Enable modem DSP and WiFI devices on the SM8150 HDK device. The HDK is manufactured by Lantronix, but it attributed to Qualcomm, so the calibration string uses Qualcomm as manufacturer.
For reference: ath10k_snoc 18800000.wifi: qmi chip_id 0x30224 chip_family 0x4001 board_id 0x55 soc_id 0x40060000 ath10k_snoc 18800000.wifi: qmi fw_version 0x32040163 fw_build_timestamp 2019-10-08 05:42 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.0-00355-QCAHLSWMTPLZ-1 ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000 ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0 ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790 ath10k_snoc 18800000.wifi: htt-ver 3.73 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1 ath10k_snoc 18800000.wifi: invalid MAC address; choosing random Signed-off-by: Dmitry Baryshkov <[email protected]> --- Note the device also uses updated wlanmdsp, so it will be updated with firmware-name for WiFi once [1] is merged. [ 68.236220] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds) [ 69.426700] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)o [1] https://lore.kernel.org/ath10k/[email protected]/ --- arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index de670b407ef1..6cb6f503fdac 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -609,6 +609,11 @@ &remoteproc_cdsp { firmware-name = "qcom/sm8150/cdsp.mbn"; }; +&remoteproc_mpss { + firmware-name = "qcom/sm8150/modem.mbn"; + status = "okay"; +}; + &remoteproc_slpi { status = "okay"; @@ -713,3 +718,14 @@ &usb_1_dwc3_ss { &usb_2_dwc3 { dr_mode = "host"; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; + + qcom,ath10k-calibration-variant = "Qualcomm_sm8150hdk"; +}; --- base-commit: abfb54bc2d2b925336c6ea9ae2b335e3867ceb89 change-id: 20240403-sm8150-hdk-wifi-74deaecaaecb Best regards, -- Dmitry Baryshkov <[email protected]>
