Hi,
I did not find a way to do that in chan_ss7.
However you can use the hunting_policy in the linkset definition to try achieve
that in a way
you can use
hunting_policy => seq_lth
to use the first E1 to send calls
if you want to use the second E1 then use
hunting_policy => seq_htl
This will only ensure that the first 30 outbound calls go to the E1 of your
choice.
Of course you can set a global counter that you increment as the calls
are coming in and decrement on hangup and then check to make sure that only 30
calls are sent. This will ensure that only 1 E1 is used for oubound.
Exmaple to use the first E1:
in ss7.conf use
hunting_policy => seq_lth
in the linkset definition
exten => _X.,1,SetGlobalVar(CALLCOUNTER=${MATH(${CALLCOUNTER}+1,int)})
exten => _X.,2,GoToIf($[${CALLCOUNTER} > 30] ? 3:4)
exten => _X.,3,Dial(SS7/MSC1/00${EXTEN}|60)
exten => _X.,4,Hangup()
exten => h,1,SetGlobalVar(CALLCOUNTER=${MATH(${CALLCOUNTER}-1,int)})
Regrads,
Antoine Megalla.
________________________________
From: aka <akabl...@gmail.com>
To: asterisk-ss7@lists.digium.com
Sent: Tuesday, May 26, 2009 12:57:30 PM
Subject: [asterisk-ss7] send call via define cic range
Hi
i am using chan_ss7 1.1 to connect ss7 & asterisk.in my configuration there has
a two links(E1 s) to connect asterisk ss7.is there has any way to handle
outsides calls in link wise.i try to configure asterisk this way but no luck
for this.(SS7/link1/$OUTNUM)
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
