On Sep 18, 2006, at 10:44 AM, Anton wrote:
And more
What I do send over SS7
*CLI> --- SS7 Up ---
-- Resetting CICs 1 to 30
-- Executing [EMAIL PROTECTED]:1]
Dial("SIP/111-081de268", "ZAP/r3/60") in new stack
-- Called r3/60
-- Zap/1-1 is proceeding passing it to SIP/111-081de268
-- Zap/1-1 answered SIP/111-081de26
and somehow I do receive on the other end an extra "0"
Ok, this is a bug I think I introduced this last week while I was
working on ANSI support. I'll see if I can reproduce it today and put
the fix in svn.
--- SS7 Up ---
-- Resetting CICs 1 to 30
[Sep 18 20:38:36] DEBUG[29244]: chan_zap.c:8339 ss7_linkset:
Got Reset for CICs 1 to 30: Acknowledging
[Sep 18 20:38:36] DEBUG[29244]: chan_zap.c:8344 ss7_linkset:
Got GRA from CIC 1 to 30.
[Sep 18 20:39:05] DEBUG[29244]: chan_zap.c:8348 ss7_linkset:
Got IAM for CIC 1 and number 600
also I'm still very very confuzed regarding GRA - it should
not send Group Reset for whole group - since there is a
signalling timeslot in between! (16)
This is probably because of how you configured your CICs. Please post
your zaptel.conf and zapata.conf. I think I have an idea for what you
did wrong.
Matthew Fredrickson
and still - no audio while it's over chan_ss7 - libss7
regards
anton.
On 18 September 2006 18:05, Anton wrote:
Got debug - was not cofigured logger.conf properly.
[Sep 18 18:02:08] DEBUG[6238]: chan_zap.c:8339
ss7_linkset: Got Reset for CICs 1 to 15: Acknowledging
[Sep 18 18:02:08] DEBUG[6238]: chan_zap.c:8339
ss7_linkset: Got Reset for CICs 17 to 31: Acknowledging
On 18 September 2006 17:26, Anton wrote:
Just compiled the libss7 and interlinked it with
chan_ss7 for testing. Following issues arised:
Most major - No audio. Channel occupied and so on - but
I hear nothing.
Unable to properly assign a linkset with single
signalling channel (say we have only schannel 16 on
first span and no signalling channel on the second
span) seems libss7 somehow not properly counting cic's?
The following should not happen since 16 is setup as
schan
Sep 18 17:06:21 NOTICE[17607]: chan_ss7.c:2090
handle_GRS_send_hwblock: Got GROUP RESET message,
opc=0xd06, dpc=0xd06, sls=0x0, cic=1, range=29.
Sep 18 17:06:21 NOTICE[17607]: chan_ss7.c:2121
handle_GRS_send_hwblock: Got GRS concerning unequipped
CIC 16, discarding.
Sep 18 17:06:21 WARNING[17607]: chan_ss7.c:3594
monitor_main: MTP is now UP on link 'l1'.
Sep 18 17:06:21 WARNING[17607]: chan_ss7.c:3601
monitor_main: MTP is now INSERVICE for linkset 'test1'.
lib ss7 lacking verbosity in comparision with chan_ss7
wich provides quite good feedback, showing what is
happening.
very few command options. Not found how to see the
status of the ss7 link. How is it alligned, what is the
sigchannel, which cics are occupied is possible to find
only by zap show channels - which is not enough at all.
No current state of the CIC
Regards,
Anton.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
