Hi, The board became officially supported by mainline linux with the recently released v6.11. U-Boot supporte expected in 2024.10, but the master branch already supports it. This could be a great moment to add it to the list of the ARM64 boards supported by OpenBSD.
Best regards, -- ext MIZSEI Zoltán írta 2024. aug.. 23, P-n 19:38 órakor: > Hi, > > I am wondering why the rkdrm driver emmits this message on rk3566: > > >> rkdrm0: no display interface ports configured > > And if there is anything one can try or do to enable support / help to > make it supported. > > Regards, > --ext > > --Z-- > 2024. aug. 15. 21:24:04 Mizsei Zoltán <zmiz...@extrowerk.com>: > >> Hi! >> >> Mainline U-Boot support is expected in U-Boot 2024.10 (see patches here: >> https://lore.kernel.org/u-boot/20240802221231.2629416-6-jo...@kwiboo.se/ ), >> already available in >> https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/tags/u-boot-rockchip-20240812 >> >> >> Linux support expected in 6.11 : >> https://lore.kernel.org/linux-devicetree/171684956150.1783037.13006696175237396238.b4...@sntech.de/ >> >> >> Board description: >> The Radxa ZERO 3W/3E is an ultra-small, high-performance single board >> computer based on the Rockchip RK3566, with a compact form factor and >> rich interfaces. >> >> Docs: https://docs.radxa.com/en/zero/zero3 >> Keep in mind: the board is built with 2 different wlan chip, the earlier >> models have AP6212 but the later models sports AIC8800. >> >> EDK2 available here: https://github.com/jaredmcneill/quartz64_uefi/ >> >> Test results: booting using EDK2 results working X11, but the eMMC will not >> work, however with U-Boot eMMC supported, but starting Xorg fails. Isn't it >> supposed to work using rkdrm? >> >> Bootlog using E-Boot: >> >> BSD.RD: >> >> U-Boot 2024.10-rc2 (Aug 15 2024 - 20:05:16 +0200) >> >> >> >> Model: Radxa ZERO 3W >> DRAM: 8 GiB (effective 7.7 GiB) >> PMIC: RK817 (on=0x40, off=0x00) >> Core: 299 devices, 28 uclasses, devicetree: separate >> MMC: mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0 >> Loading Environment from nowhere... OK >> In: serial@fe660000 >> Out: serial@fe660000 >> Err: serial@fe660000 >> Model: Radxa ZERO 3W >> Net: No ethernet found. >> Hit any key to stop autoboot: 0 >> Scanning for bootflows in all bootdevs >> Seq Method State Uclass Part Name Filename >> --- ----------- ------ -------- ---- ------------------------ >> ---------------- >> Scanning global bootmeth 'efi_mgr': >> Card did not respond to voltage select! : -110 >> No EFI system partition >> No EFI system partition >> Failed to persist EFI variables >> No EFI system partition >> Failed to persist EFI variables >> No EFI system partition >> Failed to persist EFI variables >> No EFI system partition >> Failed to persist EFI variables >> No EFI system partition >> Failed to persist EFI variables >> 0 efi_mgr ready (none) 0 <NULL> >> ** Booting bootflow '<NULL>' with efi_mgr >> Booting: mmc 1 >> disks: sd0* sd1 >>>> OpenBSD/arm64 BOOTAA64 1.20 >> boot> >> cannot open sd0a:/etc/random.seed: No such file or directory >> booting sd0a:/bsd: 3054228+1248332+12713448+634064 >> [271894+91+707976+290174]=0x13f0f38 >> Copyright (c) 1982, 1986, 1989, 1991, 1993 >> The Regents of the University of California. All rights reserved. >> Copyright (c) 1995-2024 OpenBSD. All rights reserved. >> https://www.OpenBSD.org >> >> OpenBSD 7.6-beta (RAMDISK) #146: Tue Aug 13 15:23:31 MDT 2024 >> [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/RAMDISK >> real mem = 8317743104 (7932MB) >> avail mem = 7976288256 (7606MB) >> random: good seed from bootblocks >> mainbus0 at root: Radxa ZERO 3W >> psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND >> efi0 at mainbus0: UEFI 2.10 >> efi0: Das U-Boot rev 0x20241000 >> smbios0 at efi0: SMBIOS 3.7.0 >> smbios0: vendor U-Boot version "2024.10-rc2" date 10/01/2024 >> smbios0: radxa Radxa ZERO 3W >> cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0 >> cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache >> cpu0: 512KB 64b/line 16-way L2 cache >> cpu0: >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,AdvSIMD+HP,FP+HP,SSBS >> >> scmi0 at mainbus0: SCMI 2.0 >> agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4: "interrupt-controller" >> syscon0 at mainbus0: "syscon" >> rkiovd0 at syscon0 >> syscon1 at mainbus0: "syscon" >> syscon2 at mainbus0: "syscon" >> syscon3 at mainbus0: "syscon" >> syscon4 at mainbus0: "syscon" >> syscon5 at mainbus0: "syscon" >> syscon6 at mainbus0: "syscon" >> rkclock0 at mainbus0: PMUCRU >> rkclock1 at mainbus0: CRU >> syscon7 at mainbus0: "power-management" >> "power-controller" at syscon7 not configured >> syscon8 at mainbus0: "qos" >> syscon9 at mainbus0: "qos" >> syscon10 at mainbus0: "qos" >> syscon11 at mainbus0: "qos" >> syscon12 at mainbus0: "qos" >> syscon13 at mainbus0: "qos" >> syscon14 at mainbus0: "qos" >> syscon15 at mainbus0: "qos" >> syscon16 at mainbus0: "qos" >> syscon17 at mainbus0: "qos" >> syscon18 at mainbus0: "qos" >> syscon19 at mainbus0: "qos" >> syscon20 at mainbus0: "qos" >> syscon21 at mainbus0: "qos" >> syscon22 at mainbus0: "qos" >> syscon23 at mainbus0: "qos" >> syscon24 at mainbus0: "qos" >> syscon25 at mainbus0: "qos" >> syscon26 at mainbus0: "qos" >> syscon27 at mainbus0: "qos" >> syscon28 at mainbus0: "qos" >> syscon29 at mainbus0: "qos" >> syscon30 at mainbus0: "qos" >> syscon31 at mainbus0: "qos" >> rkcomphy0 at mainbus0 >> rkusbphy0 at mainbus0: phy 0 >> rkpinctrl0 at mainbus0: "pinctrl" >> rkgpio0 at rkpinctrl0 >> rkgpio1 at rkpinctrl0 >> rkgpio2 at rkpinctrl0 >> rkgpio3 at rkpinctrl0 >> rkgpio4 at rkpinctrl0 >> "fit-images" at mainbus0 not configured >> "l3-cache" at mainbus0 not configured >> "opp-table-0" at mainbus0 not configured >> "display-subsystem" at mainbus0 not configured >> "firmware" at mainbus0 not configured >> "opp-table-1" at mainbus0 not configured >> "hdmi-sound" at mainbus0 not configured >> "pmu" at mainbus0 not configured >> agtimer0 at mainbus0: 24000 kHz >> "xin24m" at mainbus0 not configured >> "xin32k" at mainbus0 not configured >> "sram" at mainbus0 not configured >> xhci0 at mainbus0, xHCI 1.10 >> usb0 at xhci0: USB revision 3.0 >> uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev >> 3.00/1.00 addr 1 >> xhci1 at mainbus0, xHCI 1.10 >> usb1 at xhci1: USB revision 3.0 >> uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev >> 3.00/1.00 addr 1 >> rkiic0 at mainbus0 >> iic0 at rkiic0 >> rkpmic0 at iic0 addr 0x20: RK817 >> "rockchip,rk8600" at iic0 addr 0x40 not configured >> "gpu" at mainbus0 not configured >> "video-codec" at mainbus0 not configured >> "iommu" at mainbus0 not configured >> "rga" at mainbus0 not configured >> "video-codec" at mainbus0 not configured >> "iommu" at mainbus0 not configured >> "vop" at mainbus0 not configured >> "iommu" at mainbus0 not configured >> "hdmi" at mainbus0 not configured >> "dfi" at mainbus0 not configured >> dwmmc0 at mainbus0: 50 MHz base clock >> sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma >> dwmmc1 at mainbus0: 50 MHz base clock >> sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma >> dwmshc0 at mainbus0 >> dwmshc0: SDHC 4.20, 200 MHz base clock >> sdmmc2 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma >> "i2s" at mainbus0 not configured >> "dma-controller" at mainbus0 not configured >> "dma-controller" at mainbus0 not configured >> "watchdog" at mainbus0 not configured >> com0 at mainbus0: dw16550, 64 byte fifo >> com1 at mainbus0: dw16550, 64 byte fifo >> com1: console >> "tsadc" at mainbus0 not configured >> "saradc" at mainbus0 not configured >> "hdmi-con" at mainbus0 not configured >> "leds" at mainbus0 not configured >> "regulator-1v8-vcc" at mainbus0 not configured >> "regulator-1v8-vcca" at mainbus0 not configured >> "regulator-1v8-vcca-image" at mainbus0 not configured >> "regulator-3v3-vcc" at mainbus0 not configured >> "regulator-5v0-vcc-sys" at mainbus0 not configured >> "sdio-pwrseq" at mainbus0 not configured >> "binman" at mainbus0 not configured >> "dmc" at mainbus0 not configured >> rkrng0 at mainbus0: ver 2 >> "nvmem" at mainbus0 not configured >> scsibus0 at sdmmc0: 2 targets, initiator 0 >> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, NCard, 0010> removable >> sd0: 14910MB, 512 bytes/sector, 30535680 sectors >> manufacturer 0xc8a1, product 0x0082 at sdmmc1 function 1 not configured >> manufacturer 0xc8a1, product 0x0082 at sdmmc1 function 2 not configured >> scsibus1 at sdmmc2: 2 targets, initiator 0 >> sd1 at scsibus1 targ 1 lun 0: <Samsung, CUTB42, 0000> >> sd1: 59640MB, 512 bytes/sector, 122142720 sectors >> softraid0 at root >> scsibus2 at softraid0: 256 targets >> root on rd0a swap on rd0b dump on rd0b >> WARNING: bad clock chip time >> WARNING: CHECK AND RESET THE DATE! >> cpu0: regulator not implemented >> erase ^?, werase ^W, kill ^U, intr ^C, status ^T >> >> Welcome to the OpenBSD/arm64 7.6 installation program. >> (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? i >> At any prompt except password prompts you can escape to a shell by >> typing '!'. Default answers are shown in []'s and are selected by >> pressing RETURN. You can exit this program at any time by pressing >> Control-C, but this can leave your system in an inconsistent state. >> >> Terminal type? [vt220] >> System hostname? (short form, e.g. 'foo') zero >> >> DNS domain name? (e.g. 'example.com') [my.domain] >> DNS nameservers? (IP address list or 'none') [none] >> >> Password for root account? (will not echo) >> Password for root account? (again) >> Start sshd(8) by default? [yes] >> Setup a user? (enter a lower-case loginname, or 'no') [no] szilard >> Full name for user szilard? [szilard] >> Password for user szilard? (will not echo) >> Password for user szilard? (again) >> WARNING: root is targeted by password guessing attacks, pubkeys are safer. >> Allow root ssh login? (yes, no, prohibit-password) [no] no >> >> Available disks are: sd0 sd1. >> Which disk is the root disk? ('?' for details) [sd0] ? >> sd0: SD/MMC, NCard, 0010 (14.6G) >> sd1: Samsung, CUTB42, 0000 (58.2G) >> Available disks are: sd0 sd1. >> Which disk is the root disk? ('?' for details) [sd0] sd1 >> Encrypt the root disk with a (p)assphrase or (k)eydisk? [no] no >> Disk: sd1 Usable LBA: 16 to 122142704 [122142720 Sectors] >> #: type [ start: size ] >> ------------------------------------------------------------------------ >> 0: Microsoft basic data [ 64: 32768 ] >> 1: NetBSD [ 32832: 33554432 ] >> 2: 49f48d32-b10e-11dc-b99b-0019d1879648 [ 33587264: 16777216 ] >> 3: NetBSD [ 50364480: 67108864 ] >> Use (W)hole disk or (E)dit the GPT? [whole] >> Creating a msdos partition and an OpenBSD partition for rest of sd1...done. >> The auto-allocated layout for sd1 is: >> # size offset fstype [fsize bsize cpg] >> a: 1024.0M 32832 4.2BSD 2048 16384 1 # / >> b: 4889.4M 2129984 swap >> c: 59640.0M 0 unused >> d: 3967.5M 12143488 4.2BSD 2048 16384 1 # /tmp >> e: 6332.2M 20268928 4.2BSD 2048 16384 1 # /var >> f: 6309.4M 33237280 4.2BSD 2048 16384 1 # /usr >> g: 1024.0M 46158912 4.2BSD 2048 16384 1 # >> /usr/X11R6 >> h: 8238.1M 48256064 4.2BSD 2048 16384 1 # >> /usr/local >> i: 16.0M 64 MSDOS >> j: 3009.9M 65127648 4.2BSD 2048 16384 1 # /usr/src >> k: 6144.0M 71291872 4.2BSD 2048 16384 1 # /usr/obj >> l: 18685.5M 83874784 4.2BSD 2048 16384 1 # /home >> Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] >> /dev/rsd1a: 1024.0MB in 2097152 sectors of 512 bytes >> 6 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each >> /dev/rsd1l: 18685.5MB in 38267872 sectors of 512 bytes >> 93 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each >> /dev/rsd1d: 3967.5MB in 8125440 sectors of 512 bytes >> 20 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each >> /dev/rsd1f: 6309.4MB in 12921632 sectors of 512 bytes >> 32 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each >> /dev/rsd1g: 1024.0MB in 2097152 sectors of 512 bytes >> 6 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each >> /dev/rsd1h: 8238.1MB in 16871584 sectors of 512 bytes >> 41 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each >> /dev/rsd1k: 6144.0MB in 12582912 sectors of 512 bytes >> 31 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each >> /dev/rsd1j: 3009.9MB in 6164224 sectors of 512 bytes >> 15 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each >> /dev/rsd1e: 6332.2MB in 12968352 sectors of 512 bytes >> 32 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each >> Available disks are: sd0. >> Which disk do you wish to initialize? (or 'done') [done] >> /dev/sd1a (0d52d29dff846554.a) on /mnt type ffs (rw, asynchronous, local) >> /dev/sd1l (0d52d29dff846554.l) on /mnt/home type ffs (rw, asynchronous, >> local, nodev, nosuid) >> /dev/sd1d (0d52d29dff846554.d) on /mnt/tmp type ffs (rw, asynchronous, >> local, nodev, nosuid) >> /dev/sd1f (0d52d29dff846554.f) on /mnt/usr type ffs (rw, asynchronous, >> local, nodev) >> /dev/sd1g (0d52d29dff846554.g) on /mnt/usr/X11R6 type ffs (rw, asynchronous, >> local, nodev) >> /dev/sd1h (0d52d29dff846554.h) on /mnt/usr/local type ffs (rw, asynchronous, >> local, nodev) >> /dev/sd1k (0d52d29dff846554.k) on /mnt/usr/obj type ffs (rw, asynchronous, >> local, nodev, nosuid) >> /dev/sd1j (0d52d29dff846554.j) on /mnt/usr/src type ffs (rw, asynchronous, >> local, nodev, nosuid) >> /dev/sd1e (0d52d29dff846554.e) on /mnt/var type ffs (rw, asynchronous, >> local, nodev, nosuid) >> >> Let's install the sets! >> Location of sets? (disk http nfs or 'done') [http] disk >> Is the disk partition already mounted? [no] >> Available disks are: sd0 sd1. >> Which disk contains the install media? (or 'done') [sd0] sd0 >> a: 1187232 49152 4.2BSD 2048 16384 16142 >> i: 16384 32768 MSDOS >> Available sd0 partitions are: a i. >> Which sd0 partition has the install sets? (or 'done') [a] a >> Pathname to the sets? (or 'done') [7.6/arm64] >> >> Select sets by entering a set name, a file name pattern or 'all'. De-select >> sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'. >> [X] bsd [X] base76.tgz [X] game76.tgz [X] xfont76.tgz >> [X] bsd.mp [X] comp76.tgz [X] xbase76.tgz [X] xserv76.tgz >> [X] bsd.rd [X] man76.tgz [X] xshare76.tgz >> Set name(s)? (or 'abort' or 'done') [done] >> Directory does not contain SHA256.sig. Continue without verification? [no] >> yes >> Installing bsd 100% |**************************| 17344 KB 00:01 >> >> Installing bsd.mp 100% |**************************| 17425 KB 00:01 >> >> Installing bsd.rd 100% |**************************| 18008 KB 00:01 >> >> Installing base76.tgz 100% |**************************| 306 MB 00:49 >> >> Extracting etc.tgz 100% |**************************| 264 KB 00:00 >> >> Installing comp76.tgz 100% |**************************| 78452 KB 00:22 >> >> Installing man76.tgz 100% |**************************| 8049 KB 00:04 >> >> Installing game76.tgz 100% |**************************| 2747 KB 00:00 >> >> Installing xbase76.tgz 100% |**************************| 52028 KB 00:13 >> >> Extracting xetc.tgz 100% |**************************| 8716 00:00 >> >> Installing xshare76.tgz 100% |**************************| 4552 KB 00:04 >> >> Installing xfont76.tgz 100% |**************************| 23023 KB 00:04 >> >> Installing xserv76.tgz 100% |**************************| 15605 KB 00:03 >> >> Installing BUILDINFO 100% |**************************| 54 00:00 >> >> Location of sets? (disk http nfs or 'done') [done] >> >> What timezone are you in? ('?' for list) [Canada/Mountain] Europe/Budapest >> Saving configuration files... done. >> Making all device nodes... done. >> Multiprocessor machine; using bsd.mp instead of bsd. >> fw_update: add none; update none >> Relinking to create unique kernel... done. >> >> CONGRATULATIONS! Your OpenBSD install has been successfully completed! >> >> When you login to your new system the first time, please read your mail >> using the 'mail' command. >> >> Exit to (S)hell, (H)alt or (R)eboot? [reboot] >> >> >> ------ reboot ------ >> >> U-Boot 2024.10-rc2 (Aug 15 2024 - 20:05:16 +0200) >> >> Model: Radxa ZERO 3W >> DRAM: 8 GiB (effective 7.7 GiB) >> PMIC: RK817 (on=0x40, off=0x00) >> Core: 299 devices, 28 uclasses, devicetree: separate >> MMC: mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0 >> Loading Environment from nowhere... OK >> In: serial@fe660000 >> Out: serial@fe660000 >> Err: serial@fe660000 >> Model: Radxa ZERO 3W >> Net: No ethernet found. >> Hit any key to stop autoboot: 0 >> Scanning for bootflows in all bootdevs >> Seq Method State Uclass Part Name Filename >> --- ----------- ------ -------- ---- ------------------------ >> ---------------- >> Scanning global bootmeth 'efi_mgr': >> Card did not respond to voltage select! : -110 >> 0 efi_mgr ready (none) 0 <NULL> >> ** Booting bootflow '<NULL>' with efi_mgr >> Booting: mmc 1 >> disks: sd0* sd1 >>>> OpenBSD/arm64 BOOTAA64 1.20 >> boot> boot sd1a:/bsd >> booting sd1a:/bsd: 11545200+2769512+301024+845320 >> [939119+91+1307304+809059]=0x8 >> [ using 3056352 bytes of bsd ELF symbol table ] >> Copyright (c) 1982, 1986, 1989, 1991, 1993 >> The Regents of the University of California. All rights reserved. >> Copyright (c) 1995-2024 OpenBSD. All rights reserved. >> https://www.OpenBSD.org >> >> OpenBSD 7.6-beta (GENERIC.MP) #152: Tue Aug 13 15:00:35 MDT 2024 >> [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP >> real mem = 8317743104 (7932MB) >> avail mem = 7976210432 (7606MB) >> random: good seed from bootblocks >> mainbus0 at root: Radxa ZERO 3W >> psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND >> efi0 at mainbus0: UEFI 2.10 >> efi0: Das U-Boot rev 0x20241000 >> smbios0 at efi0: SMBIOS 3.7.0 >> smbios0: vendor U-Boot version "2024.10-rc2" date 10/01/2024 >> smbios0: radxa Radxa ZERO 3W >> cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0 >> >> cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache >> >> cpu0: 512KB 64b/line 16-way L2 cache >> >> cpu0: >> DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPS >> cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0 >> >> cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache >> >> cpu1: 512KB 64b/line 16-way L2 cache >> >> cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0 >> >> cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache >> >> cpu2: 512KB 64b/line 16-way L2 cache >> >> cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0 >> >> cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache >> >> cpu3: 512KB 64b/line 16-way L2 cache >> >> scmi0 at mainbus0: SCMI 2.0 >> >> apm0 at mainbus0 >> >> agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2: >> "interrupt-c" >> syscon0 at mainbus0: "syscon" >> >> rkiovd0 at syscon0 >> >> syscon1 at mainbus0: "syscon" >> >> syscon2 at mainbus0: "syscon" >> >> syscon3 at mainbus0: "syscon" >> >> syscon4 at mainbus0: "syscon" >> >> syscon5 at mainbus0: "syscon" >> >> syscon6 at mainbus0: "syscon" >> >> rkclock0 at mainbus0: PMUCRU >> >> rkclock1 at mainbus0: CRU >> >> syscon7 at mainbus0: "power-management" >> >> "power-controller" at syscon7 not configured >> >> syscon8 at mainbus0: "qos" >> >> syscon9 at mainbus0: "qos" >> >> syscon10 at mainbus0: "qos" >> >> syscon11 at mainbus0: "qos" >> >> syscon12 at mainbus0: "qos" >> >> syscon13 at mainbus0: "qos" >> >> syscon14 at mainbus0: "qos" >> >> syscon15 at mainbus0: "qos" >> >> syscon16 at mainbus0: "qos" >> >> syscon17 at mainbus0: "qos" >> >> syscon18 at mainbus0: "qos" >> >> syscon19 at mainbus0: "qos" >> >> syscon20 at mainbus0: "qos" >> >> syscon21 at mainbus0: "qos" >> >> syscon22 at mainbus0: "qos" >> >> syscon23 at mainbus0: "qos" >> >> syscon24 at mainbus0: "qos" >> >> syscon25 at mainbus0: "qos" >> >> syscon26 at mainbus0: "qos" >> >> syscon27 at mainbus0: "qos" >> >> syscon28 at mainbus0: "qos" >> >> syscon29 at mainbus0: "qos" >> >> syscon30 at mainbus0: "qos" >> >> syscon31 at mainbus0: "qos" >> >> rkcomphy0 at mainbus0 >> >> rkusbphy0 at mainbus0: phy 0 >> >> rkpinctrl0 at mainbus0: "pinctrl" >> >> rkgpio0 at rkpinctrl0 >> >> rkgpio1 at rkpinctrl0 >> >> rkgpio2 at rkpinctrl0 >> >> rkgpio3 at rkpinctrl0 >> >> rkgpio4 at rkpinctrl0 >> >> "fit-images" at mainbus0 not configured >> >> "l3-cache" at mainbus0 not configured >> >> "opp-table-0" at mainbus0 not configured >> >> rkdrm0 at mainbus0 >> >> drm0 at rkdrm0 >> >> "firmware" at mainbus0 not configured >> >> "opp-table-1" at mainbus0 not configured >> >> simpleaudio0 at mainbus0 >> >> "pmu" at mainbus0 not configured >> >> agtimer0 at mainbus0: 24000 kHz >> >> "xin24m" at mainbus0 not configured >> >> "xin32k" at mainbus0 not configured >> >> "sram" at mainbus0 not configured >> >> xhci0 at mainbus0, xHCI 1.10 >> >> usb0 at xhci0: USB revision 3.0 >> >> uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev >> 3.00/1.001 >> xhci1 at mainbus0, xHCI 1.10 >> >> usb1 at xhci1: USB revision 3.0 >> >> uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev >> 3.00/1.001 >> rkiic0 at mainbus0 >> >> iic0 at rkiic0 >> >> rkpmic0 at iic0 addr 0x20: RK817 >> >> "rockchip,rk8600" at iic0 addr 0x40 not configured >> >> "gpu" at mainbus0 not configured >> >> "video-codec" at mainbus0 not configured >> >> "iommu" at mainbus0 not configured >> >> "rga" at mainbus0 not configured >> >> "video-codec" at mainbus0 not configured >> >> "iommu" at mainbus0 not configured >> >> "vop" at mainbus0 not configured >> >> "iommu" at mainbus0 not configured >> >> "hdmi" at mainbus0 not configured >> >> "dfi" at mainbus0 not configured >> >> dwmmc0 at mainbus0: 50 MHz base clock >> >> sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma >> >> dwmmc1 at mainbus0: 50 MHz base clock >> >> sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma >> >> dwmshc0 at mainbus0 >> >> dwmshc0: SDHC 4.20, 200 MHz base clock >> >> sdmmc2 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma >> >> "i2s" at mainbus0 not configured >> >> "dma-controller" at mainbus0 not configured >> >> "dma-controller" at mainbus0 not configured >> >> "watchdog" at mainbus0 not configured >> >> com0 at mainbus0: dw16550, 64 byte fifo >> >> com1 at mainbus0: dw16550, 64 byte fifo >> >> com1: console >> >> rktemp0 at mainbus0 >> >> "saradc" at mainbus0 not configured >> >> "hdmi-con" at mainbus0 not configured >> >> gpioleds0 at mainbus0: "heartbeat" >> >> "regulator-1v8-vcc" at mainbus0 not configured >> >> "regulator-1v8-vcca" at mainbus0 not configured >> >> "regulator-1v8-vcca-image" at mainbus0 not configured >> >> "regulator-3v3-vcc" at mainbus0 not configured >> >> "regulator-5v0-vcc-sys" at mainbus0 not configured >> >> "sdio-pwrseq" at mainbus0 not configured >> >> "binman" at mainbus0 not configured >> >> "dmc" at mainbus0 not configured >> >> rkrng0 at mainbus0: ver 2 >> >> "nvmem" at mainbus0 not configured >> >> scsibus0 at sdmmc0: 2 targets, initiator 0 >> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, NCard, 0010> removable >> sd0: 14910MB, 512 bytes/sector, 30535680 sectors >> scsibus1 at sdmmc2: 2 targets, initiator 0 >> sd1 at scsibus1 targ 1 lun 0: <Samsung, CUTB42, 0000> >> sd1: 59640MB, 512 bytes/sector, 122142720 sectors >> sdmmc1: can't enable card >> vscsi0 at root >> scsibus2 at vscsi0: 256 targets >> softraid0 at root >> scsibus3 at softraid0: 256 targets >> root on sd1a (0d52d29dff846554.a) swap on sd1b dump on sd1b >> cpu0: regulator not implemented >> rkdrm0: no display interface ports configured >> Automatic boot in progress: starting file system checks. >> /dev/sd1a (0d52d29dff846554.a): file system is clean; not checking >> /dev/sd1l (0d52d29dff846554.l): file system is clean; not checking >> /dev/sd1d (0d52d29dff846554.d): file system is clean; not checking >> /dev/sd1f (0d52d29dff846554.f): file system is clean; not checking >> /dev/sd1g (0d52d29dff846554.g): file system is clean; not checking >> /dev/sd1h (0d52d29dff846554.h): file system is clean; not checking >> /dev/sd1k (0d52d29dff846554.k): file system is clean; not checking >> /dev/sd1j (0d52d29dff846554.j): file system is clean; not checking >> /dev/sd1e (0d52d29dff846554.e): file system is clean; not checking >> pf enabled >> starting network >> reordering: ld.so libc libcrypto sshd sshd-session ssh-agent. >> openssl: generating isakmpd RSA keys... done. >> openssl: generating iked ECDSA keys... done. >> ssh-keygen: generating new host keys: RSA ECDSA ED25519 >> sshd: (ED25519) SHA256:6RTHh+5m0YEPFemPRbWxM15flworTbY6A0d3m7YH6c4 >> starting early daemons: syslogd pflogd ntpd. >> starting RPC daemons:. >> savecore: no core dump >> checking quotas: done. >> clearing /tmp >> kern.securelevel: 0 -> 1 >> creating runtime link editor directory cache. >> preserving editor files. >> starting network daemons: sshd smtpd sndiod. >> running rc.firsttime >> fw_update: add none; update none >> starting local daemons: cron. >> Tue Aug 13 23:42:17 CEST 2024 >> >> OpenBSD/arm64 (zero.my.domain) (console) >> >> login: root >> Password: >> OpenBSD 7.6-beta (GENERIC.MP) #152: Tue Aug 13 15:00:35 MDT 2024 >> >> Welcome to OpenBSD: The proactively secure Unix-like operating system. >> >> Please use the sendbug(1) utility to report bugs in the system. >> Before reporting a bug, please try to reproduce it with the latest >> version of the code. With bug reports, please try to ensure that >> enough information to reproduce the problem is enclosed, and if a >> known fix for it exists, include that as well. >> >> You have mail. >> zero# >> >> ------------------------------------------------------------ >> >> --Z-- -- --Z--
