Hello again Mark,
Some progress here.
You were right about the USB trouble.
Instead of a USB key I tried to put a sata disk on a USB tray and ran your
image, but it failed too.
same as before no fs0: available.
Then I too the drive out of the usb tray and put it on one of the sata plug
on the macchiatobin, booted again and, voila !
This time I got the OpenBSD prompt right.
here is the log for the record.
Tianocore/EDK2 firmware version MARVELL_EFI
Press ESCAPE for boot options ...
UEFI Interactive Shell v2.2
EDK II
UEFI v2.70 (EDK II, 0x00010000)
Mapping table
FS0: Alias(s):HD0b65535a1:;BLK1:
VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,000054F40000000000)/Sata(0x
1,0xFFFF,0x0)/HD(1,MBR,0x00000000,0x2000,0x2000)
BLK0: Alias(s):
VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,000054F40000000000)/Sata(0x
1,0xFFFF,0x0)
BLK2: Alias(s):
VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,000054F40000000000)/Sata(0x
1,0xFFFF,0x0)/HD(4,MBR,0x00000000,0x4000,0x6800)
BLK3: Alias(s):
VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,00006EF00000000000)/eMMC(0x
0)/Ctrl(0x0)
BLK4: Alias(s):
VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,00006EF00000000000)/eMMC(0x
0)/Ctrl(0x1)
BLK5: Alias(s):
VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,00006EF00000000000)/eMMC(0x
0)/Ctrl(0x2)
BLK6: Alias(s):
VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,000078F20000000000)/SD(0x0)
Press ESC in 1 seconds to skip startup.nsh or any other key to continue.
Shell> bootaa64.efi
>> OpenBSD/arm64 BOOTAA64 0.13
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 2696864+410652+8951776+739752
[202623+96+324624+179996]=0xfea
fd8
type 0x2 pa 0x0 va 0x0 pages 0x4000 attr 0xe
type 0x7 pa 0x4200000 va 0x0 pages 0x33e00 attr 0xe
type 0x4 pa 0x38000000 va 0x0 pages 0x20 attr 0xe
type 0x7 pa 0x38020000 va 0x0 pages 0x78d8 attr 0xe
type 0x4 pa 0x3f8f8000 va 0x0 pages 0x20 attr 0xe
type 0x3 pa 0x3f918000 va 0x0 pages 0x4e attr 0xe
type 0x4 pa 0x3f966000 va 0x0 pages 0x67c attr 0xe
type 0x3 pa 0x3ffe2000 va 0x0 pages 0x1c attr 0xe
type 0x4 pa 0x3fffe000 va 0x0 pages 0x2 attr 0xe
type 0x7 pa 0x40000000 va 0x0 pages 0x75922 attr 0xe
type 0x2 pa 0xb5922000 va 0x0 pages 0xcd2 attr 0xe
type 0x1 pa 0xb65f4000 va 0x0 pages 0xfc attr 0xe
type 0x9 pa 0xb66f0000 va 0x0 pages 0x80 attr 0xe
type 0x2 pa 0xb6770000 va 0x0 pages 0x4 attr 0xe
type 0x7 pa 0xb6774000 va 0x0 pages 0x64c6 attr 0xe
type 0x4 pa 0xbcc3a000 va 0x0 pages 0x1 attr 0xe
type 0x7 pa 0xbcc3b000 va 0x0 pages 0x54 attr 0xe
type 0x4 pa 0xbcc8f000 va 0x0 pages 0x22 attr 0xe
type 0x7 pa 0xbccb1000 va 0x0 pages 0x1 attr 0xe
type 0x4 pa 0xbccb2000 va 0x0 pages 0x238e attr 0xe
type 0x7 pa 0xbf040000 va 0x0 pages 0x500 attr 0xe
type 0x3 pa 0xbf540000 va 0x0 pages 0x2d0 attr 0xe
type 0x5 pa 0xbf810000 va 0x1fdd0db000 pages 0x3e0 attr 0x800000000000000e
type 0x7 pa 0xbfbf0000 va 0x0 pages 0x60 attr 0xe
type 0x6 pa 0xbfc50000 va 0x1fdd51b000 pages 0x390 attr 0x800000000000000e
type 0x7 pa 0xbffe0000 va 0x0 pages 0x1f attr 0xe
type 0x4 pa 0xbffff000 va 0x0 pages 0x1 attr 0xe
type 0x7 pa 0x100000000 va 0x0 pages 0x40000 attr 0xe
type 0x0 pa 0x4000000 va 0x0 pages 0x200 attr 0x0
type 0xb pa 0xf4284000 va 0x1fdd8ab000 pages 0x1 attr 0x8000000000000001
type 0xb pa 0xf4700000 va 0x1fdd8ac000 pages 0x1 attr 0x8000000000000001
type 0xb pa 0xf93c0000 va 0x1fdd8ad000 pages 0x30 attr 0x8000000000000001
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2018 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 6.4 (RAMDISK) #501: Fri Oct 12 23:33:30 MDT 2018
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 4222169088 (4026MB)
avail mem = 4053790720 (3865MB)
mainbus0 at root: Marvell 8040 MACCHIATOBin
cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p1
cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.7
efi0: EDK II rev 0x10000
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
simplebus0 at mainbus0: "ap806"
simplebus1 at simplebus0: "config-space"
ampintc0 at simplebus1 nirq 352, ncpu 4: "interrupt-controller"
ampintcmsi0 at ampintc0: nspi 32
ampintcmsi1 at ampintc0: nspi 32
ampintcmsi2 at ampintc0: nspi 32
ampintcmsi3 at ampintc0: nspi 32
syscon0 at simplebus1: "system-controller"
mvclock0 at syscon0
mvpinctrl0 at syscon0
mvgpio0 at syscon0
agtimer0 at simplebus1: tick rate 25000 KHz
com0 at simplebus1: ns16550, no working fifo
com0: console
simplebus2 at mainbus0: "cp0"
simplebus3 at simplebus2: "config-space"
mvicu0 at simplebus3
syscon1 at simplebus3: "system-controller"
mvclock1 at syscon1
mvgpio1 at syscon1
xhci0 at simplebus3, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev
3.00/1.00 addr 1
xhci1 at simplebus3, xHCI 1.0
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev
3.00/1.00 addr 1
ahci0 at simplebus3: AHCI 1.0
scsibus0 at ahci0: 32 targets
sxitwi0 at simplebus3
iic0 at sxitwi0
sxitwi1 at simplebus3
iic1 at sxitwi1
"nxp,pca9548" at iic1 addr 0x70 not configured
com1 at simplebus3: ns16550, no working fifo
mvrng0 at simplebus3
dwpcie0 at simplebus2
pci0 at dwpcie0
ppb0 at pci0 dev 0 function 0 "Marvell ARMADA 7K/8K Root Complex" rev 0x00
pci1 at ppb0 bus 1
simplebus4 at mainbus0: "cp1"
simplebus5 at simplebus4: "config-space"
mvicu1 at simplebus5
syscon2 at simplebus5: "system-controller"
mvclock2 at syscon2
mvgpio2 at syscon2
xhci2 at simplebus5, xHCI 1.0
usb2 at xhci2: USB revision 3.0
uhub2 at usb2 configuration 1 interface 0 "Generic xHCI root hub" rev
3.00/1.00 addr 1
ahci1 at simplebus5: AHCI 1.0
ahci1: port busy after first PMP probe FIS
ahci1: port busy after first PMP probe FIS
ahci1: port 1: 3.0Gb/s
scsibus1 at ahci1: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, OCZ-AGILITY2, 1.35> SCSI3 0/direct fixed
naa.5e83a97f29180002
sd0: 57241MB, 512 bytes/sector, 117231408 sectors, thin
com2 at simplebus5: ns16550, no working fifo
mvrng1 at simplebus5
softraid0 at root
scsibus2 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on rd0a swap on rd0b dump on rd0b
WARNING: clock lost 17624 days
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/arm64 6.4 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? s
#
It seems really that the USB support at EFI/u-boot level have to be
perfected.
I'll continue my tinkering and put my results here if something important or
interesting pops out.
--
Sent from:
http://openbsd-archive.7691.n7.nabble.com/openbsd-port-arm-f206279.html
