On miércoles, 5 de octubre de 2016 2:03:04 (CEST) alexandr_...@ukr.net wrote: > After installation of openbsd, hdmi will work?
No, you will need the serial cable. > > > 1 жовтня 2016, 22:56:06, від "Juan Francisco Cantero Hurtado" < > i...@juanfra.info >: > > We don't have support for the HDMI port. You need a serial cable > https://linux-sunxi.org/UART . > > On viernes, 30 de septiembre de 2016 22:39:49 (CEST) > > alexandr_...@ukr.net wrote: > > Juan, thank you! I downloaded files from link. I tried use the > > > > u-boot image for my board with dd > > > > $ sudo dd > > if=/media/Transcend_680MB/share/u-boot/Linksprite_pcDuino/u-boot.img > > of=/dev/mmcblk0 bs=1024 seek=8 then replace dtb file on > > sun4i-a10-pcduino.dtb > > $ sudo cp sun4i-a10-pcduino.dtb /mnt > > And after reboot board not load from sd card. Then I installed > > u-boot-sunxi-with-spl.bin. Board load but problem stay - > > installation process end after 2 rows after start, result on foto > > (with_sun4i_dtb.jpg) Problem 2 - libfdt fdt_check_header(): > > FDT_ERR_BADMAGIC - absand :) Please help. > > > > 30 вересня 2016, 04:30:17, від "Juan Francisco Cantero Hurtado" < > > i...@juanfra.info >: > > > > On Thu, Sep 29, 2016 at 04:53:21PM +0300, alexandr_...@ukr.net wrote: > > > I've problem with installation OpenBSD 6.0 on an pcDuino v1 > > > (allwiner A10) - please help. Installation process end after 2 > > > rows > > > after start, result on foto (sorry, not very well foto). "panic" > > > report on foto (bsd9a.jpg will write here): > > > 2 > > > libfdt fdt_check_header(): FDT_ERR_BADMAGIC > > > > > > 1 > > > > > > >> OpenBSD/armv7 BOOTARM 0.1 > > > > > > boot> > > > cannot open sd0a:/etc/random.seed: No such file or directory > > > booting sd0a:/bsd: 2094344+7928824+428472 > > > [64+297600+142893]=0xa64014 > > > > > > and end :( > > > > > > > > > I prepared sd under linux: > > > $ sudo dd > > > if=/home/ubuntu/Desktop/pcDuino/OpenBSD/miniroot-cubie-60.fs > > > of=/dev/mmcblk0 $sudo dd > > > if=/home/ubuntu/Desktop/pcDuino/7.2016_U-boot/Linksprite_pcDuino/u > > > - > > > boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8 > > > > > > > > > Image miniroot-cubie-60.fs download yarstadey. > > > > > > Please help. > > > > Download and untar this file > > > > http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/u-bo > > ot > > > > -2016.09.tgz . Use the u-boot image for your board with dd. > > > > Mount the FAT partition on Linux and delete the dtb file. Then untar > > this file > > > > http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/dtb-> > 4 > > .> > > 7.tgz and copy the correct dtb to the FAT partition. -- Juan Francisco Cantero Hurtado http://juanfra.info
