When using QCA6174 PCI devices working in station mode, after connected
to AP, tx bitrate is always '1.0 MBit/s' in output of command 'iw wlan0
station dump'. (QCA6174 SDIO devices are working fine.)
After this patch, it show correct bitrate:
Station c4:04:15:5d:97:22 (on wls1)
inactive time: 312 ms
rx bytes: 31496
rx packets: 173
tx bytes: 8625
tx packets: 46
tx retries: 0
tx failed: 0
signal: -76 [-88, -80] dBm
signal avg: -75 [-82, -77] dBm
tx bitrate: 39.0 MBit/s MCS 4
rx bitrate: 26.0 MBit/s MCS 3
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Signed-off-by: Wen Gong <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c
b/drivers/net/wireless/ath/ath10k/core.c
index 22b6937ac225..c4f098c4431f 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -334,6 +334,7 @@ static const struct ath10k_hw_params
ath10k_hw_params_list[] = {
.hw_filter_reset_required = true,
.fw_diag_ce_download = true,
.tx_stats_over_pktlog = false,
+ .supports_peer_stats_info = true,
},
{
.id = QCA99X0_HW_2_0_DEV_VERSION,
--
2.23.0
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
