On Tue, 2020-03-24 at 15:53 +0100, Mark Kettenis wrote: > > > > From: Kurt Miller <k...@intricatesoftware.com> > > Date: Tue, 24 Mar 2020 09:48:01 -0400 > > > > On Fri, 2020-03-20 at 16:24 +0100, Sebastian Reitenbach wrote: > > > > > > Hi, > > > > > > Am Donnerstag, März 19, 2020 03:32 CET, schrieb Lear Zhou > > > <lhzho...@gmail.com>: > > > > > > > > > > > > > > > Hi, > > > > > > > > Today my Rock64 arrived, after format the sd card, and put u-boot from > > > > current, the machine > > > > started to install via net wired to a switch. > > > > > > > > After preparations, when it should start downloading packages from > > > > internet, it just stuck > > > > there, 0 progress. > > > > > > > > Yes, I have read in the mail-list that someone have encountered the same > > > > kind of trouble. > > > > My question is, is there a solution for this? > > > > > > > > Since I also read in the mail list that someone successfully recovered > > > > the > > > > ethernet, just I > > > > didn't find a non hardware hacking solution which I am be able to apply. > > > yesterday I got the soldering flux, the last bit missing, but haven't yet > > > found time to solder it, but will likely do so in the next days and > > > report back. > > > > > I purchased a Rock64 v2.0 board and also have the ethernet > > problems with OpenBSD-current. There are people who have > > modified the board to correct the problem and posted instructions > > on how to do that. However, I tested Arbian's and ayufan's linux > > on my board and the ethernet works fine so a software solution is > > possible as well. > Kurt, can you list the exact version of that kernel? Something I can > trace back to a specific git hash...
Sure, I tried these: Armbian_20.02.1_Rock64_bionic_current_5.4.20_desktop.img kernel version: 5.4.20 https://dl.armbian.com/rock64/Bionic_current_desktop bionic-minimal-rock64-0.9.16-1163-arm64.img kernel version: 4.4.197 https://github.com/ayufan-rock64/linux-build/releases > On my Rock64 v2.0 board the network interface is fairly solid if I > configure it for 100baseTX using: > > # ifconfig dwge0 media 100baseTX mediaopt full-duplex > Thanks, I'll give that a try soon. -Kurt
