Would you happen to know where to obtain a suitable image to use? I took a wild stab at it and extracted from the firmware image found at https://github.com/apritzel/pine64/tree/master/images and flashed that to the SD card - it now boots, but it seems like the checksum for the u-boot.bin supplied in the miniroot filesystem does not match what the boot0 expects.
On Sat, Feb 18, 2017 at 5:06 PM, Jonathan Gray <j...@jsg.id.au> wrote: > On Sat, Feb 18, 2017 at 04:30:54PM +0100, stolen data wrote: > > Hi, > > > > I just put miniroot60.fs of the ARM64 snapshot released two days go onto > a > > microSD card, copied the relevant dtb-files to the root > > (sun50i-a64-pine64.dtb, sun50i-a64-pine64-plus.dtb), and I'm now trying > to > > get my Pine64+ 1GB board to boot but it's a no-go. There's nothing coming > > off the serial port, not a single character. > > > > It is the default UART0 being used, right? Is there something else I need > > to do in order to boot from SD card? > > The miniroot does not contain the boot0/atf/u-boot for pine64. > > You'll need to build or obtain pine64.img and dd at at the appropriate > offset. > > Hopefully the situation will be less of a mess when the u-boot spl can > replace boot0 and everything can be combined into a u-boot fit image. >
