On 03/06/2018 01:58 PM, Olivier wrote:
Hello,
I'm running load testing sessions.
My System Under Test is an asterisk 13 with 16GB, configured with maxfiles set
to 400 000.
This system is supposed do produce simple SIP trunking services without
transcoding.
The box sending call to my System Under Test is anabled with SIPp.
I'm banging on a 700 concurrent calls/50 CAPS limit I would like to improve, if
possible.
Tests are done with both signaling and media like this:
SIPp <---> SUT (asterisk 13) <---> Asterisk box echoing media
I checked bandwidth first and got 930 Mb/s on each leg (from SIPp to SUT or SUT
to echoing box) using iperf3 TCP testing though my target relies on UDP
My questions are:
1. Have you ever noticed a better scalability using UDP or TCP ?
2. Where do Retransmission I'm observing on SIPp console most probably come
from ? Network issues ? My SIPp not beeing correctly tuned ? Lack of resources
somewhere ?
3. Recommandations ? Suggestions ?
Best
I do network management for a living.
In your description, I see nothing to describe the network other than an
observed 930Mb/s.
What is the network configuration; What NIC(s), switches etc.
Treating these as effectively "unlimited" is a certain recipe for banging into
unexpected limits.
Different NICs and switchs can and do provide differing levels of performance.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
