On Mon, 2020-02-03 at 21:39 +0100, Sebastian Reitenbach wrote: > Seems the latest arm64 snapshot miniroot66.fs doesn't go into single user, > first kernel that seem to broke is from: > Sun Feb 2 02:14:44 MST 2020, last working from: Fri Jan 31 21:54:51 MST 2020 > > every second it writes: > init: single user shell terminated, restarting
Thanks for reporting this. It was fixed yesterday, the next snapshot should contain the fix. > > miniroot66.fs retrieved from archive from https://ftp.hostserver.de/archive/ > > The output from last working miniroot66.fs: > > Scanning mmc 1:1... > 33543 bytes read in 8 ms (4 MiB/s) > Found EFI removable media binary efi/boot/bootaa64.efi > Scanning disk rksd...@ff500000.blk... > ** Unrecognized filesystem type ** > Card did not respond to voltage select! > Scanning disk rksd...@ff520000.blk... > Disk rksd...@ff520000.blk not ready > Found 3 disks > BootOrder not defined > EFI boot manager: Cannot load any image > 165151 bytes read in 14 ms (11.2 MiB/s) > disks: sd0* > > > > > > > > OpenBSD/arm64 BOOTAA64 0.20 > boot> > cannot open sd0a:/etc/random.seed: No such file or directory > booting sd0a:/bsd: 2233624+626496+8770856+741272 > [181074+109+524304+202392]=0xff02f0 > type 0x2 pa 0x200000 va 0x200000 pages 0x4000 attr 0x8 > type 0x7 pa 0x4200000 va 0x4200000 pages 0x3ef4 attr 0x8 > type 0x4 pa 0x80f4000 va 0x80f4000 pages 0x18 attr 0x8 > type 0x7 pa 0x810c000 va 0x810c000 pages 0x740af attr 0x8 > type 0x2 pa 0x7c1bb000 va 0x7c1bb000 pages 0xc2c attr 0x8 > type 0x4 pa 0x7cde7000 va 0x7cde7000 pages 0x1 attr 0x8 > type 0x2 pa 0x7cde8000 va 0x7cde8000 pages 0x3 attr 0x8 > type 0x7 pa 0x7cdeb000 va 0x7cdeb000 pages 0x1 attr 0x8 > type 0x2 pa 0x7cdec000 va 0x7cdec000 pages 0x100 attr 0x8 > type 0x1 pa 0x7ceec000 va 0x7ceec000 pages 0x29 attr 0x8 > type 0x0 pa 0x7cf15000 va 0x7cf15000 pages 0x5 attr 0x8 > type 0x4 pa 0x7cf1a000 va 0x7cf1a000 pages 0x1 attr 0x8 > type 0x6 pa 0x7cf1b000 va 0xa3863000 pages 0x1 attr 0x8000000000000008 > type 0x4 pa 0x7cf1c000 va 0x7cf1c000 pages 0x2 attr 0x8 > type 0x0 pa 0x7cf1e000 va 0x7cf1e000 pages 0x4 attr 0x8 > type 0x4 pa 0x7cf22000 va 0x7cf22000 pages 0x2 attr 0x8 > type 0x0 pa 0x7cf24000 va 0x7cf24000 pages 0x2 attr 0x8 > type 0x6 pa 0x7cf26000 va 0xa386e000 pages 0x1 attr 0x8000000000000008 > type 0x0 pa 0x7cf27000 va 0x7cf27000 pages 0x1 attr 0x8 > type 0x2 pa 0x7cf28000 va 0x7cf28000 pages 0x3008 attr 0x8 > type 0x5 pa 0x7ff30000 va 0xa6878000 pages 0x10 attr 0x8000000000000008 > type 0x2 pa 0x7ff40000 va 0x7ff40000 pages 0xc0 attr 0x8 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org > > OpenBSD 6.6-current (RAMDISK) #422: Fri Jan 31 21:54:51 MST 2020 > dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK > real mem = 2079993856 (1983MB) > avail mem = 1983299584 (1891MB) > mainbus0 at root: Pine64 Rock64 > cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 > cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu0: 256KB 64b/line 16-way L2 cache > efi0 at mainbus0: UEFI 2.8 > efi0: Das U-Boot rev 0x20200100 > psci0 at mainbus0: PSCI 1.1, SMCCC 1.1 > syscon0 at mainbus0: "syscon" > "io-domains" at syscon0 not configured > "grf-gpio" at syscon0 not configured > "power-controller" at syscon0 not configured > "reboot-mode" at syscon0 not configured > rkclock0 at mainbus0 > syscon1 at mainbus0: "syscon" > "usb2-phy" at syscon1 not configured > ampintc0 at mainbus0 nirq 160, ncpu 4: "interrupt-controller" > rkpinctrl0 at mainbus0: "pinctrl" > rkgpio0 at rkpinctrl0 > rkgpio1 at rkpinctrl0 > rkgpio2 at rkpinctrl0 > rkgpio3 at rkpinctrl0 > "opp_table0" at mainbus0 not configured > simplebus0 at mainbus0: "amba" > "dmac" at simplebus0 not configured > "arm-pmu" at mainbus0 not configured > "display-subsystem" at mainbus0 not configured > agtimer0 at mainbus0: tick rate 24000 KHz > "xin24m" at mainbus0 not configured > "spdif" at mainbus0 not configured > com0 at mainbus0: ns16550, no working fifo > com0: console > rkiic0 at mainbus0 > iic0 at rkiic0 > rkpmic0 at iic0 addr 0x18: RK805 > "spi" at mainbus0 not configured > "watchdog" at mainbus0 not configured > "thermal-zones" at mainbus0 not configured > "tsadc" at mainbus0 not configured > "efuse" at mainbus0 not configured > "gpu" at mainbus0 not configured > "vop" at mainbus0 not configured > "iommu" at mainbus0 not configured > "hdmi" at mainbus0 not configured > "phy" at mainbus0 not configured > dwmmc0 at mainbus0: 50 MHz base clock > sdmmc0 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma > dwmmc1 at mainbus0: 50 MHz base clock > sdmmc1 at dwmmc1: 8-bit, mmc high-speed, dma > dwge0 at mainbus0: address 7a:ff:31:d6:7e:bb > rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 > "usb" at mainbus0 not configured > ehci0 at mainbus0 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci0 at mainbus0: version 1.0 > "external-gmac-clock" at mainbus0 not configured > "sdmmc-regulator" at mainbus0 not configured > "vcc-host-5v-regulator" at mainbus0 not configured > "vcc-host1-5v-regulator" at mainbus0 not configured > "vcc-sys" at mainbus0 not configured > "sound" at mainbus0 not configured > "spdif-dit" at mainbus0 not configured > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > scsibus0 at sdmmc0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SD/MMC, EB1QT, 0030> removable > sd0: 30528MB, 512 bytes/sector, 62521344 sectors > sdmmc1: can't enable card > softraid0 at root > scsibus1 at softraid0: 256 targets > bootfile: sd0a:/bsd > boot device: sd0 > root on rd0a swap on rd0b dump on rd0b > WARNING: preposterous clock chip time > WARNING: CHECK AND RESET THE DATE! > erase ^?, werase ^W, kill ^U, intr ^C, status ^T > > Welcome to the OpenBSD/arm64 6.6 installation program. > (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? s > # > > And here the first one, that seems to be broken: > U-Boot TPL 2020.01 (Jan 12 2020 - 02:16:54) > LPDDR3, 800MHz > BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB > Trying to boot from BOOTROM > Returning to boot ROM... > > U-Boot SPL 2020.01 (Jan 12 2020 - 02:16:54 -0700) > Trying to boot from MMC1 > NOTICE: BL31: v2.2(debug):2.2 > NOTICE: BL31: Built : 02:07:28, Jan 12 2020 > ERROR: over or zero region, nr=4187432, max=10 > NOTICE: BL31:Rockchip release version: v1.2 > INFO: ARM GICv2 driver initialized > INFO: plat_rockchip_pmu_init: pd status 0xe > INFO: BL31: Initializing runtime services > WARNING: BL31: cortex_a53: CPU workaround for 855873 was missing! > INFO: BL31: Preparing for EL3 exit to normal world > INFO: Entry point address = 0x200000 > INFO: SPSR = 0x3c9 > > > U-Boot 2020.01 (Jan 12 2020 - 02:16:54 -0700) > > Model: Pine64 Rock64 > DRAM: 2 GiB > PMIC: RK8050 (on=0x40, off=0x00) > MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0 > Loading Environment from MMC... *** Warning - bad CRC, using default > environment > > In: serial@ff130000 > Out: serial@ff130000 > Err: serial@ff130000 > Model: Pine64 Rock64 > Net: eth0: ethernet@ff540000 > Hit any key to stop autoboot: 0 > Card did not respond to voltage select! > switch to partitions #0, OK > mmc1 is current device > Scanning mmc 1:1... > 33543 bytes read in 7 ms (4.6 MiB/s) > Found EFI removable media binary efi/boot/bootaa64.efi > Scanning disk rksd...@ff500000.blk... > ** Unrecognized filesystem type ** > Card did not respond to voltage select! > Scanning disk rksd...@ff520000.blk... > Disk rksd...@ff520000.blk not ready > Found 3 disks > BootOrder not defined > EFI boot manager: Cannot load any image > 165151 bytes read in 13 ms (12.1 MiB/s) > disks: sd0* > > > > > > > > OpenBSD/arm64 BOOTAA64 0.20 > boot> > cannot open sd0a:/etc/random.seed: No such file or directory > booting sd0a:/bsd: 2237720+628992+8766760+742312 > [181100+109+524184+202359]=0xfef680 > type 0x2 pa 0x200000 va 0x200000 pages 0x4000 attr 0x8 > type 0x7 pa 0x4200000 va 0x4200000 pages 0x3ef4 attr 0x8 > type 0x4 pa 0x80f4000 va 0x80f4000 pages 0x18 attr 0x8 > type 0x7 pa 0x810c000 va 0x810c000 pages 0x740af attr 0x8 > type 0x2 pa 0x7c1bb000 va 0x7c1bb000 pages 0xc2c attr 0x8 > type 0x4 pa 0x7cde7000 va 0x7cde7000 pages 0x1 attr 0x8 > type 0x2 pa 0x7cde8000 va 0x7cde8000 pages 0x3 attr 0x8 > type 0x7 pa 0x7cdeb000 va 0x7cdeb000 pages 0x1 attr 0x8 > type 0x2 pa 0x7cdec000 va 0x7cdec000 pages 0x100 attr 0x8 > type 0x1 pa 0x7ceec000 va 0x7ceec000 pages 0x29 attr 0x8 > type 0x0 pa 0x7cf15000 va 0x7cf15000 pages 0x5 attr 0x8 > type 0x4 pa 0x7cf1a000 va 0x7cf1a000 pages 0x1 attr 0x8 > type 0x6 pa 0x7cf1b000 va 0xa3863000 pages 0x1 attr 0x8000000000000008 > type 0x4 pa 0x7cf1c000 va 0x7cf1c000 pages 0x2 attr 0x8 > type 0x0 pa 0x7cf1e000 va 0x7cf1e000 pages 0x4 attr 0x8 > type 0x4 pa 0x7cf22000 va 0x7cf22000 pages 0x2 attr 0x8 > type 0x0 pa 0x7cf24000 va 0x7cf24000 pages 0x2 attr 0x8 > type 0x6 pa 0x7cf26000 va 0xa386e000 pages 0x1 attr 0x8000000000000008 > type 0x0 pa 0x7cf27000 va 0x7cf27000 pages 0x1 attr 0x8 > type 0x2 pa 0x7cf28000 va 0x7cf28000 pages 0x3008 attr 0x8 > type 0x5 pa 0x7ff30000 va 0xa6878000 pages 0x10 attr 0x8000000000000008 > type 0x2 pa 0x7ff40000 va 0x7ff40000 pages 0xc0 attr 0x8 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org > > OpenBSD 6.6-current (RAMDISK) #423: Sun Feb 2 02:14:44 MST 2020 > dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK > real mem = 2079993856 (1983MB) > avail mem = 1983303680 (1891MB) > mainbus0 at root: Pine64 Rock64 > cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 > cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu0: 256KB 64b/line 16-way L2 cache > efi0 at mainbus0: UEFI 2.8 > efi0: Das U-Boot rev 0x20200100 > psci0 at mainbus0: PSCI 1.1, SMCCC 1.1 > syscon0 at mainbus0: "syscon" > "io-domains" at syscon0 not configured > "grf-gpio" at syscon0 not configured > "power-controller" at syscon0 not configured > "reboot-mode" at syscon0 not configured > rkclock0 at mainbus0 > syscon1 at mainbus0: "syscon" > "usb2-phy" at syscon1 not configured > ampintc0 at mainbus0 nirq 160, ncpu 4: "interrupt-controller" > rkpinctrl0 at mainbus0: "pinctrl" > rkgpio0 at rkpinctrl0 > rkgpio1 at rkpinctrl0 > rkgpio2 at rkpinctrl0 > rkgpio3 at rkpinctrl0 > "opp_table0" at mainbus0 not configured > simplebus0 at mainbus0: "amba" > "dmac" at simplebus0 not configured > "arm-pmu" at mainbus0 not configured > "display-subsystem" at mainbus0 not configured > agtimer0 at mainbus0: tick rate 24000 KHz > "xin24m" at mainbus0 not configured > "spdif" at mainbus0 not configured > com0 at mainbus0: ns16550, no working fifo > com0: console > rkiic0 at mainbus0 > iic0 at rkiic0 > rkpmic0 at iic0 addr 0x18: RK805 > "spi" at mainbus0 not configured > "watchdog" at mainbus0 not configured > "thermal-zones" at mainbus0 not configured > "tsadc" at mainbus0 not configured > "efuse" at mainbus0 not configured > "gpu" at mainbus0 not configured > "vop" at mainbus0 not configured > "iommu" at mainbus0 not configured > "hdmi" at mainbus0 not configured > "phy" at mainbus0 not configured > dwmmc0 at mainbus0: 50 MHz base clock > sdmmc0 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma > dwmmc1 at mainbus0: 50 MHz base clock > sdmmc1 at dwmmc1: 8-bit, mmc high-speed, dma > dwge0 at mainbus0: address 7a:ff:31:d6:7e:bb > rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 > "usb" at mainbus0 not configured > ehci0 at mainbus0 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci0 at mainbus0: version 1.0 > "external-gmac-clock" at mainbus0 not configured > "sdmmc-regulator" at mainbus0 not configured > "vcc-host-5v-regulator" at mainbus0 not configured > "vcc-host1-5v-regulator" at mainbus0 not configured > "vcc-sys" at mainbus0 not configured > "sound" at mainbus0 not configured > "spdif-dit" at mainbus0 not configured > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > scsibus0 at sdmmc0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SD/MMC, EB1QT, 0030> removable > sd0: 30528MB, 512 bytes/sector, 62521344 sectors > sdmmc1: can't enable card > softraid0 at root > scsibus1 at softraid0: 256 targets > bootfile: sd0a:/bsd > boot device: sd0 > root on rd0a swap on rd0b dump on rd0b > WARNING: preposterous clock chip time > WARNING: CHECK AND RESET THE DATE! > init: single user shell terminated, restarting > init: single user shell terminated, restarting > init: single user shell terminated, restarting > init: single user shell terminated, restarting >
