On Sat, Oct 26, 2019 at 09:38:20AM +0200, Unicorn wrote: > > Do you have advice on how to proceed? I assume I need to build it > myself, but I don't know what exactly that entails. I would be happy to > work on it though if you point me to the general steps I need to take.
Building all the boards in ports would take a while so for just this one assuming an existing OpenBSD host Install packages arm-none-eabi-gcc-linaro bison dtc swig gsed python (2.7) ftp https://ftp.denx.de/pub/u-boot/u-boot-2019.10.tar.bz2 tar jxvf u-boot-2019.10.tar.bz2 patch -p0 < /path/to/patch cd u-boot-2019.10 mkdir -p build gmake PYTHON=python2.7 CROSS_COMPILE="arm-none-eabi-" \ O=build A20-OLinuXino-Lime2-eMMC_defconfig gmake PYTHON=python2.7 CROSS_COMPILE="arm-none-eabi-" \ O=build all The file you need will be build/u-boot-sunxi-with-spl.bin diff -upr u-boot-2019.10.orig/configs/A20-OLinuXino-Lime2-eMMC_defconfig u-boot-2019.10/configs/A20-OLinuXino-Lime2-eMMC_defconfig --- u-boot-2019.10.orig/configs/A20-OLinuXino-Lime2-eMMC_defconfig Sat Oct 26 21:36:23 2019 +++ u-boot-2019.10/configs/A20-OLinuXino-Lime2-eMMC_defconfig Sat Oct 26 21:37:03 2019 @@ -11,6 +11,7 @@ CONFIG_USB0_VBUS_DET="PH5" CONFIG_I2C1_ENABLE=y CONFIG_SATAPWR="PC3" CONFIG_SPL_SPI_SUNXI=y +CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_USE_PREBOOT=y @@ -25,6 +26,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2- CONFIG_SCSI_AHCI=y CONFIG_DFU_RAM=y CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_MII=y diff -upr u-boot-2019.10.orig/scripts/check-config.sh u-boot-2019.10/scripts/check-config.sh --- u-boot-2019.10.orig/scripts/check-config.sh Sat Oct 26 21:36:30 2019 +++ u-boot-2019.10/scripts/check-config.sh Sat Oct 26 21:36:46 2019 @@ -39,12 +39,12 @@ new_adhoc="${path}.adhoc" export LC_ALL=C export LC_COLLATE=C -cat ${path} |sed -n 's/^#define \(CONFIG_[A-Za-z0-9_]*\).*/\1/p' |sort |uniq \ +cat ${path} | gsed -n 's/^#define \(CONFIG_[A-Za-z0-9_]*\).*/\1/p' |sort |uniq \ >${configs} comm -23 ${configs} ${whitelist} > ${suspects} -cat `find ${srctree} -name "Kconfig*"` |sed -n \ +cat `find ${srctree} -name "Kconfig*"` | gsed -n \ -e 's/^\s*config *\([A-Za-z0-9_]*\).*$/CONFIG_\1/p' \ -e 's/^\s*menuconfig \([A-Za-z0-9_]*\).*$/CONFIG_\1/p' \ |sort |uniq > ${ok}
