Hi
I just purchased a NanoPI R5S as it seems supported by OpenBSD but I
have some issues getting it installed.
After reading the arm maillist archive it seems like some has gotten it
running and I found https://personalbsd.org/download/UEFI-RK356x/ where
a ready made image for installation was done.
Steps I have done:
-Download and flash
https://personalbsd.org/download/UEFI-RK356x/NANOPI-R5S_EFI.img to a cf
-Put the cf in my NanoPI R5S and power on
-Enter set tty fb0 at boot prompt and boot it up
-The normal OpenBSD install procedure starts using HDMI connected screen
and USB keyboard and everything looks fine. So I assume OpenBSD is
installed at the internal emmc drive.
-When told, I remove the cf and reboot. The screen is totally blank and
nothing seems to happen.
There is a UART but it seems it needs soldering to get a serial console
so I would prefer to avoid that.
I would be very happy if anyone could advise me how to get installation
on the internal disk working.
Thanks
Peter Andersson
