On Sep 05 20:50:01, j...@jsg.id.au wrote:
> Fixed in http://marc.info/?l=openbsd-cvs&m=147299292309164&w=2
>
> There is unlikely to be another snapshot for a few days now
> though as everyone who builds them is travelling.
The Sep 7 snapshot indeed solves this, tahnks.
Jan
> On Mon, Sep 05, 2016 at 12:32:25PM +0200, Jan Stary wrote:
> > This is the latest miniroot-am335x-60.fs (Sep 4 from ftp.openbsd.org)
> > installing on BBB from the SD card. The installation eventually fails with
> >
> > //install: doas: not found
> >
> > Is this simply an omission?
> > Or am I missing something obvious?
> >
> > Jan
> >
> >
> >
> >
> > Script started on Mon Sep 5 12:26:59 2016
> > #
> > # cu -l /dev/ttyU0 -115200
> > Connected to /dev/ttyU0 (speed 115200)
> >
> > # install
> > At any prompt except password prompts you can escape to a shell by
> > typing '!'. Default answers are shown in []'s and are selected by
> > pressing RETURN. You can exit this program at any time by pressing
> > Control-C, but this can leave your system in an inconsistent state.
> >
> > Terminal type? [vt220]
> > System hostname? (short form, e.g. 'foo') [bbb]
> >
> > Available network interfaces are: cpsw0.
> > Which network interface do you wish to configure? (or 'done') [cpsw0]
> > IPv4 address for cpsw0? (or 'dhcp' or 'none') [dhcp]
> > DHCPREQUEST on cpsw0 to 255.255.255.255
> > DHCPACK from 192.168.44.1 (68:05:ca:33:6a:61)
> > bound to 192.168.44.2 -- renewal in 300 seconds.
> > IPv6 address for cpsw0? (or 'rtsol' or 'none') [none]
> > Available network interfaces are: cpsw0.
> > Which network interface do you wish to configure? (or 'done') [done]
> > Using DNS domainname stare.cz
> > Using DNS nameservers at 192.168.44.1 147.32.232.234
> >
> > Password for root account? (will not echo)
> > Password for root account? (again)
> > Start sshd(8) by default? [yes]
> > Setup a user? (enter a lower-case loginname, or 'no') [no]
> > Since no user was setup, root logins via sshd(8) might be useful.
> > WARNING: root is targeted by password guessing attacks, pubkeys are safer.
> > Allow root ssh login? (yes, no, prohibit-password) [no]
> >
> > Available disks are: sd0 sd1.
> > Which disk is the root disk? ('?' for details) [sd0] ?
> > sd0: SD/MMC (15.6G)
> > sd1: SD/MMC MMC02G (1.8G)
> > Available disks are: sd0 sd1.
> > Which disk is the root disk? ('?' for details) [sd0] sd1
> > Disk: sd1 geometry: 233/255/63 [3751936 Sectors]
> > Offset: 0 Signature: 0xAA55
> > Starting Ending LBA Info:
> > #: id C H S - C H S [ start: size ]
> > -------------------------------------------------------------------------------
> > *0: 0C 0 32 33 - 2 42 40 [ 2048: 32768 ]
> > Win95 FAT32L
> > 1: 00 0 0 0 - 0 0 0 [ 0: 0 ]
> > unused
> > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ]
> > unused
> > 3: A6 2 42 41 - 233 139 34 [ 34816: 3717120 ]
> > OpenBSD
> > Use (W)hole disk$ or (E)dit the MBR? [whole] w
> > Creating a msdos partition and an OpenBSD partition for rest of sd1...done.
> > /dev/rsd1i: 32668 sectors in 8167 FAT16 clusters (2048 bytes/cluster)
> > bps=512 spc=4 res=1 nft=2 rde=512 sec=32768 mid=0xf8 spf=32 spt=63 hds=255
> > hid=2048
> > The auto-allocated layout for sd1 is:
> > # size offset fstype [fsize bsize cpg]
> > a: 1758.3M 34816 4.2BSD 2048 16384 1 # /
> > b: 56.7M 3635744 swap
> > c: 1832.0M 0 unused
> > i: 16.0M 2048 MSDOS
> > Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] a
> > /dev/rsd1a: 1758.3MB in 3600928 sectors of 512 bytes
> > 9 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> > Available disks are: sd0.
> > Which disk do you wish to initialize? (or 'done') [done]
> > /dev/sd1a (0410d1c6ebccbaed.a) on /mnt type ffs (rw, asynchronous, local)
> >
> > Let's install the sets!
> > Location of sets? (disk http nfs or 'done') [http]
> > HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none]
> > (Unable to get list from ftp.openbsd.org, but that is OK)
> > HTTP Server? (hostname or 'done') ftp.openbsd.org
> > Server directory? [pub/OpenBSD/snapshots/armv7]
> > //install: doas: not found
> > Looked at http://ftp.openbsd.org/pub/OpenBSD/snapshots/armv7 and found no
> > OpenBSD/armv7 6.0 sets. The set names looked for were:
> > bsd comp60.tgz xshare60.tgz site60-bbb.tgz
> > bsd.rd man60.tgz xfont60.tgz
> > bsd.mp game60.tgz xserv60.tgz
> > base60.tgz xbase60.tgz site60.tgz
> >
> > Location of sets? (disk http nfs or 'done') [http] ^C
> >
> > # ^D
> > erase ^?, werase ^W, kill ^U, intr ^C, status ^T
> >
> > Welcome to the OpenBSD/armv7 6.0 installation program.
> > (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? ~.H^HH^H
> > (I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
> > [EOT]
> > #
> > # ^D
> >
> > Script done on Mon Sep 5 12:28:40 2016
> >
