake-commit/2022-02/msg00009.html then bug#60808, bug#64756, bug#67670, bug#68808, bug#71652, history reviewed in https://lists.gnu.org/archive/html/automake/2024-06/msg00054.html and more info in surrounding threads.) - The default value of $ARFLAGS is now "cr" instead of "cru", to better support deterministic builds. (bug#20082) - Automake's make dist now uses -9 instead of --best with gzip, because Alpine gzip does not support --best. Also, GZIP_ENV is used only for compression, not decompression, because of the same system. (bug#68151) - Dependency files are now empty, instead of "# dummy", for speed. (https://lists.gnu.org/archive/html/automake/2022-05/msg00006.html) - Compiling Python modules with Python 3.5+ uses multiple optimization levels. (bug#38043) - If the Python installation "scheme" is set to posix_local (Debian), it is reset to either deb_system (if the prefix = /usr), or posix_prefix (otherwise). (bug#54412, bug#64837) - As a result of the Python scheme change, the installation directory for Python files again defaults to "site-packages" under the usual installation prefix, even on systems (generally Debian-based) that would normally use the "dist-packages" subdirectory under /usr/local. - When compiling Emacs Lisp files, emacs is run with --no-site-file to disable user config files that might hang or access the terminal; and -Q is not used, since its support and behavior varies. (bug#58102) - Emacs Lisp compilations respect silent make output. - Automake no longer incorrectly warns that the POSIX make variables $(*D) and the like are non-POSIX. Unfortunately, the make implementations which do not correctly implement all the POSIX variables are not detected, but this seems to have little impact in practice. (bug#9587) - Pass libtool tags OBJC and OBJCXX for the respective languages. (bug#67539) - distcleancheck ignores "silly rename" files (.nfs* .smb* .__afs*) that can show up on network file systems. (https://lists.gnu.org/archive/html/automake/2022-09/msg00002.html) - Pass any options given to AM_PROG_LEX on to AC_PROG_LEX. (bug#65600, bug#65730) - aclocal: recognize ; as path separator on OS/2 and Windows. (bug#71534) - Hash iterations with external effects now consistently sort keys. (bug#25629, bug#46744) - tests: avoid some declaration conflicts for lex et al. on SunOS. (bug#34151 and others) - tests: declare yyparse before use and use (void) parameter lists instead of (), to placate C23. (bug#71425) - Typos in code and other doc fixes. (bug#68003, bug#68004, et al.) * Obsolescence: - py-compile no longer supports Python 0.x or 1.x versions. Python 2.0, released in 2000, is currently the minimum required version.
signature.asc
Description: PGP signature
