Crystal Kolipe <kolip...@exoticsilicon.com> wrote:
> I don't have a suitable serial cable to hand to test booting a
> recent OpenBSD kernel on one of the Pinephones that's sculling
> around here, but I did test it at some point back in February
> or March without much success.
I got curious, other than the serial console no sign of life
from the phone.
U-Boot SPL 2021.07 (Oct 25 2021 - 23:03:18 +0200)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.5(debug):2.5
NOTICE: BL31: Built : 07:08:10, Sep 27 2021
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x408ddc0, model: Pine64 PinePhone (1.2)
INFO: ARM GICv2 driver initialized
INFO: Configuring SPC Controller
INFO: PMIC: Probing AXP803 on RSB
INFO: PMIC: dcdc1 voltage: 3.300V
INFO: PMIC: dcdc5 voltage: 1.200V
INFO: PMIC: dcdc6 voltage: 1.100V
INFO: PMIC: dldo1 voltage: 3.300V
INFO: PMIC: dldo2 voltage: 1.800V
INFO: PMIC: dldo3 voltage: 2.800V
INFO: PMIC: dldo4 voltage: 1.800V
INFO: PMIC: fldo1 voltage: 1.200V
INFO: PMIC: Enabling DC SW
INFO: BL31: Platform setup done
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 843419 was applied
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
INFO: BL31: cortex_a53: CPU workaround for 1530924 was applied
INFO: PSCI: Suspend is unavailable
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x4a000000
INFO: SPSR = 0x3c9
U-Boot 2021.07 (Oct 25 2021 - 23:03:18 +0200) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: Pine64 PinePhone (1.2)
DRAM: 2 GiB
MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
Loading Environment from FAT... Unable to use mmc 1:1... In: serial
Out: serial
Err: serial
Net: No ethernet found.
starting USB...
No working controllers found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk m...@1c0f000.blk...
** Unrecognized filesystem type **
Card did not respond to voltage select! : -110
Scanning disk m...@1c10000.blk...
Disk m...@1c10000.blk not ready
Scanning disk m...@1c11000.blk...
Found 6 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efi
170694 bytes read in 10 ms (16.3 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Booting /efi\boot\bootaa64.efi
disks: sd0* sd1
>> OpenBSD/arm64 BOOTAA64 1.6
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 2574016+696612+13009456+631664
[216000+109+596472+233168]=0x1401e58
type 0x2 pa 0x40000000 va 0x40000000 pages 0x4000 attr 0x8
type 0x7 pa 0x44000000 va 0x44000000 pages 0x3ef2 attr 0x8
type 0x9 pa 0x47ef2000 va 0x47ef2000 pages 0x1c attr 0x8
type 0x7 pa 0x47f0e000 va 0x47f0e000 pages 0x70ee5 attr 0x8
type 0x2 pa 0xb8df3000 va 0xb8df3000 pages 0x100 attr 0x8
type 0x1 pa 0xb8ef3000 va 0xb8ef3000 pages 0x2a attr 0x8
type 0x0 pa 0xb8f1d000 va 0xb8f1d000 pages 0x7 attr 0x8
type 0x4 pa 0xb8f24000 va 0xb8f24000 pages 0x1 attr 0x8
type 0x6 pa 0xb8f25000 va 0xa3863000 pages 0x4 attr 0x8000000000000008
type 0x4 pa 0xb8f29000 va 0xb8f29000 pages 0x1 attr 0x8
type 0x6 pa 0xb8f2a000 va 0xa3868000 pages 0x4 attr 0x8000000000000008
type 0x0 pa 0xb8f2e000 va 0xb8f2e000 pages 0x1 attr 0x8
type 0x4 pa 0xb8f2f000 va 0xb8f2f000 pages 0x1 attr 0x8
type 0x0 pa 0xb8f30000 va 0xb8f30000 pages 0x1 attr 0x8
type 0x4 pa 0xb8f31000 va 0xb8f31000 pages 0x2 attr 0x8
type 0x0 pa 0xb8f33000 va 0xb8f33000 pages 0x2 attr 0x8
type 0x4 pa 0xb8f35000 va 0xb8f35000 pages 0x1 attr 0x8
type 0x0 pa 0xb8f36000 va 0xb8f36000 pages 0x1 attr 0x8
type 0x4 pa 0xb8f37000 va 0xb8f37000 pages 0x2 attr 0x8
type 0x0 pa 0xb8f39000 va 0xb8f39000 pages 0x1 attr 0x8
type 0x4 pa 0xb8f3a000 va 0xb8f3a000 pages 0x2 attr 0x8
type 0x2 pa 0xb8f3c000 va 0xb8f3c000 pages 0x5024 attr 0x8
type 0x5 pa 0xbdf60000 va 0xa889e000 pages 0x10 attr 0x8000000000000008
type 0x2 pa 0xbdf70000 va 0xbdf70000 pages 0x2090 attr 0x8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.0 (RAMDISK) #1250: Thu Sep 30 17:13:12 MDT 2021
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 2027778048 (1933MB)
avail mem = 1928523776 (1839MB)
random: boothowto does not indicate good seed
mainbus0 at root: Pine64 PinePhone (1.2)
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20210700
"display-engine" at mainbus0 not configured
"osc24M_clk" at mainbus0 not configured
"osc32k_clk" at mainbus0 not configured
"pmu" at mainbus0 not configured
"sound" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
simplebus0 at mainbus0: "soc"
sxisyscon0 at simplebus0
sxisid0 at simplebus0
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 103 pins
ampintc0 at simplebus0 nirq 224, ncpu 4: "interrupt-controller"
sxirtc0 at simplebus0
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 13 pins
sxirsb0 at simplebus0
"x-powers,axp803" at sxirsb0 addr 0x3a3 not configured
"bus" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
"video-codec" at simplebus0 not configured
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
sximmc1 at simplebus0
sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma
sximmc2 at simplebus0
sdmmc2 at sximmc2: 8-bit, sd high-speed, mmc high-speed, dma
"crypto" at simplebus0 not configured
"mailbox" at simplebus0 not configured
"usb" at simplebus0 not configured
"phy" at simplebus0 not configured
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
ohci0 at simplebus0: version 1.0
ehci1 at simplebus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
ohci1 at simplebus0: version 1.0
"lradc" at simplebus0 not configured
"dai" at simplebus0 not configured
"codec" at simplebus0 not configured
"thermal-sensor" at simplebus0 not configured
com0 at simplebus0: ns16550, no working fifo
com0: console
com1 at simplebus0: ns16550, no working fifo
com2 at simplebus0: ns16550, no working fifo
sxitwi0 at simplebus0
iic0 at sxitwi0
"goodix,gt917s" at iic0 addr 0x5d not configured
sxitwi1 at simplebus0
iic1 at sxitwi1
"st,lis3mdl-magn" at iic1 addr 0x1e not configured
"sensortek,stk3311" at iic1 addr 0x48 not configured
"invensense,mpu6050" at iic1 addr 0x68 not configured
sxitwi2 at simplebus0
iic2 at sxitwi2
"gpu" at simplebus0 not configured
"dram-controller" at simplebus0 not configured
"dsi" at simplebus0 not configured
"d-phy" at simplebus0 not configured
"deinterlace" at simplebus0 not configured
"hdmi-phy" at simplebus0 not configured
"interrupt-controller" at simplebus0 not configured
"codec-analog" at simplebus0 not configured
"pwm" at simplebus0 not configured
sxidog0 at simplebus0
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio1: 32 pins
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00
addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00
addr 1
"opp_table0" at mainbus0 not configured
"backlight" at mainbus0 not configured
"leds" at mainbus0 not configured
"ps-regulator" at mainbus0 not configured
"vbat-wifi" at mainbus0 not configured
"led-controller" at mainbus0 not configured
"audio-amplifier" at mainbus0 not configured
"vibrator" at mainbus0 not configured
"wifi-pwrseq" at mainbus0 not configured
"binman" at mainbus0 not configured
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SC32G, 0080> removable
sd0: 30436MB, 512 bytes/sector, 62333952 sectors
scsibus1 at sdmmc2: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, , 0000> removable
sd1: 15032MB, 512 bytes/sector, 30785536 sectors
manufacturer 0x024c, product 0xb703 at sdmmc1 function 1 not configured
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: bad clock chip time
WARNING: CHECK AND RESET THE DATE!
cpu0: regulator not implemented
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/arm64 7.0 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
