2016-12-23 21:26 GMT-02:00 Mark Kettenis <mark.kette...@xs4all.nl>:
>
> The H3 support is still somewhat under development. My H3-based
> Banana Pi M2+ had similar sd/mmc issues which I tracked down to a
> problem with the lack of pull-ups in the device tree. See the diff
> below. You might have to make similar changes to the device tree of
> the Orange Pi One to make it work. That requires rebuilding u-boot.
Thanks Mark, with this patch, now boot is working. But without disk detected.
next works... :)
Welcome to the OpenBSD/armv7 6.0 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? s
# dmesg
OpenBSD 6.0-current (RAMDISK) #0: Mon Oct 31 15:19:56 MDT 2016
dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/RAMDISK
real mem = 268435456 (256MB)
avail mem = 248795136 (237MB)
mainbus0 at root: Xunlong Orange Pi PC
cpu0 at mainbus0: ARM Cortex A7 rev 5 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(32b/l,2way) I-cache, 32KB(64b/l,4way) wr-back D-cache
cortex0 at mainbus0
agtimer0 at mainbus0: tick rate 24000 KHz
sxiccmu0 at mainbus0
simplebus0 at mainbus0: "soc"
sxiccmu1 at simplebus0
sxipio0 at simplebus0: 94 pins
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Allwinner EHCI root hub"
rev 2.00/1.00 addr 1
ehci1 at simplebus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Allwinner EHCI root hub"
rev 2.00/1.00 addr 1
ehci2 at simplebus0
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Allwinner EHCI root hub"
rev 2.00/1.00 addr 1
sxidog0 at simplebus0
com0 at simplebus0: ns16550, no working fifo
com0: console
ampintc0 at simplebus0 nirq 160
gpio0 at sxipio0: 18 pins
gpio1 at sxipio0: 24 pins
gpio2 at sxipio0: 25 pins
gpio3 at sxipio0: 28 pins
gpio4 at sxipio0: 12 pins
gpio5 at sxipio0: 6 pins
gpio6 at sxipio0: 12 pins
gpio7 at sxipio0: 28 pins
gpio8 at sxipio0: 22 pins
boot device: lookup 'sd0a:/bsd' failed.
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
--
Luiz Gustavo Costa | +55 (21) 9-8834-6998
-----------------------------------------------------------------
Mundounix - Consultoria em Software Livre
http://www.mundounix.com.br
Skype: mundounix
