On Sun, Jun 11, 2017 at 04:50:07PM -0400, Luke Tidd wrote: > Sorry the entire serial output from the upgrade is not available. > The log lasted below shows the end of the upgrade, and two attempts to > boot bsd and bsd.rd. > I mostly mashed enter during the upgrade like usual. The mirror was > openbsd.cs.toronto.edu. > After mounting my SD card on another machine, I realize apparently I > had installed OpenBSD to the internal memory of the beagle bone. This > post is mostly informational in the event in which I haven't done > something wrong and the new kernel is really causing a problem for > other people. > > > Output from my console server: > Entering charater/text Mode > Escape character is ^] > > Installing base61.tgz 100% |**************************| 53626 KB 03:37 > Installing comp61.tgz 100% |**************************| 42569 KB 02:07 > Installing man61.tgz 100% |**************************| 7148 KB 00:50 > Installing game61.tgz 100% |**************************| 2706 KB 00:14 > Installing xbase61.tgz 100% |**************************| 15377 KB 01:03 > Installing xshare61.tgz 100% |**************************| 4408 KB 00:24 > Installing xfont61.tgz 100% |**************************| 39353 KB 07:03 > Installing xserv61.tgz 100% |**************************| 6614 KB 00:23 > Location of sets? (disk http nfs or 'done') [done] > Location of sets? (disk http nfs or 'done') [done] done > Making all device nodes...done. > > CONGRATULATIONS! Your OpenBSD upgrade has been successfully completed! > To boot the new system, enter 'reboot' at the command prompt. > > # reboot > syncing disks... done > rebooting... > > U-Boot SPL 2017.03 (Mar 26 2017 - 16:58:08) > Trying to boot from MMC1 > MMC partition switch failed > *** Warning - MMC partition switch failed, using default environment > > reading u-boot.img > reading u-boot.img > > > U-Boot 2017.03 (Mar 26 2017 - 16:58:08 -0600) > > CPU : AM335X-GP rev 2.1 > I2C: ready > DRAM: 512 MiB > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > *** Warning - bad CRC, using default environment > > <ethaddr> not set. Validating first E-fuse MAC > Net: cpsw, usb_ether > Press SPACE to abort autoboot in 2 seconds > switch to partitions #0, OK > mmc0 is current device > SD/MMC found on device 0 > reading boot.scr > ** Unable to read file boot.scr ** > reading uEnv.txt > ** Unable to read file uEnv.txt ** > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > reading /am335x-boneblack.dtb > 34643 bytes read in 9 ms (3.7 MiB/s) > Found EFI removable media binary efi/boot/bootarm.efi > reading efi/boot/bootarm.efi > 64556 bytes read in 13 ms (4.7 MiB/s) > ## Starting EFI application at 82000000 ... > Scanning disks on usb... > Scanning disks on mmc... > MMC Device 2 not found > MMC Device 3 not found > Found 6 disks > >> OpenBSD/armv7 BOOTARM 0.5 > boot> > booting sd0a:/bsd: 3860848+161316+491028 [80+511408+240104]=0x506dbc > > OpenBSD/armv7 booting ... > arg0 0x806dbc arg1 0xe05 arg2 0x88000000 > Allocating page tables > freestart = 0xc0807000, free_pages = 915449 (0x000df7f9) > panic: initarm: out of memory > > > U-Boot 2017.03 (Mar 26 2017 - 16:58:08 -0600) > > CPU : AM335X-GP rev 2.1 > I2C: ready > DRAM: 512 MiB > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > *** Warning - bad CRC, using default environment > > <ethaddr> not set. Validating first E-fuse MAC > Net: cpsw, usb_ether > Press SPACE to abort autoboot in 2 seconds > switch to partitions #0, OK > mmc0 is current device > SD/MMC found on device 0 > reading boot.scr > ** Unable to read file boot.scr ** > reading uEnv.txt > ** Unable to read file uEnv.txt ** > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > reading /am335x-boneblack.dtb > 34643 bytes read in 9 ms (3.7 MiB/s) > Found EFI removable media binary efi/boot/bootarm.efi > reading efi/boot/bootarm.efi > 64556 bytes read in 14 ms (4.4 MiB/s) > ## Starting EFI application at 82000000 ... > Scanning disks on usb... > Scanning disks on mmc... > MMC Device 2 not found > MMC Device 3 not found > Found 6 disks > >> OpenBSD/armv7 BOOTARM 0.5 > boot> bsd.rd > booting sd0a:bsd.rd: 2176476+7984008+439148 [80+305648+145631]=0xa8ebb0 > > OpenBSD/armv7 booting ... > arg0 0xd8ebb0 arg1 0xe05 arg2 0x88000000 > Allocating page tables > freestart = 0xc0d8f000, free_pages = 914033 (0x000df271) > panic: initarm: out of memory > The operating system has halted. > Please press any key to reboot. >
Yes, sorry, I f'd up. The change was already backouted, you only need to recompile and install efiboot/BOOTARM.EFI. Hopefully that's in the next snap. Patrick
