Hi,
Asterisk (with libss7) is a signaling end-point, so you can't have two
point-codes - you need an STP (which Asterisk is not) between the two
boxes in order to separate the two signaling channels.
However you do not need two point-codes for this setup, but simply to
define two groups of channels ... from the example in my previous email,
change the linkset definitions to:
linkset=1
networkindicator=national
group=1
context=From_Span1
pointcode=1
defaultdpc=2
adjpointcode=2
cicbeginswith=1
channel => 1-15
group=2
context=From_Span2
cicbeginswith=17
channel => 17-31
sigchan=16
#include ss7.timers
linkset=2
networkindicator=national
group=3
context=From_Span3
pointcode=2
defaultdpc=1
adjpointcode=1
cicbeginswith=1
channel => 32-46
group=4
context=From_Span4
cicbeginswith=17
channel => 48-62
sigchan=47
#include ss7.timers
Now you have 4 groups on the same 2 linksets, which is equal of having
two separate linksets on the same signalling link.
On 2016-03-21 07:40, Mehdi Shirazi wrote:
Hi
I connected 2 asterisk server with libss7 together to simulate real
scenario.
There is one signaling link between .
Asterisk one has one opc11 but Asterisk two have two opc2_1 and opc2_2.
There is 2 spans between , and I want to first spans use opc2_1 and
second span use opc2_2.
For setting Asterisk one there is no problem , in same linkset I can
add new defaultdpc=3
and new channels and new CICs. but in second server how I can add CICs
,here I should separate
add CICs based on pointcode (opc2_1 and opc2_2) but it seems one link
set just accept one point code.
If I want to add linkset with new pointcode(opc) with same signaling
channel it is not possible.
how I can have one signaling link but multiple originate point code in
different channel groups ?
Regards
M.Shirazi
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
