Add hw_params for modules based on Atheros QCA9377-7 chipset like
8devices BLUE bean or SparkLAN WUBQ-159ACN.
Tested-on: QCA9377 hw1.1 USB 0.0.0.111
Signed-off-by: Tomas Paukrt <tomaspau...@email.cz>
---
drivers/net/wireless/ath/ath10k/core.c | 42 ++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c
b/drivers/net/wireless/ath/ath10k/core.c
index b329428..e2ababf 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -629,6 +629,48 @@ static const struct ath10k_hw_params
ath10k_hw_params_list[] = {
},
{
.id = QCA9377_HW_1_1_DEV_VERSION,
+ .dev_id = 0x9378,
+ .bus = ATH10K_BUS_USB,
+ .name = "qca9377 hw1.1 usb",
+ .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
+ .fw = {
+ .dir = QCA9377_HW_1_0_FW_DIR,
+ .board_size = QCA9377_BOARD_DATA_SZ,
+ .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
+ },
+ .rx_desc_ops = &qca988x_rx_desc_ops,
+ .hw_ops = &qca6174_ops,
+ .hw_clk = qca6174_clk,
+ .target_cpu_freq = 176000000,
+ .decap_align_bytes = 4,
+ .spectral_bin_discard = 0,
+ .spectral_bin_offset = 0,
+ .vht160_mcs_rx_highest = 0,
+ .vht160_mcs_tx_highest = 0,
+ .n_cipher_suites = 8,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
+ .target_64bit = false,
+ .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
+ .shadow_reg_support = false,
+ .rri_on_ddr = false,
+ .hw_filter_reset_required = true,
+ .fw_diag_ce_download = false,
+ .credit_size_workaround = false,
+ .tx_stats_over_pktlog = false,
+ .dynamic_sar_support = false,
+ .hw_restart_disconnect = false,
+ .use_fw_tx_credits = true,
+ .delay_unmap_buffer = false,
+ .mcast_frame_registration = false,
+ },
+ {
+ .id = QCA9377_HW_1_1_DEV_VERSION,
.dev_id = QCA9377_1_0_DEVICE_ID,
.bus = ATH10K_BUS_SDIO,
.name = "qca9377 hw1.1 sdio",
--
2.7.4
