also run mtp3d service on both servers,
On Sat, Dec 24, 2016 at 4:48 AM, Kashif Ali <kas...@kashifbukhari.com> wrote: > check p11 using same port as p8 > > [link-p11] > linkset => C > channels => 2-31 > schannel => 1@box1:50001 > firstcic => 97 > sls => 1 > stp => 3080 > echocancel => no > enabled => yes > > > > On Fri, Dec 23, 2016 at 4:36 PM, Daniel Fernandes <d...@t2change.com> > wrote: > >> Hi Kashif, >> >> first of all thanks for your reply. >> >> please ss7.conf below >> >> [linkset-A] >> enabled => yes >> enable_st => no >> use_connect => yes >> hunting_policy => seq_htl >> subservice => 0xc >> context => CALLS >> language => pt >> variant => ITU >> combined => mated-pair >> >> [linkset-B] >> enabled => yes >> enable_st => no >> use_connect => yes >> hunting_policy => seq_htl >> subservice => 0xc >> context => CALLS >> language => pt >> variant => ITU >> combined => mated-pair >> >> [linkset-C] >> enabled => yes >> enable_st => no >> use_connect => yes >> hunting_policy => seq_htl >> subservice => 0xc >> context => CALLS >> language => pt >> variant => ITU >> combined => mated-pair >> >> [link-p1] >> linkset => B >> channels => 1-31 >> schannel => >> firstcic => 1 >> enabled => yes >> >> [link-p2] >> linkset => B >> channels => 1-31 >> schannel => >> firstcic => 65 >> enabled => yes >> >> [link-p3] >> linkset => B >> channels => 1-31 >> schannel => >> firstcic => 129 >> enabled => yes >> >> [link-p4] >> linkset => B >> channels => 1-31 >> schannel => >> firstcic => 33 >> enabled => yes >> >> [link-p5] >> linkset => B >> channels => 1-31 >> schannel => >> firstcic => 97 >> enabled => yes >> >> [link-p6] >> linkset => B >> channels => 1-31 >> schannel => >> firstcic => 161 >> enabled => yes >> >> [link-p7] >> linkset => C >> channels => 1-31 >> schannel => >> firstcic => 1 >> enabled => yes >> >> [link-p8] >> linkset => C >> channels => 2-31 >> schannel => 1@box1:50001 >> firstcic => 65 >> stp => 3050 >> sls => 1 >> echocancel => no >> enabled => yes >> >> [link-p9] >> linkset => C >> channels => 1-31 >> schannel => >> firstcic => 129 >> enabled => yes >> >> [link-p10] >> linkset => C >> channels => 1-31 >> schannel => >> firstcic => 33 >> enabled => yes >> >> [link-p11] >> linkset => C >> channels => 2-31 >> schannel => 1@box1:50001 >> firstcic => 97 >> sls => 1 >> stp => 3080 >> echocancel => no >> enabled => yes >> >> [link-p12] >> linkset => C >> channels => 1-31 >> schannel => >> firstcic => 161 >> enabled => yes >> >> [link-p13] >> linkset => A >> channels => 2-31 >> schannel => 1@box2:50003 >> firstcic => 1 >> sls => 0 >> stp => 3050 >> echocancel => no >> enabled => yes >> >> [link-p14] >> linkset => A >> channels => 1-31 >> schannel => >> firstcic => 65 >> enabled => yes >> >> [link-p15] >> linkset => A >> channels => 2-31 >> schannel => 1@box2:50004 >> firstcic => 33 >> sls => 0 >> stp => 3080 >> echocancel => no >> enabled => yes >> >> [link-p16] >> linkset => A >> channels => 1-31 >> schannel => >> firstcic => 97 >> enabled => yes >> >> [host-box1] >> enabled => yes >> opc => 10001 >> dpc => A:950,B:970,C:1000 >> links => p5:5,p6:6,p7:7,p8:8,p9:9,p10:10,p11:11,p12:12 >> if-1 => 192.168.1.199 >> >> [host-box2] >> enabled => yes >> opc => 10001 >> dpc => A:950,B:970,C:1000 >> links => p1:1,p2:2,p3:3,p4:4,p13:9,p14:6,p15:7,p16:8 >> if-1 => 192.168.1.200 >> >> Regards, >> Daniel Fernandes >> >> >> >> >> On 12/22/2016 07:31 PM, Kashif Ali wrote: >> >> send full ss7.conf >> >> On Wed, Dec 21, 2016 at 9:37 PM, Daniel Fernandes <d...@t2change.com> >> wrote: >> >>> Hi, >>> >>> >>> I’m configuring 2 asterisk boxes with 16 E1 using chan_ss7 and mtp3d for >>> clustering. >>> >>> My Versions: >>> >>> * Asterisk 11.18.0 >>> * Dahdi 2.10.2 >>> * Chan_ss7 2.4.4 from svn >>> >>> my ss7.conf file is the same in both boxes, and my schannel is >>> configured as: >>> schannel => 1@box1:50001 >>> >>> Checking mtp3d and asterisk logs, i found some strange messages: >>> >>> on asterisk logs: >>> WARNING[11594] cluster.c: No way to send packet to cluster, >>> link='p1', reqtype=2 >>> >>> on mtp3d logs: >>> mtp3io.c:162 mtp3_reply Send packet to 0.0.0.0:16640 >>> >>> since i'm not defined port 16640 anywhere, why mtp3d tries to reply to >>> any host on that port? >>> >>> can anyone give me some help to understand what am i doing wrong? >>> >>> thanks in advance, >>> Daniel >>> >>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-ss7 mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>> >> >> >> >> >> -- >> Daniel Fernandes >> System Administrator/Developer >> >> Time 2 Change >> Rua Consiglieri Pedroso nº123 >> Parque da Iberfar - Edifício H >> Queluz de Baixo >> 2730-056 Barcarena >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> > >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7
