Hello,
I am still attempting to obtain a working server
out of my Firefly-RK3399, or at least boot obsd
from it.
I have more or less configured a multimedia station
out of Android right now, tinkering a bit with the
card, but that is not really what I want.
Somebody (Oliv) on the french forums suggested I
have to "shunt" (new term to me) the card using
jumpers, could it be that it's the only thing
I am missing ?
In any case, here is what I have done this morning
(following snapshots/arm64/INSTALL.arm64) using 6.9-beta
and up-to-date packages, and the result on console :
$ cd Bidouillage/arm/local.obsd/
$ ftp https://ftp.openbsd.org/pub/OpenBSD/snapshots/arm64/miniroot69.img
$ ftp https://ftp.openbsd.org/pub/OpenBSD/snapshots/arm64/SHA256
$ ftp https://ftp.openbsd.org/pub/OpenBSD/snapshots/arm64/SHA256.sig
$ signify -C -p /etc/signify/openbsd-69-base.pub -x SHA256.sig
miniroot69.img
# dd if=miniroot69.img of=/dev/rsd1c bs=1m
# dd if=/usr/local/share/u-boot/firefly-rk3399/idbloader.img
of=/dev/sd1c seek=64
# dd if=/usr/local/share/u-boot/firefly-rk3399/u-boot.itb of=/dev/sd1c
seek=16384
# mount /dev/sd1i /mnt/sd_firefly/
# mkdir /mnt/sd_firefly/rockchip
# cp /usr/local/share/dtb/arm64/rockchip/rk3399-firefly.dtb
/mnt/sd_firefly/rockchip/
# umount /mnt/sd_firefly/
$ doas cu -s 1500000 -l /dev/cuaU0 2>&1 | tee Desktop/boot-firefly.txt
DDR Version 1.23 20190709
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA17AA1, stride = 0xD
OUT
Boot1: 2018-08-06, version: 1.15
CPUId = 0x0
ChipType = 0x10, 215
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 202382
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
GPT 0x3190d20 signature is wrong
LoadTrust Addr:0x4000
LoadTrust Addr:0x4400
LoadTrust Addr:0x4800
LoadTrust Addr:0x4c00
LoadTrust Addr:0x5000
LoadTrust Addr:0x5400
LoadTrust Addr:0x5800
LoadTrust Addr:0x5c00
Addr:0x4000 No find trust.img!
LoadTrustBL error:-3
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
GPT 0x3190d20 signature is wrong
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x84184
RunBL31 0x10000
^ANOTICE: BL31: v1.3(debug):22b599a
NOTICE: BL31: Built : 11:03:32, Jul 10 2019
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver
initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1181): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing
(1.1.0-195-g8f090d20 #6 Fri Dec 7 06:11:20 UTC 2018 aarch64)
^MINF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
^MINF [0x0] TEE-CORE:init_teecore:83: teecore inits done
^MINFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2014.10-RK3399-06 (May 15 2020 - 15:55:15)
CPU: rk3399
cpu version = 0
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 800000000HZ
aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ,
pclk_periph_h = 33333333HZ
aclk_periph_l0 = 266666666HZ, hclk_periph_l0 =
88888888HZ, pclk_periph_l0 = 44444444HZ
hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
cpll = 800000000HZ
dpll = 800000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM: Found dram banks: 1
Adding bank:0000000000200000(00000000ffe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01e00000
128 MiB
SdmmcInit = 0 0
SDCard Update.
storage init OK!
Using default environment
GetParam
W: Invalid Parameter's tag (0x00000000)!
Invalid parameter
No pmic detect.
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 800000000HZ
aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ,
pclk_periph_h = 33333333HZ
aclk_periph_l0 = 266666666HZ, hclk_periph_l0 =
88888888HZ, pclk_periph_l0 = 44444444HZ
hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
cpll = 800000000HZ
dpll = 800000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
misc partition not found!
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 0000-00-00#0.00
empty serial no.
Writing env to storage...
done
normal boot.
no fuel gauge found
no fuel gauge found
read logo on state from dts [0]
no fuel gauge found
'recovery' does not seem to be a partition nor an address
Unable to boot:recovery
try to start backup
'backup' does not seem to be a partition nor an address
Unable to boot:backup
try to start rockusb
And then the card stays on (with the video red light on)
and idle until I reboot or stop it ...
Note that the armbian project mentions needing about
two minutes to boot in order to populate from the device tree blob.
https://www.armbian.com/firefly-rk3399/
--
Sylvain S
from webmail
