Em 2017-08-10 12:00, [email protected]
escreveu:
Enviar submissões para a lista de discussão AsteriskBrasil para
[email protected]
Para se cadastrar ou descadastrar via WWW, visite o endereço
http://asteriskbrasil.org/mailman/listinfo/asteriskbrasil
ou, via email, envie uma mensagem com a palavra 'help' no assunto ou
corpo da mensagem para
[email protected]
Você poderá entrar em contato com a pessoa que gerencia a lista pelo
endereço
[email protected]
Quando responder, por favor edite sua linha Assunto assim ela será
mais específica que "Re: Contents of AsteriskBrasil digest..."
----------------------------------------
KHOMP: completa linha de placas externas FXO, FXS, GSM e E1
Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7
Intercomunicadores para acesso remoto via rede IP e telefones IP
Conheça todo o portfólio em www.Khomp.com
Tópicos de Hoje:
1. Problemas na ligação ([email protected])
2. Re: Problemas na ligação (Roger Pitigliani)
----------------------------------------------------------------------
Message: 1
Date: Thu, 10 Aug 2017 11:29:24 -0300
From: [email protected]
To: [email protected]
Subject: [AsteriskBrasil] Problemas na ligação
Message-ID: <[email protected]>
Content-Type: text/plain; charset=UTF-8; format=flowed
Bom dia.
Uso o Elastix, sempre funcionou legal.
Meu server tem 2 placas fxo tdm400 de 8 portas, porém tenho apenas 6
linhas
Dê um termpo para cá, tento efetuar alguma ligação e o telefone da
ocupado, as vezes, após 3 tentativas, a ligação vai.
O que pode ser?
Espero uma ajuda de algum dos amigos, desde já, grato
------------------------------
Message: 2
Date: Thu, 10 Aug 2017 11:52:34 -0300
From: Roger Pitigliani <[email protected]>
To: Asterisk Brasil <[email protected]>
Subject: Re: [AsteriskBrasil] Problemas na ligação
Message-ID:
<CADJSmcU8_GYxJJ7sSWVtie30U24Aw=x9ovhz3wlfbcnoeod...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Bom dia.
Vc chegou a testar canal por canal para ver se todas as 6 estão
funcionando
através do PBX e fora dele também (direto na linha)?
Pode ser algumas linhas ou módulos com problema, então ele pode estar
alternando as linhas e ora funciona ora não..
Poste logs de quando a chamada falha..
Abraço.
Em 10 de agosto de 2017 11:29, <[email protected]> escreveu:
Bom dia.
Uso o Elastix, sempre funcionou legal.
Meu server tem 2 placas fxo tdm400 de 8 portas, porém tenho apenas 6
linhas
Dê um termpo para cá, tento efetuar alguma ligação e o telefone da
ocupado, as vezes, após 3 tentativas, a ligação vai.
O que pode ser?
Espero uma ajuda de algum dos amigos, desde já, grato
_______________________________________________
KHOMP: completa linha de placas externas FXO, FXS, GSM e E1
Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7
Intercomunicador e acesso remoto via rede IP e telefones IP
Conheça todo o portfólio em www.Khomp.com
_______________________________________________
Para remover seu email desta lista, basta enviar um email em branco
para
[email protected]
--
--
Roger Pitigliani
[email protected]
Skype: roger.pitigliani
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL:
<http://asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20170810/9d02db49/attachment-0001.html>
------------------------------
_______________________________________________
AsteriskBrasil mailing list
[email protected]
http://asteriskbrasil.org/mailman/listinfo/asteriskbrasil
Fim da Digest AsteriskBrasil, volume 37, assunto 14
***************************************************
Ent"ao, testei todas as linhas, estão ok.
Liguei para minha central, linha por linha, e todas caíram na Ura
perfeitamente.
Meu problema é ao efetuar uma ligação, a linha da ocupada.
Já troquei dtmf e nada.
Segue detalhes pelo putty
login as: root
[email protected]'s password:
Last login: Thu Aug 10 11:19:51 2017 from 172.23.23.1
Welcome to Elastix
----------------------------------------------------
Elastix is a product meant to be configured through a web browser.
Any changes made from within the command line may corrupt the system
configuration and produce unexpected behavior; in addition, changes
made to system files through here may be lost when doing an update.
To access your Elastix System, using a separate workstation
(PC/MAC/Linux)
Open the Internet Browser using the following URL:
http://172.23.23.10
[root@Elastix ~]# rasterisk -vvvvvvvv
Asterisk 1.8.20.0, Copyright (C) 1999 - 2012 Digium, Inc. and others.
Created by Mark Spencer <[email protected]>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty'
for detail
s.
This is free software, with components licensed under the GNU General
Public
License version 2 and other licenses; you are welcome to redistribute it
under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1.8.20.0 currently running on Elastix (pid = 2644)
Verbosity was 7 and is now 8
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [26593578@from-internal:1] Macro("SIP/4020-00001005",
"user-cal
lerid,SKIPTTL,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/4020-00001005",
"AMPUSER=402
0") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/4020-00001005",
"0?report
") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/4020-00001005",
"1?Set(RE
ALCALLERIDNUM=4020)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/4020-00001005",
"AMPUSER=402
0") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/4020-00001005",
"AMPUSERCIDN
AME=Lucas") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/4020-00001005",
"0?report
") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/4020-00001005",
"AMPUSERCID=
4020") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/4020-00001005",
"CALLERID(al
l)="Lucas" <4020>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/4020-00001005",
"0?Set(CH
ANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/4020-00001005",
"1?conti
nue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] Set("SIP/4020-00001005",
"CALLERID(n
umber)=4020") in new stack
-- Executing [s@macro-user-callerid:20] Set("SIP/4020-00001005",
"CALLERID(n
ame)=Lucas") in new stack
-- Executing [s@macro-user-callerid:21] NoOp("SIP/4020-00001005",
"Using Cal
lerID "Lucas" <4020>") in new stack
-- Executing [26593578@from-internal:2] NoOp("SIP/4020-00001005",
"Calling O
ut Route: saidatel") in new stack
-- Executing [26593578@from-internal:3] Set("SIP/4020-00001005",
"MOHCLASS=d
efault") in new stack
-- Executing [26593578@from-internal:4] Set("SIP/4020-00001005",
"_NODEST=")
in new stack
-- Executing [26593578@from-internal:5] Macro("SIP/4020-00001005",
"record-e
nable,4020,OUT,") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/4020-00001005",
"1?check"
) in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] ExecIf("SIP/4020-00001005",
"0?MacroE
xit()") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/4020-00001005",
"0?Group:
OUT") in new stack
-- Goto (macro-record-enable,s,15)
-- Executing [s@macro-record-enable:15] GotoIf("SIP/4020-00001005",
"0?IN")
in new stack
-- Executing [s@macro-record-enable:16] ExecIf("SIP/4020-00001005",
"1?Macro
Exit()") in new stack
-- Executing [26593578@from-internal:6] Macro("SIP/4020-00001005",
"dialout-
trunk,1,26593578,") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/4020-00001005",
"DIAL_TRUNK=
1") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/4020-00001005",
"0?sub-p
incheck,s,1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/4020-00001005",
"0?disabl
etrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/4020-00001005",
"DIAL_NUMBER
=26593578") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/4020-00001005",
"DIAL_TRUNK_
OPTIONS=TtrWw") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/4020-00001005",
"OUTBOUND_GR
OUP=OUT_1") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/4020-00001005",
"1?nomax"
) in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/4020-00001005",
"0?skipou
tcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/4020-00001005",
"DIAL_TRUNK
_OPTIONS=TtrWw") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/4020-00001005",
"outbound
-callerid,1") in new stack
-- Executing [s@macro-outbound-callerid:1]
ExecIf("SIP/4020-00001005", "0?Se
t(CALLERPRES()=)") in
new stack
-- Executing [s@macro-outbound-callerid:2]
ExecIf("SIP/4020-00001005", "0?Se
t(REALCALLERIDNUM=4020)") in new stack
-- Executing [s@macro-outbound-callerid:3]
GotoIf("SIP/4020-00001005", "1?no
rmcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/4020-00001005",
"USEROUT
CID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/4020-00001005",
"EMERGEN
CYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/4020-00001005",
"TRUNKOU
TCID=") in new stack
-- Executing [s@macro-outbound-callerid:9]
GotoIf("SIP/4020-00001005", "1?tr
unkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12]
ExecIf("SIP/4020-00001005", "0?S
et(CALLERID(all)=)") in
new stack
-- Executing [s@macro-outbound-callerid:13]
ExecIf("SIP/4020-00001005", "0?S
et(CALLERID(all)=)") in
new stack
-- Executing [s@macro-outbound-callerid:14]
ExecIf("SIP/4020-00001005", "0?S
et(CALLERID(all)=)") in
new stack
-- Executing [s@macro-outbound-callerid:15]
ExecIf("SIP/4020-00001005", "0?S
et(CALLERPRES()=prohib_passed_screen)") in new stack
-- Executing [s@macro-dialout-trunk:12] GosubIf("SIP/4020-00001005",
"0?sub-
flp-1,s,1") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/4020-00001005",
"OUTNUM=265
93578") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/4020-00001005",
"custom=DAH
DI/g0") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/4020-00001005",
"0?Set(D
IAL_TRUNK_OPTIONS=M(setmusic^default)TtrWw)") in
new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/4020-00001005",
"dialout-
trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1]
MacroExit("SIP/4020-0000
1005", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/4020-00001005",
"0?bypas
s,1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/4020-00001005",
"0?custo
mtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/4020-00001005",
"DAHDI/g0/
26593578,300,TtrWw") in new stack
-- Called DAHDI/g0/26593578
-- DAHDI/1-1 answered SIP/4020-00001005
-- Executing [h@macro-dialout-trunk:1] Macro("SIP/4020-00001005",
"hangupcal
l,") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/4020-00001005",
"1?endmixmon
check") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] NoOp("SIP/4020-00001005", "End
of MIXMON
check") in new stack
-- Executing [s@macro-hangupcall:10] GotoIf("SIP/4020-00001005",
"1?nomeetme
mon") in new stack
-- Goto (macro-hangupcall,s,28)
-- Executing [s@macro-hangupcall:28] NoOp("SIP/4020-00001005", "End
of MEETM
E check") in new stack
-- Executing [s@macro-hangupcall:29] GotoIf("SIP/4020-00001005",
"1?noautomo
n") in new stack
-- Goto (macro-hangupcall,s,34)
-- Executing [s@macro-hangupcall:34] NoOp("SIP/4020-00001005",
"TOUCH_MONITO
R_OUTPUT=") in new stack
-- Executing [s@macro-hangupcall:35] GotoIf("SIP/4020-00001005",
"1?noautomo
n2") in new stack
-- Goto (macro-hangupcall,s,41)
-- Executing [s@macro-hangupcall:41] NoOp("SIP/4020-00001005",
"MONITOR_FILE
NAME=") in new stack
-- Executing [s@macro-hangupcall:42] GotoIf("SIP/4020-00001005",
"1?skiprg")
in new stack
-- Goto (macro-hangupcall,s,45)
-- Executing [s@macro-hangupcall:45] GotoIf("SIP/4020-00001005",
"1?skipblkv
m") in new stack
-- Goto (macro-hangupcall,s,48)
-- Executing [s@macro-hangupcall:48] GotoIf("SIP/4020-00001005",
"1?theend")
in new stack
-- Goto (macro-hangupcall,s,50)
-- Executing [s@macro-hangupcall:50] AGI("SIP/4020-00001005",
"hangup.agi")
in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/hangup.agi
-- <SIP/4020-00001005>AGI Script hangup.agi completed, returning 0
-- Executing [s@macro-hangupcall:51] Hangup("SIP/4020-00001005", "")
in new
stack
== Spawn extension (macro-hangupcall, s, 51) exited non-zero on
'SIP/4020-0000
1005' in macro 'hangupcall'
== Spawn extension (macro-dialout-trunk, h, 1) exited non-zero on
'SIP/4020-00
001005'
-- Hanging up on 'DAHDI/1-1'
-- Hungup 'DAHDI/1-1'
== Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on
'SIP/4020-0
0001005' in macro 'dialout-trunk'
== Spawn extension (from-internal, 26593578, 6) exited non-zero on
'SIP/4020-0
0001005'
-- Remote UNIX connection
-- Remote UNIX connection disconnected
Elastix*CLI>
_______________________________________________
KHOMP: completa linha de placas externas FXO, FXS, GSM e E1
Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7
Intercomunicador e acesso remoto via rede IP e telefones IP
Conheça todo o portfólio em www.Khomp.com
_______________________________________________
Para remover seu email desta lista, basta enviar um email em branco para
[email protected]
