I've moved the f-link to the last channel (48), but otherwise yes, it looks like my other SS7 links and trunk groups. When I query the circuit range, I get a message on Asterisk saying something about a message on non-equipped CICs (CQM I think). I'll get more details in a little bit (on the iPad now, not at my laptop).
When I run ss7 unblock cic x xx I don't see any debug messages that would indicate Asterisk is sending anything. Are you on 1.6? On Friday, April 30, 2010, Paul Timmins <p...@timmins.net> wrote: > I know it works fine on 6.1 (but I think I had it working on 5.0 too?) > > I assume you have the trunk group configured like this: > > TRUNKNAME > +-- Trunk-1-X-X-X (when you click on this, you see CIC 26) > +-- Trunk-2-X-X-X > (etc) > +-- Trunk-23-X-X-X (When you click on this, you see CIC 48) > > Also, when you go to ISUP in open manager and click on the point code, > you see the range of 00026 through 00048 on the right pane. > > Can you select all of those, right click and choose "Query Circuit > Range" and let me know what that says? > > -Paul > > Bryan Scott wrote: >> Great. Patch seems to work on the Asterisk side. But Asterisk (and the >> switch) complain if the Taqua has anything but SLC 0. If I use SLC 0 on the >> T7000 the link comes up, alarms clear, but the CIC's are still unconfigured. >> >> I'm *this* close to using simple PRI circuits. >> >> And Paul, the T7000 is on 6.0.0p20. I still need to do the isupMsgTrace >> that you mentioned. This is on an LTC card. >> >> -- Bryan >> >> >> >> >> On Fri, Apr 30, 2010 at 7:12 PM, Nahuel Greco <ngr...@gmail.com> wrote: >> >>> Here you have a patch attached to set the link SLC using an "slc" >>> directive in chan_dahdi.conf. Try it and tell me if works. >>> >>> Saludos, >>> Nahuel Greco. >>> >>> >>> >>> On Fri, Apr 30, 2010 at 7:01 PM, Bryan Scott <sirbr...@gmail.com> wrote: >>> >>>>>>> Set your SS7 trunk to SLC 1. I couldn't make it work >>>>>>> on SLC 0. No idea why. >>>>>>> >>>>>>> >>>>>> The Taqua is 1 too? Regardless of Asterisk's setting, it shows the SLC >>>>>> 0. Setting the Taqua to 1 causes the F-Link to go down and Asterisk >>>>>> complains. >>>>>> >>>>>> >>>>> Yes. Both the taqua and the asterisk are set to SLC=1 >>>>> >>>>> >>>> It looks like Asterisk pays no attention to the "slc" setting in >>>> chan_dahdi.conf, but instead libss7 (in ss7.c) automagically calculates >>>> the Signaling Link Code based on how many are linksets have been defined: >>>> >>>> >>>> /* ****************** */ >>>> // looks like we create a new mtp2 link and autoincrement the SLC counter >>>> >>>> m = mtp2_new(fd, ss7->switchtype); >>>> >>>> if (!m) >>>> return -1; >>>> >>>> m->slc = ss7->numlinks; >>>> ss7->numlinks += 1; >>>> m->master = ss7; >>>> if (zapmtp2) >>>> m->flags |= MTP2_FLAG_ZAPMTP2; >>>> >>>> ss7->links[ss7->numlinks - 1] = m; >>>> >>>> /* ****************** */ >>>> >>>> So changed it to add one (m->slc = ss7->numlinks + 1) and I'm getting MTP2 >>>> link issues: >>>> >>>> [Apr 30 16:01:04] WARNING[19051]: chan_dahdi.c:11509 ss7_linkset: MTP2 >>>> link down (SLC 1) >>>> MTP2 link up (SLC 1) >>>> [Apr 30 16:01:06] WARNING[19051]: chan_dahdi.c:11509 ss7_linkset: MTP2 >>>> link down (SLC 1) >>>> MTP2 link up (SLC 1) >>>> [Apr 30 16:01:09] WARNING[19051]: chan_dahdi.c:11509 ss7_linkset: MTP2 >>>> link down (SLC 1) >>>> >>>> >>>> >>>> >>>> -- >>>> _____________________________________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> asterisk-ss7 mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>> >>>> >> <libss7.configure_slc.patch>-- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> >> >> > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7
