Hello List, I am trying to install current snapshot on a Raspberry 3 B. I have problems setting up the serial communication needed to access the installer. I connected the serial pins (6,8,10) to the serial port of my PC and set parameters to 115200/8N1. But I only see garbage on the screen. While googling for a solution I found some hints about the Raspi using bizarre baud rates depending on the system clock.
Following is my boot/config.txt with the core_freq line added by me: arm_control=0x200 enable_uart=1 core_freq=250 device_tree_address=0x100 kernel=u-boot.bin Of course I tried different baud rates, but to no avail. I am using minicom on a intel PC running Mac OS. Is this still a known issue? I found no hints about this in the OpenBSD install documents for ARM. Can someone please help? -Heinrich
