hello,
i have some problems with ss7 interconnect , with EWSD
first, when i do outbound call to concrete channel , call is made, and
it works no ok
exten => _9.,1,Dial(DAHDI/6/${EXTEN:1})
exten => _9.,n,Hangup
but if i dial without channel id, i get an error
exten => _8.,1,Dial(DAHDI/${EXTEN:1})
exten => _8.,n,Hangup
-- Executing [30432661...@default:1] Dial("SIP/0485500002-b7da93c8",
"DAHDI/0432661123") in new stack
[May 19 15:04:27] WARNING[15577]: app_dial.c:1715 dial_exec_full: Unable
to create channel of type 'DAHDI' (cause 0 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
so how asterisk choose, which channel to use, problem may be with my
configuration, when my signaling is on channel 1, and asterisk is trying
to make a call on this channel
can i explicitly say to asterisk to jump first channel ? , actually it
should start with 3rd, because of lower Point Code than Adj. Point Code
(cicbeginswith = 2 in my config)
my second problem is with dial-in from ss7 to asterisk
my dialplan
[ss7]
exten => _!,1,Answer
exten => _!,n,Wait(1)
exten => _!,n,Dial(SIP/0485500002)
exten => _!,n,Hangup(34)
when iam not call with overlap it works good, with overlap dialing,
asterisk send Answer immediately , and this is a problem
i tried
exten => _4855XXXXX.,1,Answer
exten => _4855XXXXX.,n,Wait(1)
exten => _4855XXXXX.,n,Dial(SIP/0485500002)
exten => _4855XXXXX.,n,Hangup(34)
but i allways get unallocated number
this also works, but with overlap i get answer after four number and
therefor i can't pass the tests
exten => _2855.,1,Answer
exten => _2855.,n,Wait(1)
exten => _2855.,n,Dial(SIP/0485500002)
exten => _2855.,n,Hangup(34)
thanks for any help
regards
peter
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
