Thank you for taking interest. I am sorry that I did not make it clear that the two devices were on different i2c busses and so using the same device address (0x76) is not a problem.
-----Original Message----- From: Rob Sciuk [mailto:r...@controlq.com] Sent: Monday, October 30, 2017 11:18 AM To: Stephen Graf <s_g...@telus.net> Cc: artturi....@gmail.com; arm@openbsd.org Subject: Re: problem connecting two BME280 sensors On Mon, 30 Oct 2017, Rob Sciuk wrote: > > Stephen, > > Am I mistaken, or are both the bme0 and bme1 sharing the same i2c > address > (0x76) on the same bus? Perhaps there are jumpers to change the > address of the second sensor to a different address?? > > Just wondering ... > > Cheers, > Rob Sciuk > > Nevermind. Upon closer inspection of the DTC I see that the configurations are on different busses, and the 0x76 refers to the bus rather than the device ... -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -=-=-=-=-=-= Robert Sciuk r...@controlq.com 97 Village Rd. 289.312.1278 Wellesley, ON. N0B 2T0
