Hello
I do not know if the list is interested by RAID adapters on rockchip-3399.It's
my first report, please let me know if i have to provide more outputs.
My Goals, test some RAID adapters :
_ LSI 2208 (Today)
_ MEGARAID 9240 / 9260 (soon)
_ INTEL SRC16S (i do not remember (soon))
Platform : RockPro64 using u-boot-aarch64 firmware from snapshot/packages
(January 2020)(without dtb file on i partition)
F.Y.I. Without the RAID's adapter the machine is running well.
***************************************
Once adapter is plugged, Kernel Panic :
***************************************
U-Boot TPL 2019.10 (Jan 02 2020 - 15:53:24)
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2019.10 (Jan 02 2020 - 15:53:24 -0700)
Trying to boot from MMC2
NOTICE: BL31: v2.1(debug):2.1
NOTICE: BL31: Built : 15:10:01, Jan 2 2020
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: plat_rockchip_pmu_init(1596): pd status 3e
INFO: BL31: Initializing runtime services
WARNING: BL31: cortex_a53: CPU workaround for 819472 was missing!
WARNING: BL31: cortex_a53: CPU workaround for 824069 was missing!
WARNING: BL31: cortex_a53: CPU workaround for 827319 was missing!
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2019.10 (Jan 02 2020 - 15:53:24 -0700)
Model: Pine64 RockPro64
DRAM: 3.9 GiB
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@ff1a0000
Out: serial@ff1a0000
Err: serial@ff1a0000
Model: Pine64 RockPro64
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net: eth0: ethernet@fe300000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Card did not respond to voltage select!
Scanning disk dw...@fe320000.blk...
Disk dw...@fe320000.blk not ready
Scanning disk sd...@fe330000.blk...
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
165151 bytes read in 45 ms (3.5 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 0.20
boot>
booting sd0a:/bsd: 7595784+1478976+538544+847472
[504619+109+946320+533467]=0xd371f0
type 0x2 pa 0x200000 va 0x200000 pages 0x4000 attr 0x8
type 0x7 pa 0x4200000 va 0x4200000 pages 0x3eec attr 0x8
type 0x4 pa 0x80ec000 va 0x80ec000 pages 0x28 attr 0x8
type 0x7 pa 0x8114000 va 0x8114000 pages 0xec18c attr 0x8
type 0x2 pa 0xf42a0000 va 0xf42a0000 pages 0xb47 attr 0x8
type 0x4 pa 0xf4de7000 va 0xf4de7000 pages 0x1 attr 0x8
type 0x2 pa 0xf4de8000 va 0xf4de8000 pages 0x3 attr 0x8
type 0x7 pa 0xf4deb000 va 0xf4deb000 pages 0x1 attr 0x8
type 0x2 pa 0xf4dec000 va 0xf4dec000 pages 0x100 attr 0x8
type 0x1 pa 0xf4eec000 va 0xf4eec000 pages 0x29 attr 0x8
type 0x0 pa 0xf4f15000 va 0xf4f15000 pages 0x7 attr 0x8
type 0x4 pa 0xf4f1c000 va 0xf4f1c000 pages 0x1 attr 0x8
type 0x6 pa 0xf4f1d000 va 0x4979a7000 pages 0x1 attr 0x8000000000000008
type 0x4 pa 0xf4f1e000 va 0xf4f1e000 pages 0x2 attr 0x8
type 0x0 pa 0xf4f20000 va 0xf4f20000 pages 0x4 attr 0x8
type 0x4 pa 0xf4f24000 va 0xf4f24000 pages 0x2 attr 0x8
type 0x6 pa 0xf4f26000 va 0x4979b0000 pages 0x1 attr 0x8000000000000008
type 0x2 pa 0xf4f27000 va 0xf4f27000 pages 0x3019 attr 0x8
type 0x5 pa 0xf7f40000 va 0x49a9ca000 pages 0x10 attr 0x8000000000000008
type 0x2 pa 0xf7f50000 va 0xf7f50000 pages 0xb0 attr 0x8
[ using 1985488 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.6-current (GENERIC.MP) #413: Sat Jan 4 16:35:40 MST 2020
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 4094132224 (3904MB)
avail mem = 3895042048 (3714MB)
mainbus0 at root: Pine64 RockPro64
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20191000
apm0 at mainbus0
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
agintc0 at mainbus0 sec shift 3:3 nirq 288 nredist 6 ipi: 0, 1:
"interrupt-controller"
agintcmsi0 at agintc0
syscon0 at mainbus0: "qos"
syscon1 at mainbus0: "qos"
syscon2 at mainbus0: "qos"
syscon3 at mainbus0: "qos"
syscon4 at mainbus0: "qos"
syscon5 at mainbus0: "qos"
syscon6 at mainbus0: "qos"
syscon7 at mainbus0: "qos"
syscon8 at mainbus0: "qos"
syscon9 at mainbus0: "qos"
syscon10 at mainbus0: "qos"
syscon11 at mainbus0: "qos"
syscon12 at mainbus0: "qos"
syscon13 at mainbus0: "qos"
syscon14 at mainbus0: "qos"
syscon15 at mainbus0: "qos"
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 at mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "power-management"
"power-controller" at syscon25 not configured
syscon26 at mainbus0: "syscon"
"io-domains" at syscon26 not configured
syscon27 at mainbus0: "syscon"
syscon28 at mainbus0: "syscon"
rkclock0 at mainbus0
rkclock1 at mainbus0
syscon29 at mainbus0: "syscon"
"io-domains" at syscon29 not configured
"usb2-phy" at syscon29 not configured
"usb2-phy" at syscon29 not configured
rkemmcphy0 at syscon29
"pcie-phy" at syscon29 not configured
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
pwmreg0 at mainbus0
"fit-images" at mainbus0 not configured
"pmu_a53" at mainbus0 not configured
"pmu_a72" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 24000 KHz
"xin24m" at mainbus0 not configured
simplebus0 at mainbus0: "amba"
"dma-controller" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
rkpcie0 at mainbus0
pci0 at rkpcie0
ppb0 at pci0 dev 0 function 0 "Rockchip RK3399 Root Complex" rev 0x00: msi
panic: uvm_fault failed: ffffff8000213870
Stopped at panic+0x150: TID PID UID PRFLAGS PFLAGS C
PU COMMAND
* 0 0 0 0x10000 0x200 0K swapper
db_enter() at panic+0x14c
panic() at $x.0+0x6c
$x.0() at ppb_alloc_resources+0xb4
ppb_alloc_resources() at ppbattach+0x2c4
ppbattach() at config_attach+0x220
config_attach() at pci_probe_device+0x3f0
pci_probe_device() at pci_enumerate_bus+0x11c
https://www.openbsd.org/ddb.html describes the minimum info required in bug
reports. Insufficient info makes it difficult to find and fix bugs.
ddb{0}> trace
db_enter() at panic+0x14c
panic() at $x.0+0x6c
$x.0() at ppb_alloc_resources+0xb4
ppb_alloc_resources() at ppbattach+0x2c4
ppbattach() at config_attach+0x220
config_attach() at pci_probe_device+0x3f0
pci_probe_device() at pci_enumerate_bus+0x11c
pci_enumerate_bus() at config_attach+0x220
config_attach() at rkpcie_attach+0x6e0
rkpcie_attach() at config_attach+0x220
config_attach() at mainbus_attach_node+0x2c4
mainbus_attach_node() at mainbus_attach+0x298
mainbus_attach() at config_attach+0x220
config_attach() at cpu_configure+0x2c
cpu_configure() at main+0x308
main() at $x.2+0x70
ddb{0}> show panic
uvm_fault failed: ffffff8000213870
Have a nice evening :)
--
burelli.fr <oliv...@burelli.fr>
