> Date: Wed, 20 May 2020 08:23:53 +0200 > From: Oliver Seidel <oli...@os10000.net> > > Hello Stuart, > > many thanks for your answer. Here in germany we have a phrase > > "wer Lesen kann ist klar im Vorteil" -- you might benefit if you were > willing to read the instructions > > I had not even known about acpi and device tree mode. I will read up > about it and come back to you, > > Oliver > > On 2020-05-19 22:55, Stuart Henderson wrote: > > Oh, did you leave it in acpi mode or switch to device tree? You'll > > need > > some files from https://github.com/raspberrypi/firmware/tree/next/boot > > if it's in device tree mode. > > > > From kettenis@: > > > > "A workaround is to take the bcm2711-rpi-4-b.dtb, fixup4.dat and > > start4.elf files from > > > > https://github.com/raspberrypi/firmware/tree/next/boot > > > > and put them on the MS-DOS partition of your uSD card."
Note that the latest official release now has the "rgmii-rxid" issue fixed so you can grab the files from https://github.com/raspberrypi/firmware/tree/master/boot instead. Maybe we should ask jsg@ to update the firmware package again?
