Hi, 1) Read the FAQ for the definition of stable, snapshots and development. In short, I am running 5.9.
2) My BBB (a Element 14 / Farnell version) seems to boot happily from the mmc card without prompting so I can't provide definite advice here. Personally, I would be holding the button down until I saw the BBB boot from the MMC card. 3) I use kermit (in ports). I have a physical serial port but /dev/U0 would be my guess. set port /dev/ttyU0 set speed 115200 set carrier-watch off set flow-control none c Good luck. Simon. On 2 September 2016 at 19:16, Tuyosi T <nakajin.fu...@gmail.com> wrote: > hi all . > > as BBB beginner i have 3 questions > > 1) which miniroot-am335x virsion is easy ? > 6.0 , 5.9 , 5.8 or snapshots > > 2) how long time do i need pushing switch S2 ? > 3 seconds , 10 seconds or more > > 3) which /dev is good with ' USB to UART TTL connecter ' ? > i think 'cu -l cua00 -s 115200 ' is not good . > > ----- > regards > -- Simon -- ------------------------------------------------------------------------ "Well, an engineer is not concerned with the truth; that is left to philosophers and theologians: the prime concern of an engineer is the utility of the final product." Lectures on the Electrical Properties of Materials, L.Solymar, D.Walsh
