On 2018/11/16 03:01, Ian Sutton wrote: > On Wed, Nov 14, 2018 at 6:46 PM Guillaume Simon > <guillaume.si...@mailoo.org> wrote: > > I've recently seen there is now a display driver for BBB, but after > > having installed OpenBSD 6.4 on my BBB, I don't succeed to make it work. > > > > I plugged the screen before booting (as written in amdisplay's man > > page), but it remains black on boot. > > amdisplay(4) does not yet attach the system console, however, I am > going to revisit this and see what it would involve to do that. I'll > ping this thread back in a few days with my results. > > You should know that because the USB host controller is not supported > on the BBB (it is some non EHCI compliant OTG thing) amdisplay(4) is a > bit useless since you cannot attach a keyboard/mouse, and without > those, Xenocara will not easily start due to the lack of a input > device.
https://marc.info/?l=openbsd-misc&m=149563712516455&w=2 > > amdisplay/nxphdmi drivers don't appear in the "supported hardware" > > sections of armv7 docs : > > > > Are they not stable enough to be listed ? > > > > Or are they supposed to work flawlessly ? (In this case, I would be very > > happy if someone gives me some pointers to make my display work) > > amdisplay(4) is stable and working. With e.g. a remote X session you > can use amdisplay. I use x2x for this purpose: > > https://ce.gl/hooraydisplay.png >
