….Let's install the sets!
…… since we don’t have RJ45 on this board(only brcmfmac WLAN) we will prepare
an USB-stick
With the sets on it and mount it(sd0 is the emmc in this case while sd1 is the
USBstick) :
….
Welcome to the OpenBSD/arm64 6.6 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? umass0 at uhub0 port 1
configuration 1 interface 0 "SanDisk Ultra USB 3.0" rev 2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SanDisk, Ultra USB 3.0, 1.00> removable
serial.07815591260314105595
sd1: 29327MB, 512 bytes/sector, 60062500 sectors
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? I
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
Terminal type? [vt220]
System hostname? (short form, e.g. 'foo') unixcomp
Available network interfaces are: bwfm0 vlan0.
Which network interface do you wish to configure? (or 'done') [bwfm0] done
DNS domain name? (e.g. 'example.com') [my.domain] de
DNS nameservers? (IP address list or 'none') [none]
Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Setup a user? (enter a lower-case loginname, or 'no') [no]
Since no user was setup, root logins via sshd(8) might be useful.
WARNING: root is targeted by password guessing attacks, pubkeys are safer.
Allow root ssh login? (yes, no, prohibit-password) [no] yes
Available disks are: sd0 sd1.
Which disk is the root disk? ('?' for details) [sd0] sd2
no such disk
Available disks are: sd0 sd1.
Which disk is the root disk? ('?' for details) [sd0] sd0
Disk: sd0 geometry: 3720/255/63 [59768832 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
*0: 0C 2 10 9 - 2 140 10 [ 32768: 8192 ] FAT32L
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: A6 2 140 11 - 4 52 48 [ 40960: 26624 ] OpenBSD
Use (W)hole disk or (E)dit the MBR? [whole]
Creating a msdos partition and an OpenBSD partition for rest of sd0...done.
/dev/rsd0i: 32668 sectors in 8167 FAT16 clusters (2048 bytes/cluster)
bps=512 spc=4 res=1 nft=2 rde=512 mid=0xf8 spf=32 spt=63 hds=255 hid=32768
bsec=32768
The auto-allocated layout for sd0 is:
# size offset fstype [fsize bsize cpg]
a: 1024.0M 65536 4.2BSD 2048 16384 1 # /
b: 1917.0M 2162688 swap
c: 29184.0M 0 unused
d: 1589.6M 6088704 4.2BSD 2048 16384 1 # /tmp
e: 2468.1M 9344192 4.2BSD 2048 16384 1 # /var
f: 2418.5M 14398848 4.2BSD 2048 16384 1 # /usr
g: 935.1M 19351904 4.2BSD 2048 16384 1 # /usr/X11R6
h: 3779.5M 21266976 4.2BSD 2048 16384 1 # /usr/local
i: 16.0M 32768 MSDOS
j: 1667.4M 29007360 4.2BSD 2048 16384 1 # /usr/src
k: 5854.8M 32422176 4.2BSD 2048 16384 1 # /usr/obj
l: 7498.1M 44412800 4.2BSD 2048 16384 1 # /home
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a]
/dev/rsd0a: 1024.0MB in 2097152 sectors of 512 bytes
6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0l: 7498.1MB in 15356032 sectors of 512 bytes
38 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0d: 1589.6MB in 3255488 sectors of 512 bytes
8 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0f: 2418.5MB in 4953056 sectors of 512 bytes
12 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0g: 935.1MB in 1915072 sectors of 512 bytes
5 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0h: 3779.5MB in 7740384 sectors of 512 bytes
19 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0k: 5854.8MB in 11990624 sectors of 512 bytes
29 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0j: 1667.4MB in 3414816 sectors of 512 bytes
9 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0e: 2468.1MB in 5054656 sectors of 512 bytes
13 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
Available disks are: sd1.
Which disk do you wish to initialize? (or 'done') [done] /dev/sd0a
(dbde51ee25f47b05.a) on /mnt type ffs (rw, asynchronous, local)
/dev/sd0l (dbde51ee25f47b05.l) on /mnt/home type ffs (rw, asynchronous, local,
nodev, nosuid)
/dev/sd0d (dbde51ee25f47b05.d) on /mnt/tmp type ffs (rw, asynchronous, local,
nodev, nosuid)
/dev/sd0f (dbde51ee25f47b05.f) on /mnt/usr type ffs (rw, asynchronous, local,
nodev)
/dev/sd0g (dbde51ee25f47b05.g) on /mnt/usr/X11R6 type ffs (rw, asynchronous,
local, nodev)
/dev/sd0h (dbde51ee25f47b05.h) on /mnt/usr/local type ffs (rw, asynchronous,
local, nodev)
/dev/sd0k (dbde51ee25f47b05.k) on /mnt/usr/obj type ffs (rw, asynchronous,
local, nodev, nosuid)
/dev/sd0j (dbde51ee25f47b05.j) on /mnt/usr/src type ffs (rw, asynchronous,
local, nodev, nosuid)
/dev/sd0e (dbde51ee25f47b05.e) on /mnt/var type ffs (rw, asynchronous, local,
nodev, nosuid)
Let's install the sets!
Location of sets? (disk http nfs or 'done') [http] disk
Is the disk partition already mounted? [yes]
Pathname to the sets? (or 'done') [6.6/arm64] /
Looked at file:///mnt2// and found no OpenBSD/arm64 6.6 sets. The set names
looked for were:
bsd man66.tgz xserv66.tgz
bsd.mp game66.tgz site66.tgz
bsd.rd xbase66.tgz site66-unixcomp.tgz
base66.tgz xshare66.tgz
comp66.tgz xfont66.tgz
Location of sets? (disk http nfs or 'done') [disk] disk
Is the disk partition already mounted? [yes] no
Available disks are: sd0 sd1.
Which disk contains the install media? (or 'done') [sd1]
i: 409600 40 MSDOS
j: 59650048 411648 MSDOS
Available sd1 partitions are: i j.
Which sd1 partition has the install sets? (or 'done') [i] j
Pathname to the sets? (or 'done') [6.6/arm64] /
INSTALL.arm64 not found. Use sets found here anyway? [no] yes
Select sets by entering a set name, a file name pattern or 'all'. De-select
sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'.
[X] bsd [X] base66.tgz [X] game66.tgz [X] xfont66.tgz
[X] bsd.mp [X] comp66.tgz [X] xbase66.tgz [X] xserv66.tgz
[X] bsd.rd [X] man66.tgz [X] xshare66.tgz
Set name(s)? (or 'abort' or 'done') [done]
Directory does not contain SHA256.sig. Continue without verification? [no] yes
Installing bsd 0% | | 0 --:--
ETInstalling bsd 40% |********** | 4608 KB 00:01
ETInstalling bsd 76% |******************* | 8832 KB 00:00
ETInstalling bsd 100% |**************************| 11514 KB 00:02
Installing bsd.mp 0% | | 0 --:--
ETInstalling bsd.mp 36% |********* | 4224 KB 00:01
ETInstalling bsd.mp 73% |****************** | 8448 KB 00:00
ETInstalling bsd.mp 100% |**************************| 11519 KB 00:02
Installing bsd.rd 0% | | 0 --:--
ETInstalling bsd.rd 37% |********* | 4736 KB 00:01
ETInstalling bsd.rd 71% |****************** | 8960 KB 00:00
ETInstalling bsd.rd 100% |**************************| 12494 KB 00:02
Installing base66.tgz 0% | | 0 --:--
ETInstalling base66.tgz 0% | | 1792 KB 01:45
ETInstalling base66.tgz 2% | | 3840 KB 01:35
ETInstalling base66.tgz 3% | | 6144 KB 01:28
ETInstalling base66.tgz 4% |* | 8320 KB 01:27
ETInstalling base66.tgz 5% |* | 10624 KB 01:23
ETInstalling base66.tgz 6% |* | 12800 KB 01:22
ETInstalling base66.tgz 7% |* | 14464 KB 01:24
ETInstalling base66.tgz 8% |** | 16512 KB 01:22
ETInstalling base66.tgz 9% |** | 18560 KB 01:22
ETInstalling base66.tgz 10% |** | 20608 KB 01:21
ETInstalling base66.tgz 12% |*** | 22528 KB 01:20
ETInstalling base66.tgz 13% |*** | 24448 KB 01:20
ETInstalling base66.tgz 14% |*** | 26368 KB 01:19
ETInstalling base66.tgz 15% |*** | 28288 KB 01:18
ETInstalling base66.tgz 16% |**** | 30336 KB 01:17
ETInstalling base66.tgz 17% |**** | 32256 KB 01:17
ETInstalling base66.tgz 18% |**** | 34304 KB 01:16
ETInstalling base66.tgz 19% |**** | 36352 KB 01:14
ETInstalling base66.tgz 20% |***** | 38272 KB 01:14
ETInstalling base66.tgz 21% |***** | 40064 KB 01:13
ETInstalling base66.tgz 22% |***** | 42240 KB 01:12
ETInstalling base66.tgz 23% |***** | 44544 KB 01:10
ETInstalling base66.tgz 25% |****** | 46976 KB 01:08
ETInstalling base66.tgz 26% |****** | 49152 KB 01:07
ETInstalling base66.tgz 27% |******* | 51456 KB 01:06
ETInstalling base66.tgz 28% |******* | 53632 KB 01:04
ETInstalling base66.tgz 29% |******* | 55552 KB 01:04
ETInstalling base66.tgz 30% |******* | 56960 KB 01:04
ETInstalling base66.tgz 31% |******** | 58752 KB 01:03
ETInstalling base66.tgz 32% |******** | 61056 KB 01:02
ETInstalling base66.tgz 33% |******** | 63360 KB 01:00
ETInstalling base66.tgz 34% |******** | 65664 KB 00:59
ETInstalling base66.tgz 35% |********* | 67456 KB 00:58
ETInstalling base66.tgz 36% |********* | 68864 KB 00:58
ETInstalling base66.tgz 37% |********* | 70656 KB 00:57
ETInstalling base66.tgz 38% |********* | 72064 KB 00:57
ETInstalling base66.tgz 39% |********** | 73600 KB 00:57
ETInstalling base66.tgz 40% |********** | 75136 KB 00:56
ETInstalling base66.tgz 40% |********** | 76800 KB 00:56
ETInstalling base66.tgz 41% |********** | 78464 KB 00:55
ETInstalling base66.tgz 42% |********** | 79616 KB 00:55
ETInstalling base66.tgz 43% |*********** | 81664 KB 00:54
ETInstalling base66.tgz 44% |*********** | 82944 KB 00:54
ETInstalling base66.tgz 44% |*********** | 84096 KB 00:54
ETInstalling base66.tgz 45% |*********** | 85760 KB 00:53
ETInstalling base66.tgz 46% |*********** | 87424 KB 00:52
ETInstalling base66.tgz 47% |************ | 88960 KB 00:52
ETInstalling base66.tgz 48% |************ | 90880 KB 00:51
ETInstalling base66.tgz 49% |************ | 92672 KB 00:50
ETInstalling base66.tgz 50% |************* | 94976 KB 00:48
ETInstalling base66.tgz 52% |************* | 98176 KB 00:46
ETInstalling base66.tgz 53% |************* | 98 MB 00:44
ETInstalling base66.tgz 55% |************** | 101 MB 00:42
ETInstalling base66.tgz 57% |************** | 104 MB 00:40
ETInstalling base66.tgz 58% |*************** | 107 MB 00:38
ETInstalling base66.tgz 60% |*************** | 110 MB 00:36
ETInstalling base66.tgz 62% |**************** | 113 MB 00:34
ETInstalling base66.tgz 63% |**************** | 116 MB 00:33
ETInstalling base66.tgz 65% |**************** | 119 MB 00:31
ETInstalling base66.tgz 66% |***************** | 122 MB 00:29
ETInstalling base66.tgz 68% |***************** | 125 MB 00:28
ETInstalling base66.tgz 69% |***************** | 128 MB 00:26
ETInstalling base66.tgz 71% |****************** | 131 MB 00:24
ETInstalling base66.tgz 73% |****************** | 134 MB 00:23
ETInstalling base66.tgz 74% |******************* | 137 MB 00:21
ETInstalling base66.tgz 76% |******************* | 140 MB 00:20
ETInstalling base66.tgz 77% |******************** | 142 MB 00:19
ETInstalling base66.tgz 78% |******************** | 144 MB 00:18
ETInstalling base66.tgz 80% |******************** | 147 MB 00:16
ETInstalling base66.tgz 81% |********************* | 150 MB 00:15
ETInstalling base66.tgz 83% |********************* | 153 MB 00:13
ETInstalling base66.tgz 85% |********************** | 156 MB 00:12
ETInstalling base66.tgz 86% |********************** | 158 MB 00:11
ETInstalling base66.tgz 87% |********************** | 160 MB 00:10
ETInstalling base66.tgz 89% |*********************** | 163 MB 00:09
ETInstalling base66.tgz 90% |*********************** | 166 MB 00:07
ETInstalling base66.tgz 92% |*********************** | 169 MB 00:06
ETInstalling base66.tgz 93% |************************ | 171 MB 00:05
ETInstalling base66.tgz 95% |************************ | 175 MB 00:03
ETInstalling base66.tgz 96% |************************ | 177 MB 00:02
ETInstalling base66.tgz 97% |************************* | 178 MB 00:01
ETInstalling base66.tgz 98% |************************* | 180 MB 00:01
ETInstalling base66.tgz 99% |************************* | 181 MB 00:00
ETInstalling base66.tgz 99% |************************* | 182 MB 00:00
ETInstalling base66.tgz 100% |**************************| 183 MB 01:24
Extracting etc.tgz 0% | | 0 --:--
ETExtracting etc.tgz 100% |**************************| 260 KB 00:00
Installing comp66.tgz 0% | | 0 --:--
ETInstalling comp66.tgz 3% | | 1536 KB 00:32
ETInstalling comp66.tgz 6% |* | 3200 KB 00:30
ETInstalling comp66.tgz 8% |** | 4480 KB 00:31
ETInstalling comp66.tgz 12% |*** | 6272 KB 00:28
ETInstalling comp66.tgz 15% |*** | 8064 KB 00:26
ETInstalling comp66.tgz 19% |**** | 9984 KB 00:24
ETInstalling comp66.tgz 23% |***** | 11904 KB 00:23
ETInstalling comp66.tgz 27% |******* | 13824 KB 00:21
ETInstalling comp66.tgz 30% |******* | 15744 KB 00:20
ETInstalling comp66.tgz 34% |******** | 17664 KB 00:18
ETInstalling comp66.tgz 38% |********* | 19584 KB 00:17
ETInstalling comp66.tgz 41% |********** | 21376 KB 00:16
ETInstalling comp66.tgz 45% |*********** | 23168 KB 00:15
ETInstalling comp66.tgz 49% |************ | 25088 KB 00:14
ETInstalling comp66.tgz 52% |************* | 26880 KB 00:13
ETInstalling comp66.tgz 56% |************** | 28800 KB 00:12
ETInstalling comp66.tgz 60% |*************** | 30848 KB 00:11
ETInstalling comp66.tgz 63% |**************** | 32512 KB 00:10
ETInstalling comp66.tgz 67% |***************** | 34688 KB 00:09
ETInstalling comp66.tgz 72% |****************** | 36864 KB 00:07
ETInstalling comp66.tgz 76% |******************* | 39168 KB 00:06
ETInstalling comp66.tgz 81% |********************* | 41472 KB 00:05
ETInstalling comp66.tgz 84% |********************* | 43008 KB 00:04
ETInstalling comp66.tgz 86% |********************** | 44416 KB 00:03
ETInstalling comp66.tgz 89% |*********************** | 45568 KB 00:03
ETInstalling comp66.tgz 91% |*********************** | 46976 KB 00:02
ETInstalling comp66.tgz 94% |************************ | 48256 KB 00:01
ETInstalling comp66.tgz 97% |************************* | 49664 KB 00:00
ETInstalling comp66.tgz 98% |************************* | 50560 KB 00:00
ETInstalling comp66.tgz 100% |**************************| 51112 KB 00:29
Installing man66.tgz 0% | | 0 --:--
ETInstalling man66.tgz 5% |* | 384 KB 00:18
ETInstalling man66.tgz 5% |* | 384 KB 00:36
ETInstalling man66.tgz 13% |*** | 1024 KB 00:18
ETInstalling man66.tgz 36% |********* | 2688 KB 00:07
ETInstalling man66.tgz 56% |************** | 4224 KB 00:03
ETInstalling man66.tgz 77% |******************** | 5760 KB 00:01
ETInstalling man66.tgz 93% |************************ | 6912 KB 00:00
ETInstalling man66.tgz 100% |**************************| 7418 KB 00:07
Installing game66.tgz 0% | | 0 --:--
ETInstalling game66.tgz 51% |************* | 1408 KB 00:00
ETInstalling game66.tgz 100% |**************************| 2730 KB 00:01
Installing xbase66.tgz 0% | | 0 --:--
ETInstalling xbase66.tgz 10% |** | 2048 KB 00:08
ETInstalling xbase66.tgz 20% |***** | 3840 KB 00:07
ETInstalling xbase66.tgz 28% |******* | 5504 KB 00:07
ETInstalling xbase66.tgz 37% |********* | 7168 KB 00:06
ETInstalling xbase66.tgz 44% |*********** | 8448 KB 00:06
ETInstalling xbase66.tgz 51% |************* | 9728 KB 00:05
ETInstalling xbase66.tgz 59% |*************** | 11392 KB 00:04
ETInstalling xbase66.tgz 67% |***************** | 12800 KB 00:03
ETInstalling xbase66.tgz 77% |******************** | 14720 KB 00:02
ETInstalling xbase66.tgz 86% |********************** | 16384 KB 00:01
ETInstalling xbase66.tgz 96% |************************ | 18304 KB 00:00
ETInstalling xbase66.tgz 100% |**************************| 19038 KB 00:11
Extracting xetc.tgz 0% | | 0 --:--
ETExtracting xetc.tgz 100% |**************************| 7018 00:00
Installing xshare66.tgz 0% | | 0 --:--
ETInstalling xshare66.tgz 19% |**** | 896 KB 00:04
ETInstalling xshare66.tgz 19% |**** | 896 KB 00:08
ETInstalling xshare66.tgz 19% |**** | 896 KB 00:12
ETInstalling xshare66.tgz 19% |**** | 896 KB 00:16
ETInstalling xshare66.tgz 39% |********** | 1792 KB 00:07
ETInstalling xshare66.tgz 54% |************** | 2432 KB 00:05
ETInstalling xshare66.tgz 85% |********************** | 3840 KB 00:01
ETInstalling xshare66.tgz 100% |**************************| 4482 KB 00:07
Installing xfont66.tgz 0% | | 0 --:--
ETInstalling xfont66.tgz 0% | | 384 KB 01:42
ETInstalling xfont66.tgz 0% | | 384 KB 03:23
ETInstalling xfont66.tgz 0% | | 384 KB 05:05
ETInstalling xfont66.tgz 4% |* | 1792 KB 01:23
ETInstalling xfont66.tgz 10% |** | 4224 KB 00:41
ETInstalling xfont66.tgz 16% |**** | 6528 KB 00:30
ETInstalling xfont66.tgz 22% |***** | 8960 KB 00:23
ETInstalling xfont66.tgz 28% |******* | 11264 KB 00:19
ETInstalling xfont66.tgz 34% |******** | 13568 KB 00:17
ETInstalling xfont66.tgz 40% |********** | 15744 KB 00:15
ETInstalling xfont66.tgz 44% |*********** | 17536 KB 00:13
ETInstalling xfont66.tgz 50% |************* | 19840 KB 00:11
ETInstalling xfont66.tgz 55% |************** | 22016 KB 00:10
ETInstalling xfont66.tgz 61% |*************** | 24064 KB 00:08
ETInstalling xfont66.tgz 66% |***************** | 26112 KB 00:07
ETInstalling xfont66.tgz 72% |****************** | 28416 KB 00:06
ETInstalling xfont66.tgz 78% |******************** | 30720 KB 00:04
ETInstalling xfont66.tgz 83% |********************* | 33024 KB 00:03
ETInstalling xfont66.tgz 89% |*********************** | 35328 KB 00:02
ETInstalling xfont66.tgz 95% |************************ | 37504 KB 00:00
ETInstalling xfont66.tgz 100% |**************************| 39344 KB 00:20
Installing xserv66.tgz 0% | | 0 --:--
ETInstalling xserv66.tgz 20% |***** | 2176 KB 00:03
ETInstalling xserv66.tgz 39% |********** | 4224 KB 00:03
ETInstalling xserv66.tgz 52% |************* | 5632 KB 00:02
ETInstalling xserv66.tgz 67% |***************** | 7296 KB 00:01
ETInstalling xserv66.tgz 85% |********************** | 9216 KB 00:00
ETInstalling xserv66.tgz 97% |************************* | 10496 KB 00:00
ETInstalling xserv66.tgz 100% |**************************| 10800 KB 00:06
Location of sets? (disk http nfs or 'done') [done] disk
Is the disk partition already mounted? [yes]
Pathname to the sets? (or 'done') [6.6/arm64] /
Looked at file:///mnt2// and found no OpenBSD/arm64 6.6 sets. The set names
looked for were:
bsd man66.tgz xserv66.tgz
bsd.mp game66.tgz site66.tgz
bsd.rd xbase66.tgz site66-unixcomp.tgz
base66.tgz xshare66.tgz
comp66.tgz xfont66.tgz
Location of sets? (disk http nfs or 'done') [done]
What timezone are you in? ('?' for list) [Canada/Mountain] Europe/Berlin
Saving configuration files... done.
Making all device nodes... done.
Multiprocessor machine; using bsd.mp instead of bsd.
Relinking to create unique kernel...
done.
CONGRATULATIONS! Your OpenBSD install has been successfully completed!
When you login to your new system the first time, please read your mail
using the 'mail' command.
Exit to (S)hell, (H)alt or (R)eboot? [reboot] syncing disks... done
rebooting...
U-Boot TPL 2020.01-dirty (Feb 23 2020 - 21:30:33)
Channel 0: LPDDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.01-dirty (Feb 23 2020 - 21:30:33 -0500)
Trying to boot from MMC2
NOTICE: BL31: v2.2(debug):2.2
NOTICE: BL31: Built : 12:03:43, Jan 11 2020
INFO: GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3
INFO: plat_rockchip_pmu_init(1624): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2020.01-dirty (Feb 23 2020 - 21:30:33 -0500)
Model: 96boards Rock960
DRAM: 3.9 GiB
PMIC: RK808
MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment
In: serial@ff1a0000
Out: serial@ff1a0000
Err: serial@ff1a0000
Model: 96boards Rock960
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Card did not respond to voltage select!
Scanning disk dw...@fe310000.blk...
Disk dw...@fe310000.blk not ready
Card did not respond to voltage select!
Scanning disk dw...@fe320000.blk...
Disk dw...@fe320000.blk not ready
Scanning disk sd...@fe330000.blk...
** Unrecognized filesystem type **
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
161090 bytes read in 30 ms (5.1 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 0.19
boot>
booting sd0a:/bsd: 7471864+1601216+538800+847504
[621059+109+867768+526405]=0xd3eb78
type 0x2 pa 0x200000 va 0x200000 pages 0x4000 attr 0x8
type 0x7 pa 0x4200000 va 0x4200000 pages 0x3eec attr 0x8
type 0x4 pa 0x80ec000 va 0x80ec000 pages 0x28 attr 0x8
type 0x7 pa 0x8114000 va 0x8114000 pages 0xec19c attr 0x8
type 0x2 pa 0xf42b0000 va 0xf42b0000 pages 0xb32 attr 0x8
type 0x7 pa 0xf4de2000 va 0xf4de2000 pages 0x1 attr 0x8
type 0x2 pa 0xf4de3000 va 0xf4de3000 pages 0x100 attr 0x8
type 0x1 pa 0xf4ee3000 va 0xf4ee3000 pages 0x28 attr 0x8
type 0x0 pa 0xf4f0b000 va 0xf4f0b000 pages 0x7 attr 0x8
type 0x4 pa 0xf4f12000 va 0xf4f12000 pages 0x1 attr 0x8
type 0x0 pa 0xf4f13000 va 0xf4f13000 pages 0x2 attr 0x8
type 0x6 pa 0xf4f15000 va 0x12c4bc7000 pages 0x1 attr 0x8000000000000008
type 0x0 pa 0xf4f16000 va 0xf4f16000 pages 0x1 attr 0x8
type 0x4 pa 0xf4f17000 va 0xf4f17000 pages 0x2 attr 0x8
type 0x6 pa 0xf4f19000 va 0x12c4bcb000 pages 0x1 attr 0x8000000000000008
type 0x2 pa 0xf4f1a000 va 0xf4f1a000 pages 0x3016 attr 0x8
type 0x5 pa 0xf7f30000 va 0x12c7be2000 pages 0x10 attr 0x8000000000000008
type 0x2 pa 0xf7f40000 va 0xf7f40000 pages 0xc0 attr 0x8
[ using 2016312 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.6 (GENERIC.MP) #269: Sat Oct 12 18:45:15 MDT 2019
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 4094197760 (3904MB)
avail mem = 3895074816 (3714MB)
mainbus0 at root: 96boards Rock960
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20200100
apm0 at mainbus0
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
agintc0 at mainbus0 sec shift 3:3 nirq 288 nredist 6 ipi: 0, 1:
"interrupt-controller"
agintcmsi0 at agintc0
syscon0 at mainbus0: "qos"
syscon1 at mainbus0: "qos"
syscon2 at mainbus0: "qos"
syscon3 at mainbus0: "qos"
syscon4 at mainbus0: "qos"
syscon5 at mainbus0: "qos"
syscon6 at mainbus0: "qos"
syscon7 at mainbus0: "qos"
syscon8 at mainbus0: "qos"
syscon9 at mainbus0: "qos"
syscon10 at mainbus0: "qos"
syscon11 at mainbus0: "qos"
syscon12 at mainbus0: "qos"
syscon13 at mainbus0: "qos"
syscon14 at mainbus0: "qos"
syscon15 at mainbus0: "qos"
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 at mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "power-management"
"power-controller" at syscon25 not configured
syscon26 at mainbus0: "syscon"
"io-domains" at syscon26 not configured
syscon27 at mainbus0: "syscon"
syscon28 at mainbus0: "syscon"
rkclock0 at mainbus0
rkclock1 at mainbus0
syscon29 at mainbus0: "syscon"
"io-domains" at syscon29 not configured
"usb2-phy" at syscon29 not configured
"usb2-phy" at syscon29 not configured
"phy" at syscon29 not configured
"pcie-phy" at syscon29 not configured
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
pwmreg0 at mainbus0
"fit-images" at mainbus0 not configured
"pmu_a53" at mainbus0 not configured
"pmu_a72" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 24000 KHz
"xin24m" at mainbus0 not configured
simplebus0 at mainbus0: "amba"
"dma-controller" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
rkpcie0 at mainbus0
rkpcie0: link training timeout
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma
dwmmc1 at mainbus0: 100 MHz base clock
sdmmc1 at dwmmc1: 4-bit, sd high-speed, mmc high-speed, dma
sdhc0 at mainbus0
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc2 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
ehci0 at mainbus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
ohci0 at mainbus0: version 1.0
ehci1 at mainbus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
ohci1 at mainbus0: version 1.0
rkdwusb0 at mainbus0: "usb"
xhci0 at rkdwusb0, xHCI 1.10
usb2 at xhci0: USB revision 3.0
uhub2 at usb2 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00
addr 1
rkdwusb1 at mainbus0: "usb"
xhci1 at rkdwusb1, xHCI 1.10
usb3 at xhci1: USB revision 3.0
uhub3 at usb3 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00
addr 1
rkiic0 at mainbus0
iic0 at rkiic0
rkiic1 at mainbus0
iic1 at rkiic1
rkiic2 at mainbus0
iic2 at rkiic2
com0 at mainbus0: ns16550, no working fifo
com1 at mainbus0: ns16550, no working fifo
com1: console
"thermal-zones" at mainbus0 not configured
rktemp0 at mainbus0
rkiic3 at mainbus0
iic3 at rkiic3
fanpwr0 at iic3 addr 0x40: SYR827, 1.00 VDC
fanpwr1 at iic3 addr 0x41: SYR828, 1.00 VDC
rkpmic0 at iic3 addr 0x1b: RK808
rkiic4 at mainbus0
iic4 at rkiic4
"pwm" at mainbus0 not configured
"pwm" at mainbus0 not configured
"dmc" at mainbus0 not configured
"efuse" at mainbus0 not configured
"phy" at mainbus0 not configured
"phy" at mainbus0 not configured
"watchdog" at mainbus0 not configured
"rktimer" at mainbus0 not configured
"i2s" at mainbus0 not configured
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"hdmi-sound" at mainbus0 not configured
"hdmi" at mainbus0 not configured
"gpu" at mainbus0 not configured
"opp-table0" at mainbus0 not configured
"opp-table1" at mainbus0 not configured
"opp-table2" at mainbus0 not configured
"sdio-pwrseq" at mainbus0 not configured
"vcc12v-dcin" at mainbus0 not configured
"vcc1v8-s0" at mainbus0 not configured
"vcc5v0-sys" at mainbus0 not configured
"vcc3v3-sys" at mainbus0 not configured
"vcc3v3-pcie-regulator" at mainbus0 not configured
"vcc5v0-host-regulator" at mainbus0 not configured
"leds" at mainbus0 not configured
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
cpu4 at mainbus0 mpidr 100: ARM Cortex-A72 r0p2
cpu4: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu4: 1024KB 64b/line 16-way L2 cache
cpu5 at mainbus0 mpidr 101: ARM Cortex-A72 r0p2
cpu5: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu5: 1024KB 64b/line 16-way L2 cache
usb4 at ohci0: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00
addr 1
usb5 at ohci1: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00
addr 1
bwfm0 at sdmmc0 function 1
manufacturer 0x02d0, product 0x4356 at sdmmc0 function 2 not configured
manufacturer 0x02d0, product 0x4356 at sdmmc0 function 3 not configured
sdmmc1: can't enable card
scsibus0 at sdmmc2: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Kingston, T52732, 0000> removable
sd0: 29184MB, 512 bytes/sector, 59768832 sectors
umass0 at uhub0 port 1 configuration 1 interface 0 "SanDisk Ultra USB 3.0" rev
2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SanDisk, Ultra USB 3.0, 1.00> removable
serial.07815591260314105595
sd1: 29327MB, 512 bytes/sector, 60062500 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd0a (dbde51ee25f47b05.a) swap on sd0b dump on sd0b
bwfm0: failed loadfirmware of file brcmfmac4356-sdio.bin
Automatic boot in progress: starting file system checks.
/dev/sd0a (dbde51ee25f47b05.a): file system is clean; not checking
/dev/sd0l (dbde51ee25f47b05.l): file system is clean; not checking
/dev/sd0d (dbde51ee25f47b05.d): file system is clean; not checking
/dev/sd0f (dbde51ee25f47b05.f): file system is clean; not checking
/dev/sd0g (dbde51ee25f47b05.g): file system is clean; not checking
/dev/sd0h (dbde51ee25f47b05.h): file system is clean; not checking
/dev/sd0k (dbde51ee25f47b05.k): file system is clean; not checking
/dev/sd0j (dbde51ee25f47b05.j): file system is clean; not checking
/dev/sd0e (dbde51ee25f47b05.e): file system is clean; not checking
pf enabled
starting network
reordering libraries: done.
openssl: generating isakmpd/iked RSA keys... done.
ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
Path to firmware: http://firmware.openbsd.org/firmware/6.6/
Installing: bwfm-firmware
http://firmware.openbsd.org/firmware/6.6/: ftp: firmware.openbsd.org: no
address associated with name
http://firmware.openbsd.org/firmware/6.6/: empty
Can't find bwfm-firmware
Checking for available binary patches...
ftp: cdn.openbsd.org: no address associated with name
starting local daemons: cron.
Sun Oct 13 03:17:41 CEST 2019
OpenBSD/arm64 (unixcomp.de) (console)
login: root
Password:
OpenBSD 6.6 (GENERIC.MP) #269: Sat Oct 12 18:45:15 MDT 2019
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
You have new mail.
unixcomp#
unixcomp# uname -a
OpenBSD unixcomp.de 6.6 GENERIC.MP#269 arm64
unixcomp# sysctl hw
hw.machine=arm64
hw.model=ARM Cortex-A53 r0p4
hw.ncpu=6
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0:dbde51ee25f47b05,sd1:
hw.diskcount=2
hw.sensors.rktemp0.temp0=40.55 degC (CPU)
hw.sensors.rktemp0.temp1=37.50 degC (GPU)
hw.cpuspeed=600
hw.setperf=20
hw.product=96boards Rock960
hw.physmem=4094197760
hw.usermem=4094185472
hw.ncpufound=6
hw.allowpowerdown=1
hw.perfpolicy=manual
hw.ncpuonline=6
unixcomp#
… part 3 will describe howto install the brcmfmac - WLAN-firmware … but I’ll
do that tomorrow…
See you later
Regards and thanks again
Klaus
