I get the following when trying to install arm64 on my RPi 4 (4GB RAM):
disks: sd0* sd1
OpenBSD/arm64 BOOTAA64 1.2
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 2357768+668612+8777672+715720
[195459+109+574488+215117]=0xff
e7b0
FACP CSRT DBG2 GTDT APIC PPTT BGRT
Clearly it's getting far enough to try to load the kernel, but then dies.
I am using the latest available miniroot
-rw-rw-r-- 1 lnelson lnelson 34603008 Oct 17 13:57 miniroot68.img
and the sha256 signature matches. It was written to the 2nd sd card (the
one on usb) with:
sudo dd if=miniroot68.img of=/dev/sda bs=1M status=progress
My SD card in the slot has UEFI Firmware v1.20. That much is working
since I get as far as trying to load the kernel.
The RPi eeprom is:
BCM2711 detected
Dedicated VL805 EEPROM detected
BOOTLOADER: up-to-date
CURRENT: Thu 03 Sep 2020 12:11:43 PM UTC (1599135103)
LATEST: Thu 03 Sep 2020 12:11:43 PM UTC (1599135103)
FW DIR: /lib/firmware/raspberrypi/bootloader/critical
VL805: up-to-date
CURRENT: 000138a1
LATEST: 000138a1
What am I missing?
