ping
On May 07 11:25:35, h...@stare.cz wrote:
> I have just upgraded my BBB to 6.5-current. Old and new dmesg below.
> It sees less memory now than it did with 6.2; is this known?
> It does have 512M, but 6.5 only sees 455M:
>
> -OpenBSD 6.2-current (GENERIC) #167: Wed Jan 24 14:14:48 MST 2018
> - dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/GENERIC
> -real mem = 536870912 (512MB)
> -avail mem = 516919296 (492MB)
> +OpenBSD 6.5-current (GENERIC) #0: Tue May 7 07:52:33 CEST 2019
> + h...@bbb.stare.cz:/usr/src/sys/arch/armv7/compile/GENERIC
> +real mem = 477835264 (455MB)
> +avail mem = 458162176 (436MB)
>
> Jan
>
>
> OpenBSD 6.2-current (GENERIC) #167: Wed Jan 24 14:14:48 MST 2018
> dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/GENERIC
> real mem = 536870912 (512MB)
> avail mem = 516919296 (492MB)
> mainbus0 at root: TI AM335x BeagleBone Black
> cpu0 at mainbus0: ARM Cortex-A8 r3p2 (ARMv7)
> cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
> cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
> omap0 at mainbus0
> prcm0 at omap0 rev 0.2
> dmtimer0 at omap0 rev 3.1
> dmtimer1 at omap0 rev 3.1
> simplebus0 at mainbus0: "ocp"
> simplebus1 at simplebus0: "l4_wkup"
> simplebus2 at simplebus1: "scm"
> syscon0 at simplebus2: "scm_conf"
> ompinmux0 at simplebus2
> simplebus3 at simplebus2: "scm_conf"
> intc0 at simplebus0 rev 5.0
> omgpio0 at simplebus0: rev 0.1
> gpio0 at omgpio0: 32 pins
> omgpio1 at simplebus0: rev 0.1
> gpio1 at omgpio1: 32 pins
> omgpio2 at simplebus0: rev 0.1
> gpio2 at omgpio2: 32 pins
> omgpio3 at simplebus0: rev 0.1
> gpio3 at omgpio3: 32 pins
> com0 at simplebus0: ti16750, 64 byte fifo
> com0: console
> tiiic0 at simplebus0 rev 0.11
> iic0 at tiiic0
> "ti,tps65217" at iic0 addr 0x24 not configured
> "atmel,24c256" at iic0 addr 0x50 not configured
> nxphdmi0 at iic0 addr 0x70: rev 0x0301
> nxphdmi0: no display detected
> tiiic1 at simplebus0 rev 0.11
> iic1 at tiiic1
> "atmel,24c256" at iic1 addr 0x54 not configured
> "atmel,24c256" at iic1 addr 0x55 not configured
> "atmel,24c256" at iic1 addr 0x56 not configured
> "atmel,24c256" at iic1 addr 0x57 not configured
> ommmc0 at simplebus0
> sdmmc0 at ommmc0: 4-bit, sd high-speed, mmc high-speed
> ommmc1 at simplebus0
> sdmmc1 at ommmc1: 1-bit
> omdog0 at simplebus0 rev 0.1
> cpsw0 at simplebus0: version 1.12 (0), address 90:59:af:82:2e:7e
> ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI
> 0x0001f0, model 0x000f
> amdisplay0 at simplebus0
> amdisplay0: no display attached.
> scsibus0 at sdmmc1: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, MMC02G, 0000> SCSI2 0/direct removable
> sd0: 1832MB, 512 bytes/sector, 3751936 sectors
> scsibus1 at sdmmc0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <SD/MMC, SU32G, 0080> SCSI2 0/direct removable
> sd1: 30436MB, 512 bytes/sector, 62333952 sectors
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> boot device: sd0
> root on sd1a (93aae518915c8841.a) swap on sd1b dump on sd1b
> WARNING: CHECK AND RESET THE DATE!
>
>
> OpenBSD 6.5-current (GENERIC) #0: Tue May 7 07:52:33 CEST 2019
> h...@bbb.stare.cz:/usr/src/sys/arch/armv7/compile/GENERIC
> real mem = 477835264 (455MB)
> avail mem = 458162176 (436MB)
> mainbus0 at root: TI AM335x BeagleBone Black
> cpu0 at mainbus0: ARM Cortex-A8 r3p2 (ARMv7)
> cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
> cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
> omap0 at mainbus0
> prcm0 at omap0 rev 0.2
> dmtimer0 at omap0 rev 3.1
> dmtimer1 at omap0 rev 3.1
> simplebus0 at mainbus0: "ocp"
> simplebus1 at simplebus0: "l4_wkup"
> "wkup_m3" at simplebus1 not configured
> simplebus2 at simplebus1: "prcm"
> "l4_per_cm" at simplebus2 not configured
> "l4_wkup_cm" at simplebus2 not configured
> "mpu_cm" at simplebus2 not configured
> "l4_rtc_cm" at simplebus2 not configured
> "gfx_l3_cm" at simplebus2 not configured
> "l4_cefuse_cm" at simplebus2 not configured
> simplebus3 at simplebus1: "scm"
> syscon0 at simplebus3: "scm_conf"
> pinctrl0 at simplebus3
> "wkup_m3_ipc" at simplebus3 not configured
> "dma-router" at simplebus3 not configured
> intc0 at simplebus0 rev 5.0
> "edma" at simplebus0 not configured
> "tptc" at simplebus0 not configured
> "tptc" at simplebus0 not configured
> "tptc" at simplebus0 not configured
> omgpio0 at simplebus0: rev 0.1
> gpio0 at omgpio0: 32 pins
> omgpio1 at simplebus0: rev 0.1
> gpio1 at omgpio1: 32 pins
> omgpio2 at simplebus0: rev 0.1
> gpio2 at omgpio2: 32 pins
> omgpio3 at simplebus0: rev 0.1
> gpio3 at omgpio3: 32 pins
> com0 at simplebus0: ti16750, 64 byte fifo
> com0: console
> tiiic0 at simplebus0 rev 0.11
> iic0 at tiiic0
> "ti,tps65217" at iic0 addr 0x24 not configured
> "atmel,24c256" at iic0 addr 0x50 not configured
> nxphdmi0 at iic0 addr 0x70: rev 0x0301
> nxphdmi0: no display detected
> tiiic1 at simplebus0 rev 0.11
> iic1 at tiiic1
> "atmel,24c256" at iic1 addr 0x54 not configured
> "atmel,24c256" at iic1 addr 0x55 not configured
> "atmel,24c256" at iic1 addr 0x56 not configured
> "atmel,24c256" at iic1 addr 0x57 not configured
> ommmc0 at simplebus0
> sdmmc0 at ommmc0: 4-bit, sd high-speed, mmc high-speed
> ommmc1 at simplebus0
> sdmmc1 at ommmc1: 1-bit
> "spinlock" at simplebus0 not configured
> omdog0 at simplebus0 rev 0.1
> "mailbox" at simplebus0 not configured
> "timer" at simplebus0 not configured
> "timer" at simplebus0 not configured
> "timer" at simplebus0 not configured
> "timer" at simplebus0 not configured
> "timer" at simplebus0 not configured
> "timer" at simplebus0 not configured
> "timer" at simplebus0 not configured
> "rtc" at simplebus0 not configured
> "usb" at simplebus0 not configured
> cpsw0 at simplebus0: version 1.12 (0), address 90:59:af:82:2e:7e
> ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI
> 0x0001f0, model 0x000f
> "ocmcram" at simplebus0 not configured
> amdisplay0 at simplebus0
> amdisplay0: no display attached.
> "emif" at simplebus0 not configured
> "sham" at simplebus0 not configured
> "aes" at simplebus0 not configured
> "mcasp" at simplebus0 not configured
> "rng" at simplebus0 not configured
> scsibus0 at sdmmc1: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, MMC02G, 0000> SCSI2 0/direct removable
> sd0: 1832MB, 512 bytes/sector, 3751936 sectors
> scsibus1 at sdmmc0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <SD/MMC, SU32G, 0080> SCSI2 0/direct removable
> sd1: 30436MB, 512 bytes/sector, 62333952 sectors
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> bootfile: sd0a:/bsd
> boot device: sd0
> root on sd1a (93aae518915c8841.a) swap on sd1b dump on sd1b
> WARNING: CHECK AND RESET THE DATE!
>
