Hi,
you are missing some definitions (networkindicator, ss7_called_nai,
ss7_calling_nai, ss7_*prefix) for the linksets and also to use mtp3/isup
timers (highly recommended) they should be explicitly defined
On 2016-03-17 10:15, Mehdi Shirazi wrote:
Hi
This is my system.conf :
dynamic=loc,1:0,31,0
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
dynamic=loc,1:1,31,0
bchan=32-46,48-62
dchan=47
echocanceller=mg2,32-46,48-62
and this is my chan_dahdi.conf:
[channels]
signalling = ss7
ss7type = itu
group = 1
linkset = 1
context = one
slc=0
pointcode = 1111
adjpointcode = 2222
defaultdpc = 2222
cicbeginswith = 1
channel=1-15
sigchan = 16
group=2
linkset = 2
context = two
slc=0 ; same slc=0 because of loop back
pointcode = 2222
adjpointcode=1111
defaultdpc=1111
cicbeginswitch=1
channel=32-46
sigchan = 47
please tell me what is wrong in this configuration?
Regards
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
