signalling = ss7
ss7type = itu
linkset = 1
context = Company1_link1
language = en
rxgain=0.0
txgain=0.0
pointcode = 27
adjpointcode = 18
defaultdpc = 14
cicbeginswith = 1
switchtype = national
networkindicator = national_spare
group = 0
sigchan = 47
channel = 32-46
channel = 48-62
linkset = 2
context = Company1_link2 ;backup
language = en
rxgain=0.0
txgain= 0.0
pointcode = 27
adjpointcode = 38
defaultdpc = 13
cicbeginswith = 1
switchtype = national
networkindicator = national_spare
group = 1
sigchan = 109
channel = 94-108
channel = 110-124
linkset = 3
context = Company2_link1
language = en
rxgain=0.0
txgain=0.0
pointcode = 26
adjpointcode = 18
defaultdpc = 14
cicbeginswith = 1
switchtype = national
networkindicator = national_spare
group = 2
sigchan = 16
channel = 1-15
channel = 17-31
linkset = 4
context = Company2_link2 ; backup
language = en
rxgain=0.0
txgain=0.0
pointcode = 26
adjpointcode = 38
defaultdpc = 13
cicbeginswith = 1
switchtype = national
networkindicator = national_spare
group = 3
sigchan = 78
channel = 63-77
channel = 79-93
These are two companies connecting to the same PTT , each has Softswitch to receive the calls from the Asterisk/Libss7 switch . The links for Company1 are OK .
On 10/11/06, Matthew Fredrickson <[EMAIL PROTECTED]> wrote:
Can you post your zapata.conf (and zaptel.conf)?
Matthew Fredrickson
On Oct 10, 2006, at 8:21 PM, Tawanda Charles Bwanya wrote:
> Yes i set it up a a new linkset . I cant get much debuging to close in.
> The link does say MTP2 UP .
>
> T.C
>
> On 10/10/06, Matthew Fredrickson < [EMAIL PROTECTED]> wrote:
>> On Oct 10, 2006, at 11:54 AM, Tawanda Charles Bwanya wrote:
>>
>> > Anyone managed to get asterisk/libss7 working with multiple OPCs .
>> Is
>> > it possible .
>> >
>> > This is what i'm getting from the PTT about the 2nd link with diff
>> OPC
>> > .
>> >
>> > "I can't see your point code on my side. I get the error "DPC
>> > unavailable". For this reason we get the speech trunk status of NSYN
>> > (Not accessible Synchro). "
>>
>> Did you setup the second point code as another linkset in zapata.conf?
>> If you do that, you can specify another "pointcode=" line for your
>> other linkset.
>>
>> Matthew Fredrickson
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
Tawanda
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7
