Hi, What is required to add a new processor target to autoconf? I ask as we are currently looking at porting a unit testing framework (check.sf.net) to allow it to run on embedded systems. It currently uses autoconf so we were looking at simply extending the tests it does (basically all we need to add is "can fork? can use FILE*?") but the crucial point running configure for the embedded target.
As far as I can tell, we'd run on a desktop "./configure --target=avr-iar" and then configure needs to load a file containing the symbols for that target. How do I write this file? Although I've used configure many times and know roughly how it works, this is beyond me and the Autoconf manual is rather vague on this point. Thanks for any help, Ross Burton -- Ross Burton Software Engineer OneEighty Software Ltd Tel: +44 20 8680 8712 Cygnet House Fax: +44 20 8680 8453 12-14 Sydenham Road [EMAIL PROTECTED] Croydon, Surrey CR9 2ET, UK http://www.180sw.com./ ==================================================================== Under the Regulation of Investigatory Powers (RIP) Act 2000 together with any and all Regulations in force pursuant to the Act OneEighty Software Ltd reserves the right to monitor any or all incoming or outgoing communications as provided for under the Act
